Hi,
Please advise me whereas I have two node cluster server configured with MC/SG. Application and DB are running on Node 1, while Node 2 is standby.
All the volume group devices are part of cluster environment. There is only one package running at node 1.
Node 2 is having the problem to... (1 Reply)
This post just as a follow-up for thread https://www.unix.com/aix/115548-hacmp-5-4-aix-5300-10-not-working.html: there was a bug in the clcomdES that would cause the Two-Node-Cluster-Configuration-Assistant to fail even with a correct TCP/IP adapter setup. That affected HACMP 5.4.1 in combinatin... (0 Replies)
Hello
I have problem with scinstall. I found information that i should`t configure public network before using scinstall.
Each node configuration:
4 node, 3 network adapter on each node. 1 for public adapter and 2 for cluster interconnect. Two switches.
After scinstall first node is... (1 Reply)
I am using VMware Workstation-7 on Windows-XP host .
I am trying to configure Solaris 10-X86 guest os based 2 nodes Sun Cluster .
I have added one extra Virtual Lan adapter on my VMware with another subnet (that I would like to put for SUN Cluster private communication).
I have... (0 Replies)
Hi - Please help me to understand the Veritas Cluster fail-over capability.
We configured oracle database file system on veritas cluster file system and it is automatically failing-over from node 1 to node 2.
Does Veritas cluster softward have any option to fail-back from node 2 to node 1... (6 Replies)
Hi Everybody,
I would like to know meaning of following parameters in cluster.conf file in linux
<device name="blade_fence" blade="2" option="off"
<clusternode name="Blade1-int" votes="1" nodeid="1">
what do you mean by "option=off" and "votes=1"
Thanks (1 Reply)
Hi Experts,
I have question regarding linux cluster managment on Red Hat 5.x server. When I try to install 'luci' or 'ricci' in one of our linux servers it is giving me below error:-
yum install luci
Loaded plugins: katello, product-id, rhnplugin, security, subscription-manager
Updating... (0 Replies)
Hello HP-UX experts,
Server = rx8640 Node partition
OS = HP-UX 11.23
arch = IA64
Network switch = Foundry 16 port switch (1Gbps)
Existing configuration: Tough to explain as it is very messy (see below for the link of zip of network related fles). 2 x 2Gbps aggregates configured some time... (1 Reply)
why does my cluster form but fail after a few minutes, or why do my multicast communications stop working after a short amount of time? (1 Reply)
Discussion started by: gema.utama
1 Replies
LEARN ABOUT OPENSOLARIS
clsetup
clsetup(1CL) Sun Cluster Maintenance Commands clsetup(1CL)NAME
clsetup - configure Sun Cluster interactively
SYNOPSIS
/usr/cluster/bin/clsetup -V
/usr/cluster/bin/clsetup -?
/usr/cluster/bin/clsetup [-f logfile]
DESCRIPTION
The clsetup command provides the following configuration capabilities, depending on what state the cluster is in when you issue the com-
mand. The user must be superuser to run this command.
This command has no short form.
o When you run the clsetup command at post-installation time, the command performs initial setup tasks, such as configuring quorum
devices and resetting the installmode property. If you deselected automatic Quroum Configuration when you created the cluster
using either scinstall or the cluster create command, then you must run the clsetup command immediately after the cluster has
been installed. Ensure that all nodes have joined the cluster before you run the clsetup command and reset the installmode prop-
erty.
If you used automatic quorum configuration when you created the cluster, you do not need to run the clsetup command after clus-
ter installation. The automatic quorum configuration feature also resets the installmode property of the cluster.
You can issue this form of the clsetup command from any node in the cluster.
o When you run the clsetup command during normal cluster operation, the scsetup command provides an interactive, menu-driven util-
ity to perform cluster configuration tasks. The following are some of the cluster components which this utility administers:
o Quorum
o Resource groups
o Data services
o Cluster interconnect
o Device groups and volumes
o Private hostnames
o New nodes
o Other cluster properties
You can issue this form of the clsetup command from any node in the cluster.
o When you run the clsetup command from a node that is in noncluster mode, the clsetup command provides a menu-driven utility for
changing and displaying the private IP address range.
You must reboot all nodes into noncluster mode before you start this form of the clsetup utility.
OPTIONS
The following options are supported:
-?
--help
Prints help information for the command.
-f logfile
--file logfile
Specifies the name of a log file to which commands can be logged. If this option is specified, most command sets generated by clsetup
can br run and logged, or just logged, depending on user responses.
-V
--version
Prints the version of the command set. No command line processing will be performed and the command will not enter into its interactive
menu.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWsczu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
SEE ALSO Intro(1CL), cldevicegroup(1CL), clnode(1CL), clquorum(1CL), clreslogicalhostname(1CL), clresourcegroup(1CL), clresourcetype(1CL),
clressharedaddress(1CL), cluster(1CL), cltelemetryattribute(1CL)Sun Cluster 3.2 5 May 2006 clsetup(1CL)