Not mounted, no-driver USB device in terminal (how to access?) Post: 302387217

5 More Discussions You Might Find Interesting

1. Solaris

SUNWglmr -- rasctrl environment monitoring driver for i2c or SCSI device driver ?

I've been researching minimizeing Solaris 8 and found that on the web page http://www.sun.com/bigadmin/content/packagelist/s8u7PkgList/p2.html the package SUNWglmr is listed as "rasctrl environment monitoring driver for i2c, (Root) (32-bit)" while in the document "Solaris 8 minimize-updt1.pdf"...

2. Programming

Checking if device is mounted..

Hi, I want to check if a device is mounted before performing actual mount. I was able to check that using the below C code. But in C++ it is throwing the following error: " error: invalid conversion from `int' to `const char*' " C program just generated a warning message, but C++ throws...

3. SuSE

External USB disk cannot be mounted

Hi, I am running Suse on a fujitsu server. The problem is that it will no fully load the usb external disk. When plugged in, dmesg shows that indeed a usb disk has been plugged in ,but gives no devpath e.g sda,sdb. lsusb shows the disk vendor (western digital) but nothing else.Whats goin on...

4. Shell Programming and Scripting

1 usb stick -> 2 mounted devices

Hello, i am using a solaris thinclient that tries to connecting to a terminalserver. (RDP) Everything works fine, but the usb redirection. If i put in a usb stick i always get 2 usb-drives mounted. If i look in /tmp/SUNWut/mnt/<name of the host> i see 2 devices. One with the name of the...

5. UNIX for Dummies Questions & Answers

lvrename to a mounted device

Hi, I wanted to rename a filesystem but I forgot to unmount it before running lvrename and now it is still visible when doing df -k old name device: /dev/mapper/vg01-MGRSTR3 mounted as /MGRSTR3 new name: /dev/mapper/vg01-mgrusr3 mounted as /mgrusr3 when trying to unmount the old one...

LEARN ABOUT FREEBSD

uchcom

UCHCOM(4)						   BSD Kernel Interfaces Manual 						 UCHCOM(4)

NAME

     uchcom -- WinChipHead CH341/CH340 serial adapter driver

SYNOPSIS

     To compile this driver into the kernel, place the following lines in your kernel configuration file:

	   device usb
	   device ucom
	   device uchcom

     Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):

	   uchcom_load="YES"

DESCRIPTION

     The uchcom driver provides support for the WinChipHead CH341/CH340 USB-to-RS-232 Bridge chip.

     The device is accessed through the ucom(4) driver which makes it behave like a tty(4).

HARDWARE

     The uchcom driver supports the following adapters:

     o	 HL USB-RS232

SEE ALSO

     tty(4), ucom(4), usb(4)

HISTORY

     The uchcom driver first appeared in NetBSD.  The first FreeBSD release to include it was FreeBSD 8.0.

BUGS

     Actually, this chip seems unable to drive other than 8 data bits and 1 stop bit line.

BSD
								 November 20, 2011							       BSD