Hi,
I'm new to HP-UX.
I have LVM on /var with 92Gig. I would like to reduce it to create another LVM for Oracle client with 800 meg or so. How to do it. I'm running 11.iv3
Thanks (4 Replies)
I have an HP blade with Qlogic HBA's connected to an EVA8000. I have downloaded the latest multipath.conf from HP's website. The drive presented to the server appears to be configured and working except the output of "multipath -l" shows for all paths. What is causing this output?
mpath0... (2 Replies)
hello
my centOS newly installed system loading dmraid modules on startup
I did remove all LVM/raid things from system installation menus and after installation too but dmraid is still there
and he says: no raid disks found
also I did modprobe -r dm_raid45 and it do remove it but only until... (7 Replies)
Please consider this a question about basics&best practices. On AIX 5.3 system, three raw physical volumes are defined from storage. While doing a read with command dd from the raw device, the speed rate is 250Mb/s.
Then, it gets complex when I define these three pv's to an lv of type raw. Doing... (4 Replies)
Is there a trick to mounting swap in n a lvm? I can't get it to work.
# swapon -va
swapon on /dev/mapper/VG-lv_swap
swapon: /dev/mapper/VG-lv_swap: found swap signature: version 1, page-size 4, same byte order
swapon: /dev/mapper/VG-lv_swap: pagesize=4096, swapsize=4294967296,... (1 Reply)
Good morning
Recently we needed to change the password from a redhat 6.5 system that no one knew the root password.
Starting the system with the init=/bin/bash method took us to the following scenario:
system_vg active with only root_lv and tmpfs mounted.
our entries at fstab are like... (1 Reply)
Currently I am using this laborious command
lvdisplay | awk '/LV Path/ {p=$3} /LV Name/ {n=$3} /VG Name/ {v=$3} /Block device/ {d=$3; sub(".*:", "/dev/dm-", d); printf "%s\t%s\t%s\n", p, "/dev/mapper/"v"-"n, d}'
Would like to know if there is any shorter method to get this mapping of... (2 Replies)
Discussion started by: royalibrahim
2 Replies
LEARN ABOUT HPUX
vxdestroy_lvmroot
vxdestroy_lvmroot(1M)vxdestroy_lvmroot(1M)NAME
vxdestroy_lvmroot - remove LVM root disk and associated LVM volume group
SYNOPSIS
vxdestroy_lvmroot [-v] [-b] lvm_root_disk
DESCRIPTION
The vxdestroy_lvmroot command tears down and removes the LVM volume group associated with the specified physical disk. This is done by
removing the volumes in the volume group and then removing the volume group.
OPTIONS -b Invokes the setboot command to change the primary boot disk to the VxVM root disk from which the system was booted (if the pri-
mary boot disk is not already set to this disk). The alternate boot device remains unchanged. If the -v option is also speci-
fied, the settings of the primary and alternate boot devices are displayed.
-v Outputs verbose messages including a timestamp that indicates major operations being performed.
ARGUMENTS
lvm_root_disk
Specifies the device name of the LVM root disk that is to be destroyed, along with its entire volume group.
EXAMPLES
This example shows the vxdestroy_lvmroot command invoked in its simpliest form:
/etc/vx/bin/vxdestroy_lvmroot c5t1d0
# /etc/vx/bin/vxdestroy_lvmroot -v -b c3t0d0
Are you sure about destroying c3t0d0 (imported on VG /dev/vg02) ? YES
vxdestroy_lvmroot 06:02: Tearing down /dev/vg02 on device c3t0d0
vxdestroy_lvmroot 06:02:
Unmounting and removing any volumes associated with /dev/vg02
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol1
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol2
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol3
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol4
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol5
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol6
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol7
vxdestroy_lvmroot 06:02: removing logical volume /dev/vg02/lvol8
vxdestroy_lvmroot 06:02: Removing Volume Group /dev/vg02
vxdestroy_lvmroot 06:02: Removing device files in /dev/vg02
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c3t0d0
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d3
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d4
vxdestroy_lvmroot 06:02: Removing LVM Physical Volume c1t1d5
vxdestroy_lvmroot 06:03: Current setboot values:
vxdestroy_lvmroot 06:03: Primary: 0/0/6/0/0.0.0
vxdestroy_lvmroot 06:03: Alternate: 0/0/1/0/0.1.0
vxdestroy_lvmroot 06:03:
Making disk c0t1d0 (0/0/1/0/0.1.0) the primary boot disk
vxdestroy_lvmroot 06:03:
Removal of device c3t0d0, volume group /dev/vg02 was successful
SEE ALSO cpio(1), dd(1), fsck(1M), setboot(1M)vxbootsetup(1M)vxcp_lvmroot(1M)vxres_lvmroot(1M)VxVM 5.0.31.1 24 Mar 2008 vxdestroy_lvmroot(1M)