Hi, there are tons of RAID1 tutorials, but none of them deal with lvm. The problem is that I want to expand my current lvm partition over RAID1 rather than creating a new lvm partition after RAID1 is created.
My master harddrive has lvm partition. I'm wondering how to create a RAID1 image of... (1 Reply)
Hi All,
How do I create /var as LVM type during install? I want my new OS to have /var as LVM so that I could extend it on the fly.
Thanks for any comment you may add. (2 Replies)
i have os 5.1 and i do mirror with hdisk0 and hdisk1 on rootvg
at the end i get error in mail that:
At least one partition mirror is broken please call sysadmin
hd5 boot 1 2 2 closed/stale N/A
the other fs seems ok and sync
what to do about the hd5??? (4 Replies)
I wanted to know how we can combine volumes over 2 physical drives.
# fdisk -l
Disk /dev/sda: 42.9 GB, 42949672960 bytes
255 heads, 63 sectors/track, 5221 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/sda1 ... (16 Replies)
Hello,
I have install 2 HDD in my server and now installing the Centos6.4.
I want create the LVM of those 2 HDD's so while i'm doing this it is not allowing me to select these 2 disk's from allowable disk list.
Same problem if i tried to make Software RAID with creating LVM.
Please help. (1 Reply)
Hello All,
I have a Red Hat Linux 5.9 Server installed with one hard disk & 2 Partitions created on it as follows,
/boot - Linux Partition & another is
LVM - One VG & under that 5-6 Logical volumes(var,opt,home etc).
Here my requirement is to take out 1GB of space from LVM ( Any logical... (5 Replies)
Oracle Linux 6.6
To create Physical Volumes for Volume groups (LVM) , the disk need to be partitioned to LVM type ie. 'Linux LVM' type . In fdisk , this can done by choosing 8e when prompted for partition type.
Since it is easy to script (non-interactive), I use parted command rather than... (1 Reply)
Hi All,
I have one logical volume with size as 900G and it is mounted as xfs file system.
Now I want to reduce this partition to 500G.
So I followed the below steps.
unmount the mount point /home
Reduced the volume using the command
Now I remounted the partition.
But the problem... (3 Replies)
Discussion started by: kalpeer
3 Replies
LEARN ABOUT DEBIAN
jfs_fscklog
jfs_fscklog(8) Extract/Display JFS fsck Log jfs_fscklog(8)NAME
jfs_fscklog - extract a JFS fsck service log into a file and/or format and display the extracted file
SYNOPSIS
jfs_fscklog [ -d ] [ -e device ] [ -f output.file ] [ -p ] [ -V ]
DESCRIPTION
jfs_fscklog with option -e device extracts the contents of either the most recent or immediately prior (specified with option -p) JFS fsck
service log from the specified device, and writes the output to a file. The file name may be specified with the -f option, or the default
file name is <pwd>fscklog.new. If the -p option is used, the default file name is <pwd>fscklog.old.
jfs_fscklog with option -d formats and displays the contents of the extracted file.
jfs_fscklog with options -d and -e device extracts and displays the JFS fsck service log.
OPTIONS -d Format and display a previously extracted JFS fsck service log.
-e device
Extract the JFS fsck service log from device and store it in a file. (device is the special file name corresponding to the actual
device from which the fsck log will be extracted (e.g. /dev/hdb1 )).
-f file.name
Specify the file name, overriding the default file name. When used with -e device, file.name specifies the name of the file into
which the JFS fsck log will be extracted. When used with -d, file.name specifies the name of the extracted file whose contents will
be formatted and displayed.
file.name must be 127 characters or less in length.
file.name will be created in the present working directory unless it is fully qualified.
-p Extract the prior log (as opposed to the most recent log).
-V Print version information and exit (regardless of any other chosen options).
EXAMPLES
Extract the most recent JFS fsck log on /dev/hda5 into <pwd>fscklog.new:
jfs_fscklog -e /dev/hda5
Extract the most recent JFS fsck log on /dev/hdb3 into /temp/l9651107.log:
jfs_fscklog -e /dev/hdb3 -f /temp/l9651107.log
Display the JFS fsck log that was extracted into /temp/l9651107.log:
jfs_fscklog -d -f /temp/l9651107.log
Extract and display the previous JFS fsck log from /dev/hda8:
jfs_fscklog -e /dev/hda8 -d -p
REPORTING BUGS
If you find a bug in JFS or jfs_fscklog, please report it via the bug tracking system ("Report Bugs" section) of the JFS project web site:
http://jfs.sourceforge.net/
Please send as much pertinent information as possible, including any jfs_fscklog error messages and the complete output of running jfs_fsck
with the -v option on the JFS device.
SEE ALSO jfs_fsck(8), jfs_mkfs(8), jfs_tune(8), jfs_logdump(8), jfs_debugfs(8)AUTHOR
Barry Arndt (barndt@us.ibm.com)
jfs_fscklog is maintained by IBM.
See the JFS project web site for more details:
http://jfs.sourceforge.net/
October 28, 2002 jfs_fscklog(8)