I need to configure the iLOM for x4600 server. before I can set the IP details and commit, I need to set network state should be enabled. However my firmware is already the latest and I need not upgrade. I am not able to set the /SP/network state to enable. pls assist. i BELIEVE the bug was fixed in v3.0.3 . So how's this possible here??
Code:
-> show /SP/
/SP
Targets:
alertmgmt
clients
clock
config
console
diag
firmware
logs
network
powermgmt
serial
services
sessions
users
Properties:
check_physical_presence = true
hostname = (none)
reset_to_defaults = none
system_contact = (none)
system_description = SUN FIRE X4600, ILOM v3.0.3.31, r42822
system_identifier = (none)
system_location = (none)
Commands:
cd
reset
set
show
version
-> cd /SP/network
/SP/network
-> set state=enabled
set: Command Failed
---------- Post updated 01-07-10 at 12:35 PM ---------- Previous update was 01-06-10 at 07:32 PM ----------
Any help here??
Last edited by incredible; 01-06-2010 at 07:45 AM..
I 've 2 different T5220 and both are showing different prompts when i ssh to the console.
1. Shows sc> ALOM
2. Shows -> ILOM
as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ?
and i found that we... (6 Replies)
I bought a new Netra X4450 and this is my first time experience with intel based Sun server. I powered on the machine and went through the Sun wizard to complete OS configuration. Now I am on the root prompt and trying to get to the ILOM. On Sparc based servers I used to be able to go to the ILOM... (4 Replies)
One of my X4600 server had a power loss and rebooted and now its giving me a strange problem servers internal disk controller naming has changed by itself ... the after failsafe boot md.conf file shows following c3txdx but shows internal disk at c4txdx ... what could be the reason for this and... (1 Reply)
Hi,
I am just confused with iLOM. Is iLOM is applicable for SPARC as well as X86 servers?? which are having CMM. Hope ALOM will be applicable for rest of the servers like v240 kind of series.
Can any one pls clarify this??
Thanks in Advance
Vaisakh K S (3 Replies)
Hi Folks,
Has anyone seen these errors on bootup.
Mar 15 12:22:30 svc.startd: svc:/system/device/local:default: Method "/lib/svc/method/devices-local" failed due to signal SEGV.ht (c) 1983, 2010,
Oracle and/or its affiliates. All rights reserved.
Configuring devices. ... (1 Reply)
Hi
I have a new SUN X4270 server. I am trying to login to the server's ILOM using it's serial management port from a Windows machine but am not getting any login prompt from the server.
I am using a RJ-45/DB-9 adaptor. After connecting the adaptor, I am opening the serial connection using... (3 Replies)
Booting and checking BIOS there is no option to enable-disable hyperthreading.
I have 8 Dual-Core AMD Opteron(tm) Processor 8220 and I see 16 cores.
Enable hyperthreading I should have 32 cores.
I have red hat 5.4 installed.
Anyone know how can enable hypethreading ? I have last BIOS/Firmware... (2 Replies)
Hi All,
I am having an Sun fire X4600 M2 server where one of the interfaces is down.
I had requested for the replacement but had a bit problem in identifying the port.
As per the server service module, there are 4 NIC ports and one port is not flashing (e1000g0) but as per server, the port... (8 Replies)
Dear all
would you tell me the command in ILOM to :
- Check for error logged in ILOM ouput
- Check for system uptime (DAYS)
- Check for system reboot logged (Last system reboot)
Thank you (1 Reply)
Discussion started by: gema.utama
1 Replies
LEARN ABOUT SUNOS
gnome-network-preferences
gnome-network-preferences(1) User Commands gnome-network-preferences(1)NAME
gnome-network-preferences - configure network proxy
SYNOPSIS
gnome-network-preferences [gnome-std-options]
DESCRIPTION
The Network Proxy preference tool enables you to configure how your system connects to networks. You can configure the desktop to connect
to a proxy server, and specify the details of the proxy server. A proxy server is a server that intercepts requests to another server, and
fulfills the request itself, if it can. You can enter the Domain Name Service (DNS) name or the Internet Protocol (IP) address of the proxy
server.
OPTIONS
The following options are supported:
gnome-std-optionStandard options available for use with most GNOME applications. See gnome-std-options(5).
EXAMPLES
Example 1: Launching the Network Proxy preference tool
example% gnome-network-preferences
EXIT STATUS
The following exit values are returned:
0 Application exited successfully
>0 Application exited with failure
FILES
The following files are used by this application:
/usr/bin/gnome-network-pExecutable for Network Proxy preferences tool
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+------------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+------------------------------+
|Availability |SUNWgnome-desktop-preferences |
+-----------------------------+------------------------------+
|Interface stability |External |
+-----------------------------+------------------------------+
SEE ALSO
Preference Tools Manual
Latest version of the GNOME Desktop User Guide for your platform.
gnome-std-options(5)NOTES
Written by Glynn Foster, Sun Microsystems Inc., 2003.
SunOS 5.10 2 Oct 2003 gnome-network-preferences(1)
01-07-2010
x4600 iLOM issue
