I running HPUX 11.0,
Netscape gives me an error "Unable to locate Server" when using a www.something.com address.
If I use an IP address I get past the router and onto the Internet.
My workstation can get to the Router @ 192.168.0.1 and also it's local APACHE server.
I have DHCP enabled... (8 Replies)
ive installed a fresh copy of solaris 10 on a E3500 Server machine, i gave it a static IP address , 192.168.1.15 its a test server in our office (small office) we are using LINKSYS as our internet router and DHCP as well .. its IP is 192.168.1.1 and ive added this IP as Default route on the server... (9 Replies)
i have just installed solaris 10 on a 60 gb hard drive. now im trying to install my nic driver but when i put in the floppy disk for the nic card it cant read it, so then i found that i have to mount the floppy drive and i tried putting in the mount command but i dont know where to mount it and if... (38 Replies)
Hi,
I am new to Solaris just migrating from Windows XP.
I want to connect to internet but I have problem with configuration.
My ISP has provided me a router.I get internet connection through DHCP.
I don't know any proxy or subnetmask or any IP address that requires during configuration of... (1 Reply)
Hi I installed solaris developer edition 1/08 today.I want to connect to Broadband internet through my ADSL 2+ Modem/Router with a username and password.
plz help in this case,I am new to sun solaris:confused:
the modem itself is a router it worked well on ubuntu and red hat (3 Replies)
HI,
Am using GPRS ( MOB # 3230 ) internet connection in windows
Hw to use internet r connect in linux.. ( Red Hat Linux Ver.10 )
Please help me..
Thanks in adv.. (1 Reply)
I recently installed solaris 10 on a seperate hard disk in my desktop pc. My first hard disk is running windows xp.
I am totally new to solaris. Please help me to connect to the internet through solaris 10. I read a few threads, and re-installed solaris 10 by giving 'Yes' to the question that... (1 Reply)
What all is required so that I can use internet on my Linux OS
My OS: Red Hat Fedora
version: 2.6
I have to connect via my Nokia cell phone via cable.
This way only I had been using internet on my Windows OS.
If any software is required to install on my UNIX for internet, then I don't... (1 Reply)
How to enable internet on my Linux OS
My OS: Red Hat Fedora
Release 9 (Sulphur)
version: 2.6
I have to connect via my Nokia cell phone via cable.
This way only I had been using internet on my Windows OS.
If any software is required to install on my UNIX for internet, then I don't have any. If... (14 Replies)
Discussion started by: ravisingh
14 Replies
LEARN ABOUT DEBIAN
rlm_ippool_tool
RLM_IPPOOL_TOOL(8) System Manager's Manual RLM_IPPOOL_TOOL(8)NAME
rlm_ippool_tool - dump the contents of the FreeRadius ippool database files
SYNOPSIS
If an ipaddress is specified then that address is used to limit the actions or output.
rlm_ippool_tool [-a] [-c] [-o] [-v] session-db index-db [ipaddress]
Mark the entry nasIP/nasPort as having ipaddress
rlm_ippool_tool -n session-db index-db ipaddress nasIP nasPort
Update old format database to new.
rlm_ippool_tool -u session-db new-session-db
DESCRIPTION
rlm_ippool_tool dumps the contents of the FreeRADIUS ippool databases for analyses or for removal of active (stuck?) entries.
Or with the -n argument adds a usage entry to the FreeRADIUS ippool databases.
OPTIONS -a Print all active entries.
-c Report number of active entries.
-r Remove active entries.
-v Verbose report of all entries.
-o Assume old database format (nas/port pair, not md5 output).
-n Mark the entry nasIP/nasPort as having ipaddress.
-u Update old format database to new.
EXAMPLES
Given the syntax in the FreeRadius radiusd.conf:
ippool myippool {
range-start = 192.168.1.0
range-stop = 192.168.1.255
[...]
session-db = ${raddbdir}/ip-pool.db
ip-index = ${raddbdir}/ip-index.db
}
To see the number of active entries in this pool, use:
$ rlm_ippool_tool -c ip-pool.db ip-index.db
13
To see all active entries in this pool, use:
$ rlm_ippool_tool -a ip-pool.db ip-index.db
192.168.1.5
192.168.1.82
192.168.1.244
192.168.1.57
192.168.1.120
192.168.1.27
[...]
To see all information about the active entries in the use, use:
$ rlm_ippool_tool -av ip-pool.db ip-index.db
NAS:172.16.1.1 port:0x2e8 - ipaddr:192.168.1.5 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x17c - ipaddr:192.168.1.82 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x106 - ipaddr:192.168.1.244 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x157 - ipaddr:192.168.1.57 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x2d8 - ipaddr:192.168.1.120 active:1 cli:0 num:1
NAS:172.16.1.1 port:0x162 - ipaddr:192.168.1.27 active:1 cli:0 num:1
[...]
To see only information of one entry, use:
$ rlm_ippool_tool -v ip-pool.db ip-index.db 192.168.1.1
NAS:172.16.1.1 port:0x90 - ipaddr:192.168.1.1 active:0 cli:0 num:0
To add an IP address usage entry, use:
$ rlm_ippool_tool -n ip-pool.db ip-index.db 192.168.1.1 172.16.1.1 0x90
rlm_ippool_tool: Allocating ip to nas/port: 172.16.1.1/144
rlm_ippool_tool: num: 1
rlm_ippool_tool: Allocated ip 192.168.1.1 to client on nas 172.16.1.1,port 144
SEE ALSO radiusd(8)AUTHORS
Currently part of the FreeRADIUS Project (http://www.freeradius.org) Originally by Edwin Groothuis, edwin@mavetju.org
(http://www.mavetju.org)
Mailing list details are at http://www.freeradius.org/
RLM_IPPOOL_TOOL(8)