Here is the dd command I'm using that results in the same error that can not find "/usr" on boot:
---------- Post updated at 08:12 AM ---------- Previous update was at 08:08 AM ----------
DukeNuke2,
Yes the script runs without error and I'm able to mount "/usr" from the clone drive and all looks good? I've ran fsck against this slice and no errors being reported. I'm simply looking for a way to clone a boot drive. I'm running this script from single user.
Thanks,
John
Last edited by DukeNuke2; 01-23-2010 at 09:10 AM..
Reason: code tags!
could anyone give me a general idea of how i may clone a 2 Gig disk running Solaris 7 on it to another disk of the same size?
currently, this system only has one disk in it though. i do have the ability to hook up another disk via SCSI.
i have been told i need to boot to "miniroot" to run... (9 Replies)
Disk cloning
I had an external SCSI master disk that I used to clone to an identical external SCSI disk because the other SCSI disk would become corrupted. My original Master became corrupted so I used one of the other to good disk to copy back to the master. Unfortunately the new master needs... (1 Reply)
I have a Sun Solaris 9 and I would like to clone the Operating System from a sun4u Sun Fire 480R machine to a Sun Fire 280R machine. The disk is the same size, the 480R has no space disk slot to the 280R disk for mirrioring, i have no external disk, I am not allowed to take the machine down.
... (1 Reply)
I have a SunOS 5.8 Generic_108528-29 sun4u sparc SUNW,UltraAX-i2, i have 2 scsi disk, the first with the S.O. and the second free.
I read many in the forum about this: with single user, miniroot, dd, flarcreate, ufsdump and ufsrestore.
Which is the best metod?
If i clone the disk with... (6 Replies)
Hi, I'd like to discuss the subject of backing up / cloning Solaris zone.
I was trying to clone zone A to zone B (Solaris 10 11/06: Cloning a Non-Global Zone on the Same System (System Administration Guide: Oracle Solaris Containers-Resource Management and Oracle Solaris Zones)). The first test... (7 Replies)
Hello,
Iam trying to clone AS IS two mounts like below
/class_test/sa
/class_dev/fd
from one server onto another.
I want to use tar and gzip to compress. Please let me know the options I have to use.
Also I want to untar it in the destination server, so let me know how to do... (3 Replies)
What is the best method to use to clone a Redhat machine, to ensure all software and config can be easily installed on new hardware?
Thank you! (3 Replies)
Hi,
I'm a new user of this forum and I'm not an expert of linux.
I have a broken old pc with red hat linux, I clone hdd to another pc with different mainboard and it's ok but it has only one problem, the usb ports not work.
In the boot this message appears:
... (9 Replies)
Hi,
I am trying to clone the hard disk image of Solaris OS on one disk to another disk. After some googling I found that there is a command "dd" to achieve this.
However there is a condition to use the dd command, that the disk geometry of both the disks (source and target disks) should... (5 Replies)
Hello all,
I am trying to clone an entire aix 5.3 machine , not sure on the procedure.Can anyone help on what can be done ?Thanks (9 Replies)
Discussion started by: gull05
9 Replies
LEARN ABOUT FREEBSD
boot.config
BOOT.CONFIG(5) BSD File Formats Manual BOOT.CONFIG(5)NAME
boot.config -- Configuration file for the boot blocks
DESCRIPTION
The boot.config file contains options for the FreeBSD boot block code.
When the FreeBSD boot loader runs, it searches the ``a'' slice of the boot partition for a boot.config file (as a result, slices which are
missing an ``a'' partition require user intervention during the boot process). If the boot.config file is found, its contents are used as
the default configuration options for the boot block code and are echoed to the system console.
A valid format of this file is to put BIOS drive number, a controller type, a unit number, a partition, a kernel file name, and any other
valid boot(8) option on a single line, as it is done at the ``boot:'' prompt.
The options related to the boot image selection described below and all the other options available for boot.config are documented in detail
in the boot(8) manual page.
FILES
/boot.config parameters for the boot blocks (optional)
EXAMPLES
The command:
# echo "-P" > /boot.config
will activate the serial console of FreeBSD.
The command:
# echo "1:ad(1,a)/boot/loader" > /boot.config
will instruct the second stage of boot(8) on the first disk to boot with the third boot(8) stage from the second disk.
The command:
# echo "1:ad(1,a)/boot/loader -P" > /boot.config
will do both of the above.
SEE ALSO boot(8), loader(8)AUTHORS
This manual page was written by Daniel Gerzo <danger@FreeBSD.org>.
BSD May 13, 2007 BSD