If the security-mode is set to command then you can boot, you just cannot add any parameters to the boot command at the OBP level, so if the machine does boot off local OS (i.e. boot-device is set to disk) and you know the root password you can reset the prom password to a know one by doing:
You will then get prompted for a new prom password.
N.B. man monitor gives you the manpage about the OBP commands.
Hi.
I need to update firmware on a Js20 blade server I have and need to do it via Diagnostics CD, rather than using diag in AIX. So a little refresh on how to. Boot of the Diag CD, burn the firmware image to another CD-ROM and all set. Will I need to burn any additional files to the CD... (1 Reply)
This ran through my mind while writing a doc, may be dumb one.
I have seen people using the terms Microcode and Firmware in IBM system p world interchangeably.
Firmware update or microcode update
Is that right? Are they synonyms? (4 Replies)
So in the group of boxes I've inherited, I have one that has a firmware password. I do not know the root password of the machine nor the firmware password. I've tried several things already, such as: removing BIOS battery, double tap the power switch, and several variants of the STOP-A on a PC... (2 Replies)
Hello forums this is my first post here
im having an old adsl modem ZYXEL Prestige 660R
i want to changet he firmware.it is using openwrt.but i have an inclination that incase i change the firmware then i will be no longer be left with the default user menu of the modem but i will have to... (16 Replies)
Hi:
I bougth an used Sun Fire v440, and It have a firmware password. When I turn on the server, it ask for firmware password. (I don 't know what is the correct password). I can access to SC, but when I want to access to OBP, Firmware Password appears again. I remove the battery for two hours,... (1 Reply)
Hi Guys,
Anyone know where to get the firmware to upgrade the ilom from 3.0 to 3.2.1. Found reference to it on myoracle support, but then when you try to follow the links it's not there.
Any help is greatly appreciated.
Thanks
Martin (4 Replies)
Hi All,
On wanting to re-install AIX 6.1 on to an RS 6000 Power 9111 285 station, I've tried to get in to SMS and also to boot from the DVD drive, but now the Firmware is locked and asking for the password. I originally set the password about 6 years ago and have forgotten it because I've never... (14 Replies)
Hello, I am going to upgrade the Firmware on a T5 Sparc server running Solaris 11.2 and just wanted to clarify a couple of things please.
I have downloaded the Firmware patch P24441083_96, however this says it is based on ILOM 3.2.6. Ive been trying to find the download ilom 3.2.6 but each time... (2 Replies)
I was unable to login and so used the "Forgotten Password' process. I was sent a NEWLY-PROVIDED password and a link through which my password could be changed. The NEWLY-PROVIDED password allowed me to login.
Following the provided link I attempted to update my password to one of my own... (1 Reply)
Discussion started by: Rich Marton
1 Replies
LEARN ABOUT DEBIAN
vconsole.conf
VCONSOLE.CONF(5) vconsole.conf VCONSOLE.CONF(5)NAME
vconsole.conf - configuration file for the virtual console
SYNOPSIS
/etc/vconsole.conf
DESCRIPTION
The /etc/vconsole.conf file configures the virtual console, i.e. keyboard mapping and console font.
The basic file format of the vconsole.conf is a newline-separated list environment-like shell-compatible variable assignments. It is
possible to source the configuration from shell scripts, however, beyond mere variable assignments no shell features are supported,
allowing applications to read the file without implementing a shell compatible execution engine.
Note that the kernel command line options vconsole.keymap=, vconsole.keymap.toggle=, vconsole.font=, vconsole.font.map=,
vconsole.font.unimap= may be used to override the console settings at boot.
Depending on the operating system other configuration files might be checked for configuration of the virtual console as well, however only
as fallback.
OPTIONS
The following options are understood:
KEYMAP=, KEYMAP_TOGGLE=
Configures the key mapping table of for they keyboard. KEYMAP= defaults to us if not set. The KEYMAP_TOGGLE= can be used to configured
a second toggle keymap and is by default unset.
FONT=, FONT_MAP=, FONT_UNIMAP=
Configures the console font, the console map and the unicode font map. FONT= defaults to latarcyrheb-sun16.
EXAMPLE
Example 1. German keyboard and console
/etc/vconsole.conf:
KEYMAP=de-latin1
FONT=latarcyrheb-sun16
SEE ALSO systemd(1), loadkeys(1), setfont(8), locale.conf(5)AUTHOR
Lennart Poettering <lennart@poettering.net>
Developer
systemd 10/07/2013 VCONSOLE.CONF(5)