I use Ubuntu 9.10 Netbook Remix and Intel wimax drivers to connect to wimax networks, but recently I faced with some problems with connection even when the signal is available and it is at some proper level... Here is system log, which may concerns problem occurred:
It happened unexpectedly last evening and I can't find any reason for such circumstances... I suppose it is not linked with any particular Linux OS, but to versions of software I use... I have Intel WiMax link 5150 inside. If any additional information is required I can post it as soon as possible.
---------- Post updated at 23:17 ---------- Previous update was at 02:23 ----------
Solved. The problem was in one of the dhclient configuration files
My current hardware config is:
Processor
1.85 gigahertz AMD Athlon XP
64 kilobyte primary memory cache
512 kilobyte secondary memory cache
HDS722540VLAT20 (41.17 GB) -- C
BENQ DVD DD DW1650 -- E
JLMS XJ-HD166S -- D
3.5" format removeable media -- A
Main Circuit Board
Board:... (1 Reply)
hello
I did install eclipse in ubuntu
when I run it its gives me the following message
The custom VM you have chosen is not a valid executable.
I don't now how to fix it
could you please help me with that
Problem Solved Thanks All (0 Replies)
Hi,
Can anyone please provide the Open Source implmentation of the Following Protocols in Linux Operating Systems.
A. SNMP
B. TCP
C. WIMAX MAC layer protocol.
Thaniks
Saurav (2 Replies)
Hi
Can anyone please tell me how to disable dhclient on redhat host.
I have set static IP to one of my redhat host but I don't know how it changes to some other IP after few hours.
here is the output from ifcfg-eth0 and rc.local
test-123 root # cat... (2 Replies)
Hi all,
I am working in ubuntu for past few weeks .Since I was working in debian I had no problem with arrays.I followed the same method in ubuntu,but is is not working as I expected.
Name="apple"
Name="orange"
print ${Name}
Expected result is apple.But I got a error as "Bad... (8 Replies)
I have a Dell laptop with Ubuntu 10.10 installed in it. The headphone driver is not supportive in my system but it works really well with other laptops like HP.
So my question is that does Ubuntu 10.10 in Dell does not work? Moreover, if i upgrade my system later with 11.04, will the problem... (8 Replies)
Hi
I know the basic about script and sleep processes.
However this is more tricky:
I would like to run
sh -x /sbin/dhclient-script and slow down the output of the script as a whole.
How would you do it?
I would like to delay output on the screen with 1 second for every line for the output... (3 Replies)
ins this a common problem , whenever i try installing a new package or software i usually get this failure msg:
Setting up dsc-statistics-collector (201203250530-1) ...
Adding system user
Warning: The home dir /home/Debian-dsc-statistics you specified already exists.
The system user... (3 Replies)
awk 'NR> 92239 && NR<= 92279' /usr/appplications/access.log
is there a reason why the above command isn't working on kubuntu?
when i run it, i get nothing back. just the prompt. i should see the lines
OS:
3.8.0-19-generic #30-Ubuntu SMP
and yes, there are over 92279 lines in the... (10 Replies)
Does anyone have an idea why it is not possible to logon to a newly created user account in Ubuntu 12.04. Is it perhaps a bug with this distro?
On another machine, but running 12.10 there is no such problem.
Accounts have been created with adduser and with GUI. It makes no difference!
The... (3 Replies)
Discussion started by: Royalist
3 Replies
LEARN ABOUT FREEBSD
if_ix
IXGBE(4) BSD Kernel Interfaces Manual IXGBE(4)NAME
ixgbe -- Intel(R) 10Gb Ethernet driver for the FreeBSD operating system
SYNOPSIS
To compile this driver into the kernel, place the following line in your kernel configuration file:
device ixgbe
Alternatively, to load the driver as a module at boot time, place the following line in loader.conf(5):
if_ixgbe_load="YES"
DESCRIPTION
The ixgbe driver provides support for PCI 10Gb Ethernet adapters based on the Intel 82598EB Intel(R) Network Connections. The driver sup-
ports Jumbo Frames, MSIX, TSO, and RSS.
For questions related to hardware requirements, refer to the documentation supplied with your Intel 10GbE adapter. All hardware requirements
listed apply to use with FreeBSD.
Support for Jumbo Frames is provided via the interface MTU setting. Selecting an MTU larger than 1500 bytes with the ifconfig(8) utility
configures the adapter to receive and transmit Jumbo Frames. The maximum MTU size for Jumbo Frames is 16114.
This driver version supports VLANs. For information on enabling VLANs, see ifconfig(8).
HARDWARE
The ixgbe driver supports the following cards:
o Intel(R) 10 Gigabit XF SR/AF Dual Port Server Adapter
o Intel(R) 10 Gigabit XF SR/LR Server Adapter
o Intel(R) 82598EB 10 Gigabit AF Network Connection
o Intel(R) 82598EB 10 Gigabit AT CX4 Network Connection
DIAGNOSTICS
ixgbe%d: Unable to allocate bus resource: memory A fatal initialization error has occurred.
ixgbe%d: Unable to allocate bus resource: interrupt A fatal initialization error has occurred.
ixgbe%d: watchdog timeout -- resetting The device has stopped responding to the network, or there is a problem with the network connection
(cable).
SUPPORT
For general information and support, go to the Intel support website at: http://support.intel.com.
If an issue is identified with the released source code on the supported kernel with a supported adapter, email the specific information
related to the issue to <freebsd@intel.com>.
SEE ALSO altq(4), arp(4), netintro(4), ng_ether(4), polling(4), vlan(4), ifconfig(8)HISTORY
The ixgbe device driver first appeared in FreeBSD 7.0.
AUTHORS
The ixgbe driver was written by Intel Corporation <freebsd@intel.com>.
BSD December 19, 2010 BSD