HTML::Element::traverse(3pm)				User Contributed Perl Documentation			      HTML::Element::traverse(3pm)

NAME

       HTML::Element::traverse - discussion of HTML::Element's traverse method

VERSION

       This document describes version 5.02 of HTML::Element::traverse, released June 27, 2012 as part of HTML-Tree.

SYNOPSIS

	 # $element->traverse is unnecessary and obscure.
	 #   Don't use it in new code.

DESCRIPTION

       "HTML::Element" provides a method "traverse" that traverses the tree and calls user-specified callbacks for each node, in pre- or post-
       order.  However, use of the method is quite superfluous: if you want to recursively visit every node in the tree, it's almost always
       simpler to write a subroutine does just that, than it is to bundle up the pre- and/or post-order code in callbacks for the "traverse"
       method.

EXAMPLES

       Suppose you want to traverse at/under a node $tree and give elements an 'id' attribute unless they already have one.

       You can use the "traverse" method:

	 {
	   my $counter = 'x0000';
	   $start_node->traverse(
	     [ # Callbacks;
	       # pre-order callback:
	       sub {
		 my $x = $_[0];
		 $x->attr('id', $counter++) unless defined $x->attr('id');
		 return HTML::Element::OK; # keep traversing
	       },
	       # post-order callback:
	       undef
	     ],
	     1, # don't call the callbacks for text nodes
	   );
	 }

       or you can just be simple and clear (and not have to understand the calling format for "traverse") by writing a sub that traverses the tree
       by just calling itself:

	 {
	   my $counter = 'x0000';
	   sub give_id {
	     my $x = $_[0];
	     $x->attr('id', $counter++) unless defined $x->attr('id');
	     foreach my $c ($x->content_list) {
	       give_id($c) if ref $c; # ignore text nodes
	     }
	   };
	   give_id($start_node);
	 }

       See, isn't that nice and clear?

       But, if you really need to know:

THE TRAVERSE METHOD

       The "traverse()" method is a general object-method for traversing a tree or subtree and calling user-specified callbacks.  It accepts the
       following syntaxes:

       $h->traverse(&callback)
       or $h->traverse(&callback, $ignore_text)
       or $h->traverse( [&pre_callback,&post_callback] , $ignore_text)

       These all mean to traverse the element and all of its children.	That is, this method starts at node $h, "pre-order visits" $h, traverses
       its children, and then will "post-order visit" $h.  "Visiting" means that the callback routine is called, with these arguments:

	   $_[0] : the node (element or text segment),
	   $_[1] : a startflag, and
	   $_[2] : the depth

       If the $ignore_text parameter is given and true, then the pre-order call will not be happen for text content.

       The startflag is 1 when we enter a node (i.e., in pre-order calls) and 0 when we leave the node (in post-order calls).

       Note, however, that post-order calls don't happen for nodes that are text segments or are elements that are prototypically empty (like
       "br", "hr", etc.).

       If we visit text nodes (i.e., unless $ignore_text is given and true), then when text nodes are visited, we will also pass two extra
       arguments to the callback:

	   $_[3] : the element that's the parent
		    of this text node
	   $_[4] : the index of this text node
		    in its parent's content list

       Note that you can specify that the pre-order routine can be a different routine from the post-order one:

	   $h->traverse( [&pre_callback,&post_callback], ...);

       You can also specify that no post-order calls are to be made, by providing a false value as the post-order routine:

	   $h->traverse([ &pre_callback,0 ], ...);

       And similarly for suppressing pre-order callbacks:

	   $h->traverse([ 0,&post_callback ], ...);

       Note that these two syntaxes specify the same operation:

	   $h->traverse([&foo,&foo], ...);
	   $h->traverse( &foo	     , ...);

       The return values from calls to your pre- or post-order routines are significant, and are used to control recursion into the tree.

       These are the values you can return, listed in descending order of my estimation of their usefulness:

       HTML::Element::OK, 1, or any other true value
	   ...to keep on traversing.

	   Note that "HTML::Element::OK" et al are constants.  So if you're running under "use strict" (as I hope you are), and you say: "return
	   HTML::Element::PRUEN" the compiler will flag this as an error (an unallowable bareword, specifically), whereas if you spell PRUNE
	   correctly, the compiler will not complain.

       undef, 0, '0', '', or HTML::Element::PRUNE
	   ...to block traversing under the current element's content.	(This is ignored if received from a post-order callback, since by then the
	   recursion has already happened.)  If this is returned by a pre-order callback, no post-order callback for the current node will happen.
	   (Recall that if your callback exits with just "return;", it is returning undef -- at least in scalar context, and "traverse" always
	   calls your callbacks in scalar context.)

       HTML::Element::ABORT
	   ...to abort the whole traversal immediately.  This is often useful when you're looking for just the first node in the tree that meets
	   some criterion of yours.

       HTML::Element::PRUNE_UP
	   ...to abort continued traversal into this node and its parent node.	No post-order callback for the current or parent node will happen.

       HTML::Element::PRUNE_SOFTLY
	   Like PRUNE, except that the post-order call for the current node is not blocked.

       Almost every task to do with extracting information from a tree can be expressed in terms of traverse operations (usually in only one pass,
       and usually paying attention to only pre-order, or to only post-order), or operations based on traversing. (In fact, many of the other
       methods in this class are basically calls to traverse() with particular arguments.)

       The source code for HTML::Element and HTML::TreeBuilder contain several examples of the use of the "traverse" method to gather information
       about the content of trees and subtrees.

       (Note: you should not change the structure of a tree while you are traversing it.)

       [End of documentation for the "traverse()" method]

   Traversing with Recursive Anonymous Routines
       Now, if you've been reading Structure and Interpretation of Computer Programs too much, maybe you even want a recursive lambda.	Go ahead:

	 {
	   my $counter = 'x0000';
	   my $give_id;
	   $give_id = sub {
	     my $x = $_[0];
	     $x->attr('id', $counter++) unless defined $x->attr('id');
	     foreach my $c ($x->content_list) {
	       $give_id->($c) if ref $c; # ignore text nodes
	     }
	   };
	   $give_id->($start_node);
	   undef $give_id;
	 }

       It's a bit nutty, and it's still more concise than a call to the "traverse" method!

       It is left as an exercise to the reader to figure out how to do the same thing without using a $give_id symbol at all.

       It is also left as an exercise to the reader to figure out why I undefine $give_id, above; and why I could achieved the same effect with
       any of:

	   $give_id = 'I like pie!';
	  # or...
	   $give_id = [];
	  # or even;
	   $give_id = sub { print "Mmmm pie!
" };

       But not:

	   $give_id = sub { print "I'm $give_id and I like pie!
" };
	  # nor...
	   $give_id = $give_id;
	  # nor...
	   $give_id = { 'pie' => $give_id, 'mode' => 'a la' };

   Doing Recursive Things Iteratively
       Note that you may at times see an iterative implementation of pre-order traversal, like so:

	  {
	    my @to_do = ($tree); # start-node
	    while(@to_do) {
	      my $this = shift @to_do;

	      # "Visit" the node:
	      $this->attr('id', $counter++)
	       unless defined $this->attr('id');

	      unshift @to_do, grep ref $_, $this->content_list;
	       # Put children on the stack -- they'll be visited next
	    }
	  }

       This can under certain circumstances be more efficient than just a normal recursive routine, but at the cost of being rather obscure.  It
       gains efficiency by avoiding the overhead of function-calling, but since there are several method dispatches however you do it (to "attr"
       and "content_list"), the overhead for a simple function call is insignificant.

   Pruning and Whatnot
       The "traverse" method does have the fairly neat features of the "ABORT", "PRUNE_UP" and "PRUNE_SOFTLY" signals.	None of these can be
       implemented totally straightforwardly with recursive routines, but it is quite possible.  "ABORT"-like behavior can be implemented either
       with using non-local returning with "eval"/"die":

	 my $died_on; # if you need to know where...
	 sub thing {
	   ... visits $_[0]...
	   ... maybe set $died_on to $_[0] and die "ABORT_TRAV" ...
	   ... else call thing($child) for each child...
	   ...any post-order visiting $_[0]...
	 }
	 eval { thing($node) };
	 if($@) {
	   if($@ =~ m<^ABORT_TRAV>) {
	     ...it died (aborted) on $died_on...
	   } else {
	     die $@; # some REAL error happened
	   }
	 }

       or you can just do it with flags:

	 my($abort_flag, $died_on);
	 sub thing {
	   ... visits $_[0]...
	   ... maybe set $abort_flag = 1; $died_on = $_[0]; return;
	   foreach my $c ($_[0]->content_list) {
	     thing($c);
	     return if $abort_flag;
	   }
	   ...any post-order visiting $_[0]...
	   return;
	 }

	 $abort_flag = $died_on = undef;
	 thing($node);
	 ...if defined $abort_flag, it died on $died_on

SEE ALSO

       HTML::Element

AUTHOR

       Current maintainers:

       o   Christopher J. Madsen "<perl AT cjmweb.net>"

       o   Jeff Fearn "<jfearn AT cpan.org>"

       Original HTML-Tree author:

       o   Gisle Aas

       Former maintainers:

       o   Sean M. Burke

       o   Andy Lester

       o   Pete Krawczyk "<petek AT cpan.org>"

       You can follow or contribute to HTML-Tree's development at http://github.com/madsen/HTML-Tree <http://github.com/madsen/HTML-Tree>.

COPYRIGHT

       Copyright 2000,2001 Sean M. Burke

perl v5.14.2							    2012-06-30					      HTML::Element::traverse(3pm)