Sponsored Content
Operating Systems Solaris Jet/Jumpstart installation freezing Post 302369717 by masloff on Monday 9th of November 2009 10:32:20 AM
Old 11-09-2009
Thanks for reply. Client is V240 with 2gb of ram installed.

Issue is, that it just freezes after configuration of NIC.

Snooping for traffic revealed this

Code:
chiscvaptest05 -> 10.255.255.255 BPARAM C GETFILE root
  chiscadm03 -> chiscvaptest05 BPARAM R GETFILE File=/apps/jet/media/sol10u8_sparc/Solaris_10/Tools/Boot
chiscvaptest05 -> (broadcast)  ARP C Who is 10.20.11.110, chiscvaptest05 ?
chiscvaptest05 -> (broadcast)  ARP C Who is 10.20.11.110, chiscvaptest05 ?
chiscvaptest05 -> (broadcast)  ARP C Who is 10.20.11.110, chiscvaptest05 ?
chiscvaptest05 -> 10.255.255.255 BPARAM C GETFILE install
  chiscadm03 -> chiscvaptest05 BPARAM R GETFILE File=/apps/jet/media/sol10u8_sparc
chiscvaptest05 -> (broadcast)  ARP C Who is 10.20.11.110, chiscvaptest05 ?
chiscvaptest05 -> (broadcast)  ARP C Who is 10.20.11.110, chiscvaptest05 ?
chiscvaptest05 -> chiscadm03   ARP R 10.20.11.110, chiscvaptest05 is 0:14:4f:75:9:6c
  chiscadm03 -> chiscvaptest05 TCP D=518 S=2049 Fin Ack=3712627 Seq=3551292206 Len=0 Win=49232 Options=<nop,nop,tstamp 2026324539 90515>
chiscvaptest05 -> chiscadm03   ARP R 10.20.11.110, chiscvaptest05 is 0:14:4f:75:9:6c
  chiscadm03 -> chiscvaptest05 TCP D=518 S=2049 Fin Ack=3712627 Seq=3551292206 Len=0 Win=49232 Options=<nop,nop,tstamp 2026324579 90515>
  chiscadm03 -> chiscvaptest05 TCP D=518 S=2049 Fin Ack=3712627 Seq=3551292206 Len=0 Win=49232 Options=<nop,nop,tstamp 2026324659 90515>
  chiscadm03 -> chiscvaptest05 TCP D=518 S=2049 Fin Ack=3712627 Seq=3551292206 Len=0 Win=49232 Options=<nop,nop,tstamp 2026324820 90515>

And this is the end, nothing else..packets keep appear in snoop output - but once in min or smth...
 

8 More Discussions You Might Find Interesting

1. Solaris

Jumpstart installation problem.

We are installing Solaris 9 with Jumpstart ...facing problems.. Problem is .it is prompting for questions, even though we set the Sysidcfg and class files properly. when we give "boot net - install" at OK prompt, it is coming till "The system is coming up. Please wait" After that it... (5 Replies)
Discussion started by: b_manu78
5 Replies

2. Solaris

Solaris 10 installation over WAN using jumpstart

I am trying to install Solaris 10 OS using jumpstart over WAN. I have configured the jumpstart server with apache server and created all the necessary configurations and files. When i WAN boot my target machine, it gets booted using wanboot, it downloads the miniroot from the jumpstart server, but... (3 Replies)
Discussion started by: hemalsid
3 Replies

3. Solaris

Flash installation with Jumpstart

I get following error while doing a flash installation. I 'm trying to deploy a flash archive created by our engineering team. I 'm trying to install it with ZFS root and the profile which i using is as following #more flash_profile_test install_type flash_install archive_location nfs... (3 Replies)
Discussion started by: fugitive
3 Replies

4. Solaris

jumpstart installation

hi friends, i dont know how to install jumpstart . i have solaris cds( 5 nos.). i tried to install jumpstart but there is no setup_install_server file. What i want to do for installing jumpstart server please help me thanks to all (8 Replies)
Discussion started by: sijocg
8 Replies

5. Solaris

Jumpstart Installation from X86 machine

Hi friends , i have on ultra 10 Sparc machine . Due to some problem my OS is fully corrupted , so i am planning to install again but my problem is the cd drive in Ultra 10 machine is not working. Now i am planning to use Jumpstart installation method to install my server. But i... (4 Replies)
Discussion started by: vr_mari
4 Replies

6. Solaris

Could not start installation using jumpstart

hello I created a boot server and tryed to run intstall with jumpstart on other solaris server, but jumpstart coudn't starts, only text-based install. sysidcfg and rules file are in the same shared folder, rules file has only one string any - - any_profile - and thta't all. also I created... (2 Replies)
Discussion started by: sluge
2 Replies

7. Solaris

help me! jumpstart installation error

Hi actualy my two machines are sun sparc ultra 60. Both are same configuration. I am trying jumpstart Installation in my two machines, i got no errors in server side but in the client side actually it detects the server machine with correct hostname and domainname but after showed that it will... (2 Replies)
Discussion started by: Grovestreet
2 Replies

8. Solaris

Problem in configuring jumpstart installation

I am trying to configuring jumpstart configuration. Please find below sysidcfg configuration file output bash-3.2# cat sysidcfg terminal=vt100 network_interface=nxge0 { primary hostname=sun1 ip_address=192.168.11.10 \ protocol_ipv6=no netmask=255.255.255.0 default_route=192.168.11.7}... (5 Replies)
Discussion started by: sb200
5 Replies
WAKEONLAN(1)						User Contributed Perl Documentation					      WAKEONLAN(1)

NAME
wakeonlan - Perl script to wake up computers SYNOPSIS
wakeonlan [-h] [-v] [-i IP_address] [-p port] [-f file] [[hardware_address] ...] DESCRIPTION
This script sends 'magic packets' to wake-on-lan enabled ethernet adapters and motherboards, in order to switch on the called PC. Be sure to connect the NIC with the motherboard if neccesary, and enable the WOL function in the BIOS. The 'magic packet' consists of 6 times 0xFF followed by 16 times the hardware address of the NIC. This sequence can be encapsulated in any kind of packet. This script uses UDP packets. OPTIONS
-h Displays the help information. -v Displays the script version. -i ip_address Destination IP address. Unless you have static ARP tables you should use some kind of broadcast address (the broadcast address of the network where the computer resides or the limited broadcast address). Default: 255.255.255.255 (the limited broadcast address). -p port Destination port. Default: 9 (the discard port). -f file File with hardware addresses of wakeable computers. For an example check the file lab001.wol in the examples subdirectory. EXAMPLES
Using the limited broadcast address (255.255.255.255): $ wakeonlan 01:02:03:04:05:06 $ wakeonlan 01:02:03:04:05:06 01:02:03:04:05:07 Using a subnet broadcast address: $ wakeonlan -i 192.168.1.255 01:02:03:04:05:06 Using another destination port: $ wakeonlan -i 192.168.1.255 -p 1234 01:02:03:04:05:06 Using a file as source of hardware and IP addresses: $ wakeonlan -f examples/lab001.wol $ wakeonlan -f examples/lab001.wol 01:02:03:04:05:06 AUTHOR
Jose Pedro Oliveira <jpo@di.uminho.pt> maintaining and expanding original work done by Ico Doornekamp <ico@edd.dhs.org>. COPYRIGHT
Copyright (c) 2000-2005 Jose Pedro Oliveira. This is free software. You may modify it and distribute it under Perl's Artistic Licence. Modified versions must be clearly indicated. SEE ALSO
For more information regarding this script and Wakeonlan technology just check the following address http://gsd.di.uminho.pt/jpo/software/wakeonlan/. perl v5.14.2 2012-03-10 WAKEONLAN(1)
All times are GMT -4. The time now is 09:10 AM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy