2 apps using same port on a single soalris server Post: 302381860

9 More Discussions You Might Find Interesting

1. Solaris

mplayer on soalris

Hi all ... I would like to know how to install mplayer on solaris 10 i have been trying to understand it through the docs on their website but didnt get it that well.. So if anyone can give me step by step instructions to install it ..i would much appreciate it!!! Thanks

2. Solaris

Connect Solaris 10 to NetApp filer using Emulex single port HBAs.

Hi, I'm connecting a Solaris 10 server to a Netapp filer with two single port Emulex (Sun StorageTek PCI-X Enterprise 4GB FC HBA) HBAs. After physically installing both these HBAs what do I ned to do within Solaris 10 to enable them and configure them with persistent bindings. Do I need...

3. Filesystems, Disks and Memory

Backup apps for Windows server, linux clients?

Hi guys. What would you recommend me a software running on Windows, and it is capable for backing up Windows and Linux (unix is optional) machines? The application should have following features: - Encryption. - Authentication - Open source if possible :) ... I found Amanda, but it...

4. Solaris

soft errors in soalris

hi friends, How will you clear the soft error on disk ?

5. UNIX and Linux Applications

New Guy looking for a place to start for UNIX Server and n-tier apps

:o no longer need this.

6. Web Development

How to pass user credentials between apps on the same server?

I have a wordpress site that authenticates against a local ldap database for users to login. On the same server and domain I have subsonic installed that also authenticates against the same ldap database. The ldap database is firewalled front the outside wall and the internal LAN. I would like...

7. Red Hat

Memory conmsumption by Java server is very high on Linux compared to Soalris

Hello All, We have a jave server running on both linux and Solaris environments. On solaris,it consumes only 600-700MB whereas it goes upto 21G in Linux. I am monitoring the memory consumption through top command. Is this high memory consumption expected in Linux?

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

9. Cybersecurity

Server hacked on known port

Hi, There is a recent case whereby it was reported that one of the production servers was hacked on port 1521. However, I am not sure how this was possible, as I checked that the OS firewall (iptables) is on : # /etc/init.d/iptables status Table: nat Chain PREROUTING (policy ACCEPT) num ...

LEARN ABOUT LINUX

install-solaris

install-solaris(1M)													       install-solaris(1M)

NAME

       install-solaris - install the Solaris operating system

SYNOPSIS

       install-solaris

       install-solaris	invokes  the  Solaris  Install	program. Depending on graphical capability and available memory at the time of invocation,
       install-solaris invokes either a text-based installer or a graphical installer.

       The following minimum requirements for physical memory dictate which features are available during installation:

       For SPARC machines:

       128 MB

	   Minimum physical memory for all installation types

       128 MB

	   Minimum physical memory required for windowing system

       384 MB

	   Minimum physical memory required for graphical-based installation

       For x86 machines:

       256 MB

	   Minimum physical memory for all installation types

       256 MB

	   Minimum physical memory required for windowing system

       512 MB

	   Minimum physical memory required for graphical-based installation

       In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number  of  fea-
       tures available.

       install-solaris	exists	only  on  the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the  for more
       details.

       install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
       installation media. Refer to the  for disk space requirements.

       Refer to the  for more information on the various menus and selections.

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWcdrom  (Solaris instal-  |
       |			     |lation media)		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

       pkginfo(1), install(1M), pkgadd(1M), attributes(5)

       It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.

								    23 Sep 2005 					       install-solaris(1M)