I've been researching minimizeing Solaris 8 and found that on the web page http://www.sun.com/bigadmin/content/packagelist/s8u7PkgList/p2.html the package SUNWglmr
is listed as "rasctrl environment monitoring driver for i2c, (Root) (32-bit)" while in the document "Solaris 8 minimize-updt1.pdf"... (1 Reply)
Hi,
I want to check if a device is mounted before performing actual mount. I was able to check that using the below C code. But in C++ it is throwing the following error:
" error: invalid conversion from `int' to `const char*' "
C program just generated a warning message, but C++ throws... (3 Replies)
Hi,
I am running Suse on a fujitsu server. The problem is that it will no fully load the usb external disk. When plugged in, dmesg shows that indeed a usb disk has been plugged in ,but gives no devpath e.g sda,sdb.
lsusb shows the disk vendor (western digital) but nothing else.Whats goin on... (2 Replies)
Hello,
i am using a solaris thinclient that tries to connecting to a terminalserver. (RDP) Everything works fine, but the usb redirection. If i put in a usb stick i always get 2 usb-drives mounted. If i look in /tmp/SUNWut/mnt/<name of the host> i see 2 devices. One with the name of the... (2 Replies)
Hi,
I wanted to rename a filesystem but I forgot to unmount it before running lvrename and now it is still visible when doing df -k
old name
device:
/dev/mapper/vg01-MGRSTR3
mounted as /MGRSTR3
new name:
/dev/mapper/vg01-mgrusr3
mounted as /mgrusr3
when trying to unmount the old one... (2 Replies)
Discussion started by: galuzan
2 Replies
LEARN ABOUT FREEBSD
if_smsc
SMSC(4) BSD Kernel Interfaces Manual SMSC(4)NAME
smsc -- USB SMSC LAN9xxx Fast Ethernet driver
SYNOPSIS
To load the driver as a module at boot time, place the following line in loader.conf(5):
if_smsc_load="YES"
Alternatively, to compile this driver into the kernel, place the following lines in your kernel configuration file:
device uhci
device ohci
device usb
device miibus
device smsc
DESCRIPTION
The smsc device driver provides support for USB Fast Ethernet adapters based on the SMSC LAN9xxx chipsets.
For more information on configuring this device, see ifconfig(8).
HARDWARE
The following devices are supported by the smsc driver:
o SMSC LAN9500, LAN9500A, LAN9505 and LAN9505A based Ethernet adapters
o SMSC LAN89530, LAN9530 and LAN9730 based Ethernet adapters
o SMSC LAN951x Ethernet adapters with integrated USB hub
SEE ALSO arp(4), intro(4), miibus(4), netintro(4), usb(4), ifconfig(8)HISTORY
The smsc device driver first appeared in FreeBSD 10.0.
AUTHORS
The smsc driver was written by Ben Gray <bgray@FreeBSD.org>.
BSD September 26, 2014 BSD