Hello All,
A number of UNIX platforms currently bundle clients for the NIS, NIS+, and LDAP services.
I'd like to know how to discover what naming services are available.
E.g., results :
=============================
URL:
service:naming-directory:nis://192.168.1.100/eng.wiz.com
... (0 Replies)
Cannot get my Sun Solaris servers to log into a Brocade 5100. All fiber has been connected correctly and all drivers and firmware are loaded and up to date according to EMCGrab report. Below is an output from server. Please Help:
HBA Port WWN: 2100001b321063c4
OS Device Name: /dev/cfg/c3... (2 Replies)
We have a Sun M5000 connecting to a Brocade SAN switch. I don't know the IP of the Brocade switch and don't want to use its serial port to get the info. How can I find the IP of the Brocade switch under Solaris 10? Snoop is not supported by Solaris multipathing. What other tools can I use to find... (6 Replies)
Hi,
i have a two port hba card in solaris 10 system one of which is disabled. How to enable and configure the other port.
---------- Post updated at 08:17 AM ---------- Previous update was at 03:40 AM ----------
please help :( (7 Replies)
I'm attempting to write a script that will look into a directory, discover all unique names, create directories for their prefix names and place the files inside. I do this now one by one with a simple script but I'd like to automate the process.
The directory would contain something like: ... (6 Replies)
How many pps (packets per second) roughly can average server user maximum use?
I mean if its normal to have like 100 000 pps
a few VPS users there have around 100,000 - 900,000pps
there has been bans for DoS.
PS: how pps value can be discovered and how tracked to causing process?
thx (0 Replies)
Hello;
experienced with HPUX/Linux, but new to Solaris, in particular my newly inherited SunOS 5.10 and is in a san environment
I have access to a 20gb lun, how do I discover it (and is a reboot required)
when discovered how do I configure it as a whole disk mount point (1 Reply)
I have my Windows computer in network 192.168.1.0/24 plugged into one interface of my router.
I have another port on the router as network 192.168.168.0/24 where my nas is plugged in.
Now Windows doesn't discover my NAS automatically, of course. Anyone know what would be the most elegant way to... (2 Replies)
Discussion started by: awayand
2 Replies
LEARN ABOUT DEBIAN
fence_brocade
fence_brocade(8) System Manager's Manual fence_brocade(8)NAME
fence_brocade - I/O Fencing agent for Brocade FC switches
SYNOPSIS
fence_brocade [OPTION]...
DESCRIPTION
fence_brocade is an I/O Fencing agent which can be used with Brocade FC switches. It logs into a Brocade switch via telnet and disables a
specified port. Disabling the port which a machine is connected to effectively fences that machine. Lengthy telnet connections to the
switch should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions.
fence_brocade accepts options on the command line as well as from stdin. fenced sends parameters through stdin when it execs the agent.
fence_brocade can be run by itself with command line options which is useful for testing.
After a fence operation has taken place the fenced machine can no longer connect to the Brocade FC switch. When the fenced machine is
ready to be brought back into the GFS cluster (after reboot) the port on the Brocade FC switch needs to be enabled. This can be done by
running fence_brocade and specifying the enable action.
Vendor URL: http://www.brocade.com
OPTIONS -a IPaddress
IP address of the switch.
-h Print out a help message describing available options, then exit.
-l login
Login name for the switch.
-n port
The port number to disable on the switch.
-o action
The action required. disable (default) or enable.
-p password
Password for login.
-S path
Full path to an executable to generate the password for login.
-q Quiet mode: print only error messages.
-V Print out a version message, then exit.
STDIN PARAMETERS
agent = < param >
This option is used by fence_node(8) and is ignored by fence_brocade.
ipaddr = < hostname | ip >
IP address or hostname of the switch.
login = < param >
Login name.
option = < param >
The action required. disable (default) or enable.
passwd = < param >
Password for login.
passwd_script = < param >
Full path to an executable to generate the password for login.
port = < param >
The port number to disable on the switch.
SEE ALSO fence(8), fence_node(8)fence_brocade(8)