11-28-2009
How to install linux in a system without cdrom, usb boot, floppy, other OS?
Hello to everyone,
I am new to linux and I want to move to this system after bad experiences with windows.
I have also a particular problem. An old laptop is probably able to handle just linux at this point of its life.
The cdrom is gone, the bios doesn't have usb boot support, there is no floppy or pxe network boot ability, so I was wondering what other way I can have to install linux on a barebone hd (nothing on it).
The only Idea I had was to copy some files on the hd via a ide cable adapter, connecting the laptop hd to the mobo of a desktop. I did the same in the past to install xp: I used msdos 7 to boot the machine and then launch the xp setup from withing the hd (copied before the installation files).
So my question is, can I do the same with linux? in such case, of course I will have a hd formatted with fat32 to boot in msdos, and what files should I copy on this partition to launch the installation?
If this is not the best path to follow and some guru here can advise me a better way I am looking for his helps. I look on the net but everywhere at least they require a previous operative system on it or some kind of boot support (usb, cdrom, floppy...)
Thanks again
7 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
We use
#eject cdrom
to eject the cdrom . Is there a way to "close" it after using that command ?
is there a command to eject floppy ?
Thanks (7 Replies)
Discussion started by: hitlermom
7 Replies
2. UNIX for Dummies Questions & Answers
Hi,
My dear friends,
I am trying to install red hat linux. I have downloaded its disc1. On the instructions page, the next stage is to make the boot disk, so that I can boot from the floppy. However, I am unable to locate the boot image iso file. I tried on google, but I got a few files which... (3 Replies)
Discussion started by: linuxpenguin
3 Replies
3. Solaris
Hi all,
I've this problem:
I want to install Solaris 10 on Sun Enterprise 450 but when I type "boot cdrom - install" command from OK PROMPT I read this message.
"Can't open input device". I attempt to change "cdrom" with its "alias", after to have typing "devalias" command, but nothing!
... (6 Replies)
Discussion started by: Sunb3
6 Replies
4. Linux
can any body tell simple steps to install linux from pen drive (4gb) fat32 ( with out dvd rom ) (3 Replies)
Discussion started by: seshumohan
3 Replies
5. UNIX for Dummies Questions & Answers
Hi everybody,
I have several computers that are configured to install when I plug them on the network. The hard drive come's empty, but I think they have a parameter in the BIOS that allow the machines to install from the network.
My problem is that in most cases, available bw is weak and... (5 Replies)
Discussion started by: chebarbudo
5 Replies
6. Solaris
Hi community,
Does anyone can tell me the difference between "boot cdrom" and "boot cdrom - install" ?
Thank you very much:D (3 Replies)
Discussion started by: Sunb3
3 Replies
7. Red Hat
Hi,
I have 2 question.
1)how can I install the redhat linux 5 into USB disk and boot from USB disk forever.
2) how can I backup an existing redhat linux from hd to USB by disk image and make the USB bootable afterward ,
so I can use usb disk to boot the linux in another machine ....
Please... (0 Replies)
Discussion started by: chuikingman
0 Replies
LEARN ABOUT MOJAVE
installgrub
installgrub(1M) installgrub(1M)
NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)