IPMP Configuration Post: 302377707

Sponsored Content

Operating Systems Solaris IPMP Configuration Post 302377707 by lbreddy on Friday 4th of December 2009 08:07:34 PM

12-04-2009

Registered User

IPMP Configuration

Dear All,

I have configured IPMP in one of my SUN machine which is having solros 9 version. I have updated all files like /etc/hosts,/etc/hostname.ce0 and /etc/hostname.ce1 and rebooted the server. But IP's are not mounted which i have given in /etc/hosts file.

Please find the below ifconfig output and help me to resolve this issue.

Code:

root@HYDREM01 # ifconfig -a
lo0: flags=1000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4> mtu 8232 index 1
        inet 127.0.0.1 netmask ff000000
ce0: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 0.0.0.0 netmask 0
        ether 0:14:4f:85:df:69
ce0:1: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2
        inet 10.209.130.9 netmask ffffff00 broadcast 10.209.130.255
ce1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 3
        inet 0.0.0.0 netmask 0
        ether 0:14:4f:85:df:68

Thanks and Regards,

Lakkireddy BR

Last edited by DukeNuke2; 12-05-2009 at 05:45 AM.. Reason: please use code tags!

lbreddy

View Public Profile for lbreddy

Find all posts by lbreddy

10 More Discussions You Might Find Interesting

1. Solaris

Ipmp

Hi All, Kindly help me in configuring IPMP or guid me to some link, tried goggling however no luck. Thanks in anticipation

2. Solaris

IPMP config

Hi All, I have unplumbed one interface. after that ifconfig -a shows that lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index 1 inet 127.0.0.1 netmask ff000000 e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 2 ...

3. Solaris

IPMP questions

Probe-based IPMP active - active Probe-based IPMP active - passive Link-based only active -standby ???? What are differences between Probe-based IPMP active - passive anddd Link-based only active -standby ???!!! For example in active active probe-based IPMP there are lets...

4. Solaris

setting up IPMP

Guide me in setting up IPMP on solaris 10 box . my system has 2 physical interface bge0 - not used bge1 - 10.10.10.10 bge1:1 - 10.10.10.11 please guide , how can i implement IPMP on this server , how many additional test ip is required ? , as 2 ip's are configured on bge1 interface ,...

5. Solaris

IPMP/HA: most common configuration

Hi, based on your experience what is the most common IPMP configuration on a two nodes cluster for HA failover / scalable services? ...active-active, active-standby with probe-based failure detection etc. Thanks

6. Solaris

IPMP configuration and detach problem

Hi, I've a problem when try to detach nic e1000g1. IPMP configuration: # ifconfig -a ...cut... e1000g1: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 7 inet 0.0.0.0 netmask 0 ether 0:c:29:67:16:ef e1000g2: flags=1000842<BROADCAST,RUNNING,MULTICAST,IPv4>...

7. Solaris

IPMP Configuration

Hi all, Currently i got a server which had two interface. I had study the <SystemAdministration Guide: IP> but still donno what is the correct step to configure it. Can u all help me on it? thanks # ifconfig -a lo0: flags=2001000849<UP,LOOPBACK,RUNNING,MULTICAST,IPv4,VIRTUAL> mtu 8232 index...

8. Solaris

IPMP active-standby configuration

Hi All, Need your help to explaining why when i configure 2 interface IPMP active-standby appear, INACTIVE and DEPRECATED parameter, detail screen shoot as below : root@machine01 # ifconfig -a e1000g0: flags=1000843<UP,BROADCAST,RUNNING,MULTICAST,IPv4> mtu 1500 index 7 inet...

9. Solaris

Solaris IPMP

Can any one please explain me the concept behind IPMP in solaris clustering.Basic explanation would be really appreciated... Thanks in Advance vks

10. Solaris

IPMP Configuration Question/Problem

Hi, I have two physical interface connected to solaris box. 1. e1000g1 2. e1000g2 I have added these interfaced under a same IPMP group "IPMP1" After that I have configured a test address for e1000g1 like below ifconfig e1000g1 addif <ip-address> netmask + broadcast + -failover...

LEARN ABOUT SUNOS

check-hostname

check-hostname(1M)					  System Administration Commands					check-hostname(1M)

NAME

       check-hostname - check if sendmail can determine the system's  fully-qualified host name

SYNOPSIS

	/usr/sbin/check-hostname

DESCRIPTION

       The   check-hostname script is a migration aid for sendmail(1M).  This script tries to determine the local host's fully-qualified host name
       (FQHN) in a manner similar to  sendmail(1M). If	check-hostname is able to determine the FQHN of the local host, it reports success. Other-
       wise,  check-hostname reports how to reconfigure the system so that the	FQHN can be properly determined.

FILES

       /etc/hosts	       Host name database

       /etc/nsswitch.conf      Name service switch configuration file

       /etc/resolv.conf        Configuration file for name server routines

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE	     |	    ATTRIBUTE VALUE	   |
       +-----------------------------+-----------------------------+
       |Availability		     |SUNWsndmu 		   |
       +-----------------------------+-----------------------------+
       |Interface Stability	     |Evolving			   |
       +-----------------------------+-----------------------------+

SEE ALSO

       sendmail(1M), hosts(4), attributes(5)

SunOS 5.10							    10 Nov 2003 						check-hostname(1M)