temhem, you will not be able to run the command "sh" on sftp, from what I know.
if you want to execute commands on serverB and have the output on serverA you can do for example:
Code:
ssh user@serverB "ls -ls"
more efficient I think is that you can make all this on serverB, write a script that will do all this and run a CRON Job to send the files from serverB to serverA
On ServerB:
You can setup CRON JOB by issuing the command:
Code:
# crontab -e
* 12 * * * /home/user/myscript.sh
this will run every 12th hour everyday
name this myscript.sh (as on the cronjob, but you can change it)
don't forget to add executable permission on this file
Code:
#!/bin/bash
#run the topl
/home/oper/topl.sh
#send variable files to serverA
scp /home/oper/odeme user@serverA:/home/user/
scp /home/oper/taksit user@serverA:/home/user/
# log the date/time that files were copied
echo "Variable files copied on $(date)" >> /home/oper/variablescopy.log
I want to pass a variable set in my c program to a shell script (which will also be invoked or initiated from the same C program using the C's system command). Is it possible ?
:confused: (3 Replies)
Hi,
If a script A(Parent) is running and script B(child) is run from script A, will the variables in script A be past to script B?
Will the variables exist only for the duration of running the script?
Thank you (2 Replies)
I need a non-perl (bash) way to strip the path from a list of "find" results. Below is the perl version which I could use, if I could figure out how to call the script with a variable (like in sh, $1 is the variable passed in ./script variable)
$file = "/path/to/file.txt";
# How do I... (2 Replies)
I would like to know how to pass a variable inside a variable to a function.
sample code below
--------------
for x in 1 9
do
check_null $C$x ##call function to check if the value is null
if
then
echo "line number:$var_cnt,... (2 Replies)
Any help would be great. I know this is a dumb way of doing this, but I would like to know if there is a solution doing it this way. I'm very new at this and I'd like to learn more. Thanks! :D:D
count=0
while ; do
echo "enter your name"
read name_$count
let count=count+1
done
... (2 Replies)
Dear All,
I want to print a file.
First I tried with this
sed '2q;d' filename
it worked. But when i put following it is not working
x=2;
sed '$xq;d' filename
Would any one suggest how to pass the variable? (7 Replies)
Hi Folks,
I would like to pass a variable with a wild card in an argument. My script works if I don't use a wildcard but fails when I use *. I want to use the script like:
scriptname -F <filename*>
@ i = 0
while ($i <= ${#argv})
switch ($argv)
case -F:
set j = `echo $i +1... (2 Replies)
I have a small program which needs to pass variable dynamically to form the name of a second variable whose value wil be passed on to a third variable.
***************** Program Start ******************
LOC1=/loc1
PAT1IN=/loc2
PAT2IN=/loc3
if ; then
for fpattern in `cat... (5 Replies)
Hi,
I want to pass value of a variable track_line which is the line number to sed. Sed should print the lines starting from track_line till the last
line of the file. I tried the below command but it is not working.
sed -n '${track_line},$p' latest_log_file
I tried using the below too but... (1 Reply)
I have a below syntax its working fine...
var12=$(ps -ef | grep apache | awk '{print $2,$4}')
Im getting expected output as below:
printf "%b\n" "${VAR12}"
dell 123
dell 456
dell 457
Now I wrote a while loop.. the output of VAR12 should be passed as input parameters to while loop and results... (5 Replies)
Discussion started by: sam@sam
5 Replies
LEARN ABOUT SUSE
irsend
IRSEND(1) FSF IRSEND(1)NAME
irsend - basic LIRC program to send infra-red commands
SYNOPSIS
irsend [options] DIRECTIVE REMOTE CODE [CODE...]
DESCRIPTION
Asks the lircd daemon to send one or more CIR (Consumer Infra-Red) commands. This is intended for remote control of electronic devices such
as TV boxes, HiFi sets, etc.
DIRECTIVE can be:
SEND_ONCE - send CODE [CODE ...] once
SEND_START - start repeating CODE
SEND_STOP - stop repeating CODE
LIST - list configured remote items
SET_TRANSMITTERS - set transmitters NUM [NUM ...]
SIMULATE - simulate IR event
REMOTE is the name of a remote, as described in the lircd configuration file.
CODE is the name of a remote control key of REMOTE, as it appears in the lircd configuration file.
NUM is the transmitter number of the hardware device.
For the LIST DIRECTIVE, REMOTE and/or CODE can be empty:
LIST "" "" - list all configured remote names
LIST REMOTE "" - list all codes of REMOTE
LIST REMOTE CODE - list only CODE of REMOTE
The SIMULATE command only works if it has been explicitly enabled in lircd.
-h --help
display usage summary
-v --version
display version
-d --device
use given lircd socket [/var/run/lirc/lircd]
-a --address=host[:port]
connect to lircd at this address
-# --count=n
send command n times
EXAMPLES
irsend LIST DenonTuner ""
irsend SEND_ONCE DenonTuner PROG-SCAN
irsend SEND_ONCE OnkyoAmpli VOL-UP VOL-UP VOL-UP VOL-UP
irsend SEND_START OnkyoAmpli VOL-DOWN ; sleep 3
irsend SEND_STOP OnkyoAmpli VOL-DOWN
irsend SET_TRANSMITTERS 1
irsend SET_TRANSMITTERS 1 3 4
irsend SIMULATE "0000000000000476 00 OK TECHNISAT_ST3004S"
FILES
/etc/lirc/lircd.conf
Default lircd configuration file. It should contain all the remotes, their infra-red codes and the corresponding timing and wave-
form details.
DIAGNOSTICS
If lircd is not running (or /var/run/lirc/lircd lacks write permissions) irsend aborts with the following diagnostics:
"irsend: could not connect to socket"
"irsend: Connection refused" (or "Permission denied").
SEE ALSO
The documentation for lirc is maintained as html pages. They are located under html/ in the documentation directory.
lircd(8), mode2(1), smode2(1), xmode2(1), irrecord(1), irw(1), http://www.lirc.org.
irsend 0.8.7pre1 May 2010 IRSEND(1)
11-11-2009
