12-30-2009
Thanks!
Hi all.... sorry for this very long delay, but I went on a trip.
After acknowledging the anwser of Zaxxon, I realized that I could solve my particulary problem by writing two scripts on the two servers I wanted to copy from using ftp, since the issue was that I could not connect through ftp from server 1 (the server I needed to
copy to), but it was possible to connect through ftp from the other servers (the ones I wanted to
copy from).
Hope this is not confusing....
Anyway, by writing this
two scripts, and using the put command, I worked out my problem in time so I could go on my vacations without a guilty conscience...
But ofcourse the ideia was to write just
one script on the main server, so thats why I posted this question, but it seemes that ssh and sftp will not allow to work in scripts without promping the user and password, only the use of public/private keys...
Anyway, and once again, your help was preciouse and again sorry for so late replay from me.
Thank you all
P.S. By the way, in case I could not use ftp on either direction, and the use of public/private keys was not an option (case where the server are crucial and very sensible to errors one might do, and the perimission to mingle with the .ssh directory is not recommended) there is absolutly no way to write scripts capable of copying files from other servers??!! Just a question, since I found nothing satisfying on net....
10 More Discussions You Might Find Interesting
1. Windows & DOS: Issues & Discussions
Hello all,
I have a bit of trouble working a passwordless SSH from UNIX to Cygwin running windows 2k3. Here are some details. I AM able to SSH from the Windows box to the UNIX box using the keys. Also, I'm able to SSH from UNIX to Windows w/o the keys. However, when I try to do it with the keys... (9 Replies)
Discussion started by: kclerks11
9 Replies
2. UNIX for Dummies Questions & Answers
Hi everyone,
I have a quick/newb question:
I know that a public key is used to encrypt data and a private key is used to decrypt data but who keeps the public/private keys??
Does the Web Server hold both?
Does the Web Server have the public key and does the client have the private key? ... (3 Replies)
Discussion started by: tical00
3 Replies
3. UNIX for Dummies Questions & Answers
Hi,
please guide me create a public/private key using ssh-keygen, lets say I have been access to server named pngpcdb1with a userid and password ...!!! and also please explain in detail the concept of these keys and ssh as I was planning to use them in ftp related scripts..! Thanks in... (1 Reply)
Discussion started by: rahul125
1 Replies
4. Shell Programming and Scripting
Hi all,
I needed a shell script for file transfering using public/private keys for authentication.
Could you please help me out on this?
A procedure to write a shell script is enough.
Thanks in advance.
Regards.
Vidya N (8 Replies)
Discussion started by: Vidya N
8 Replies
5. Shell Programming and Scripting
Hi All,
I have a query....say on server A, I have generated the Private and Public keys and shared the public key with server B.
Now i can surelyconnect(without password) from server A to server B.....
but can i similarly connect from server B to server A as well
Regards (1 Reply)
Discussion started by: Arpit Narula
1 Replies
6. Shell Programming and Scripting
hi guys , i have few files i have to do sftp, the public and private key work like a magic , no problem at all
the syntax is as below
sftp -0 identityfile=~/ure/blsl/loc2/.ssh/id_rsa_ssh1 ssh1@remote >log_dir/file.timestamp<<end
lcd folder
cd folder
put *
quit
end
================
my... (3 Replies)
Discussion started by: rockymayavia
3 Replies
7. Solaris
Hi i am using solaris 10.I am trying to setup a public/private key but it is not working.Appreciate your repsonse on it
There are two servers DB1 server and DB2 server.
1)I have generated public/private key using below step on both servers.
ssh-keygen -t rsa
2)From DB1 server moved the... (6 Replies)
Discussion started by: muraliinfy04
6 Replies
8. UNIX for Dummies Questions & Answers
Hi,
What tool is used to generate public and private keys for SCP?
Do you have an example script that generates these keys, puts them in files and then another example script that references them from SCP?
Thanks, (9 Replies)
Discussion started by: Astrocloud
9 Replies
9. Shell Programming and Scripting
Hi All,
I have a requirement where i need to check if an rsa public key corresponds to a private key and hence return success or failure. Currently i am using the command
diff <( ssh-keygen -y -e -f "$PRIVKEY" ) <( ssh-keygen -y -e -f "$PUBLICKEY" )
and its solving my purpose. This is in... (1 Reply)
Discussion started by: mritusmoi
1 Replies
10. UNIX for Advanced & Expert Users
Hi,
we have private and public key, encrypt file using public and want to decrypt using private key. can you please advise below commands are correct or other remedy if unix have?
encrypt -a arcfour -k publickey.asc -i TESTFILE.csv -o TESTFILE00.csv
decrypt -a arcfour -k privatekey.asc... (2 Replies)
Discussion started by: rizwan.shaukat
2 Replies
LEARN ABOUT CENTOS
ssh-copy-id
SSH-COPY-ID(1) BSD General Commands Manual SSH-COPY-ID(1)
NAME
ssh-copy-id -- use locally available keys to authorise logins on a remote machine
SYNOPSIS
ssh-copy-id [-n] [-i [identity_file]] [-p port] [-o ssh_option] [user@]hostname
ssh-copy-id -h | -?
DESCRIPTION
ssh-copy-id is a script that uses ssh(1) to log into a remote machine (presumably using a login password, so password authentication should
be enabled, unless you've done some clever use of multiple identities). It assembles a list of one or more fingerprints (as described below)
and tries to log in with each key, to see if any of them are already installed (of course, if you are not using ssh-agent(1) this may result
in you being repeatedly prompted for pass-phrases). It then assembles a list of those that failed to log in, and using ssh, enables logins
with those keys on the remote server. By default it adds the keys by appending them to the remote user's ~/.ssh/authorized_keys (creating
the file, and directory, if necessary). It is also capable of detecting if the remote system is a NetScreen, and using its 'set ssh pka-dsa
key ...' command instead.
The options are as follows:
-i identity_file
Use only the key(s) contained in identity_file (rather than looking for identities via ssh-add(1) or in the default_ID_file). If the
filename does not end in .pub this is added. If the filename is omitted, the default_ID_file is used.
Note that this can be used to ensure that the keys copied have the comment one prefers and/or extra options applied, by ensuring that
the key file has these set as preferred before the copy is attempted.
-n do a dry-run. Instead of installing keys on the remote system simply prints the key(s) that would have been installed.
-h, -? Print Usage summary
-p port, -o ssh_option
These two options are simply passed through untouched, along with their argument, to allow one to set the port or other ssh(1)
options, respectively.
Rather than specifying these as command line options, it is often better to use (per-host) settings in ssh(1)'s configuration file:
ssh_config(5).
Default behaviour without -i, is to check if 'ssh-add -L' provides any output, and if so those keys are used. Note that this results in the
comment on the key being the filename that was given to ssh-add(1) when the key was loaded into your ssh-agent(1) rather than the comment
contained in that file, which is a bit of a shame. Otherwise, if ssh-add(1) provides no keys contents of the default_ID_file will be used.
The default_ID_file is the most recent file that matches: ~/.ssh/id*.pub, (excluding those that match ~/.ssh/*-cert.pub) so if you create a
key that is not the one you want ssh-copy-id to use, just use touch(1) on your preferred key's .pub file to reinstate it as the most recent.
EXAMPLES
If you have already installed keys from one system on a lot of remote hosts, and you then create a new key, on a new client machine, say, it
can be difficult to keep track of which systems on which you've installed the new key. One way of dealing with this is to load both the new
key and old key(s) into your ssh-agent(1). Load the new key first, without the -c option, then load one or more old keys into the agent,
possibly by ssh-ing to the client machine that has that old key, using the -A option to allow agent forwarding:
user@newclient$ ssh-add
user@newclient$ ssh -A old.client
user@oldl$ ssh-add -c
... prompt for pass-phrase ...
user@old$ logoff
user@newclient$ ssh someserver
now, if the new key is installed on the server, you'll be allowed in unprompted, whereas if you only have the old key(s) enabled, you'll be
asked for confirmation, which is your cue to log back out and run
user@newclient$ ssh-copy-id -i someserver
The reason you might want to specify the -i option in this case is to ensure that the comment on the installed key is the one from the .pub
file, rather than just the filename that was loaded into you agent. It also ensures that only the id you intended is installed, rather than
all the keys that you have in your ssh-agent(1). Of course, you can specify another id, or use the contents of the ssh-agent(1) as you pre-
fer.
Having mentioned ssh-add(1)'s -c option, you might consider using this whenever using agent forwarding to avoid your key being hijacked, but
it is much better to instead use ssh(1)'s ProxyCommand and -W option, to bounce through remote servers while always doing direct end-to-end
authentication. This way the middle hop(s) don't get access to your ssh-agent(1). A web search for 'ssh proxycommand nc' should prove
enlightening (N.B. the modern approach is to use the -W option, rather than nc(1)).
ENVIRONMENT
SSH_COPY_ID_LEGACY
If the SSH_COPY_ID_LEGACY environment variable is set, the ssh-copy-id is run in a legacy mode. In this mode, the ssh-copy-id doesn't
check an existence of a private key and doesn't do remote checks of the remote server versions or if public keys are already
installed.
SEE ALSO
ssh(1), ssh-agent(1), sshd(8)
BSD
June 17, 2010 BSD