Hi,
Somebody can help me to retrieve the command to use in Solaris 8 to display the space free on a Virtual disk created by VVM ?
Thanks very much,
Fabien Renaux (1 Reply)
Hi all,
I have a problem with vxvm volume which is mirror with two disks. when i am try to increase file system, it is throwing an ERROR: can not allocate 5083938 blocks, ERROR: can not able to run vxassist on this volume.
Please find a sutable solutions.
Thanks and Regards
B. Nageswar... (0 Replies)
hy guys
I am new at this thread , i have installed sf 5.0 and wanted to encapsulate root disk but when i get to optionn to enter private region i get this error:
Enter desired private region length
(default: 65536) 512
VxVM ERROR V-5-2-338
The encapsulation operation failed with the... (2 Replies)
Can somebody kindly help me to determine which one i should choose to better manipulate OS volume.
RAID manager or veritas volume manager?
Any critical differences between those two?
Thanks in advance. (5 Replies)
Hiii,
Can any one sugge me best practices for resizing a veritas voulume with vxfs file system?
I tried doing this
vxassist -g stg shrinkto stgvol 209715200
VxVM vxassist ERROR V-5-1-7236 Shrinking a FSGEN or RAID5 usage type volume can result in loss of data. It is recommended... (1 Reply)
Hello there,
I'm going to describe a situation I've got here... feel free to ask away questions and I'll provide what I can if it'll help me get this answered!
When I do a vxdisk list, I see a disk that VxVM calls "disk4" that is listed as "failed was: c1t9d0s2". When I do a format, I can go... (3 Replies)
I have a machine (5.10 Generic_142900-03 sun4u sparc SUNW,Sun-Fire-V210) that we are upgrading the storage and my task is to mirror what is already on the machine to the new disk. I have the disk, it is labeled and ready but I am not sure of the next steps to mirror the existing diskgroup and... (1 Reply)
Hi Experts,
I wanted to extend a veritas file system which is running on veritas cluster and mounted on node2 system.
#hastatus -sum
-- System State Frozen
A node1 running 0
A node2 running 0
-- Group State
-- Group System Probed ... (1 Reply)
Discussion started by: Skmanojkum
1 Replies
LEARN ABOUT HPUX
vx_emerg_start
vx_emerg_start(1M)vx_emerg_start(1M)NAME
vx_emerg_start - start Veritas Volume Manager from recovery media
SYNOPSIS
vx_emerg_start [-m] [-r root_daname] hostname
DESCRIPTION
The vx_emerg_start utility can be used to start Veritas Volume Manager (VxVM) when a system is booted from alternate media, or when a sys-
tem has been booted into Maintenance Mode Boot (MMB) mode. This allows a rootable VxVM configuration to be repaired in the event of a cat-
astrophic failure.
vx_emerg_start verifies that the /etc/vx/volboot file exists, and checks the command-line arguments against the contents of this file.
OPTIONS -m Mounts the root file system contained on the rootvol volume after VxVM has been started. Prior to being mounted, the rootvol volume
is started and fsck is run on the root file system.
-r root_daname
Specifies the disk access name of one of the members of the root disk group that is to be imported. This option can be used to spec-
ify the appropriate root disk group when multiple generations of the same root disk group exist on the system under repair. If this
option is not specified, the desired root disk group may not be imported if multiple disk groups with the same name exist on the sys-
tem, and if one of these disk groups has a more recent timestamp.
ARGUMENTS
hostname
Specifies the system name (nodename) of the host system being repaired. This name is used to allow the desired root disk group to be
imported. It must match the name of the system being repaired, as it is unlikely to be recorded on the recovery media from which you
booted the system.
NOTES
HP-UX Maintenance Mode Boot (MMB) is intended for recovery from catastrophic failures that have prevented the target machine from booting.
If a VxVM root volume is mirrored, only one mirror is active when the system is in MMB mode. Any writes that are made to the root file sys-
tem in this mode can corrupt this file system when both mirrors are subsequently configured.
The vx_emerg_start script allows VxVM to be started while a system is in MMB mode, and marks the non-boot mirror plexes as stale. This
prevents corruption of the root volume or file system by forcing a subsequent recovery from the boot mirror to the non-boot mirrors to take
place.
USAGE
After VxVM has been started, various recovery options can be performed depending on the nature of the problem. It is recommended that you
use the vxprint command to determine the state of the configuration.
One common problem is when all the plexes of the root disk are stale as shown in the following sample output from vxprint:
v rootvol root DISABLED 393216 - ACTIVE -
pl rootvol-01 rootvol DISABLED 393216 - STALE -
sd rootdisk01-02 rootvol-01 ENABLED 393216 0 - -
pl rootvol-02 rootvol DISABLED 393216 - STALE -
pl rootvol-02 rootvol DISABLED 393216 - STALE -
sd rootdisk02-02 rootvol-02 ENABLED 393216 0 - -
In this case, the volume can usually be repaired by using the vxvol command as shown here:
vxvol -g 4.1ROOT -f start rootvol
If the volume is mirrored, it is put in read-write-back recovery mode. As the command is run in the foreground, it does not exit until the
recovery is complete. It is then recommended that you run fsck on the root file system, and mount it, before attempting to reboot the sys-
tem:
fsck -F vxfs -o full /dev/vx/rdsk/4.1ROOT/rootvol
mkdir /tmp_mnt
mount -F vxfs /dev/vx/dsk/4.1ROOT/rootvol /tmp_mnt
SEE ALSO fsck(1M), mkdir(1M), mount(1M), vxintro(1M), vxprint(1M), vxvol(1M)VxVM 5.0.31.1 24 Mar 2008 vx_emerg_start(1M)