hi. Im trying to install a switch.
And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection.
However.. nothing about how to find this info.
Could anyone help me where to find this path?
thx
mr.T (6 Replies)
I have installed aix 5.2 on aix box through serial console connected to COM 1 . I even get a login prompt after the fresh installation . But as soon as i give a root & enter i again get a login prompt.i..e I am not able to logon after a fresh installation.
and even i configured IP configuration... (0 Replies)
I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac.
After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So... (1 Reply)
Hey!
I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk.
If i run cat /proc/bus/usb/devices
I get this information:
T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00... (2 Replies)
Hi community,
I've currently working on SUN Server V490 and I'm connecting with a Serial port (I DON'T HAVE ANY IP CONNECTIVITY)...I need to redirect the graphic interface of Oracle with the dbca command; I know a way with an IP Connectivity ( use a X-Server and then setenv DISPLAY... (7 Replies)
I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data.
It get only some data. What should I do to get altogether of data?
If all of... (7 Replies)
Hello all.
I have an old computer with M$-DOS 7. I want to use it like a dumb terminal, with telnet. I need to connect it to my desktop These are my questions:
How can i configure the serial port on dos?
How can i telnet form dos to the serial port?
How can i set up a telnet server on the... (12 Replies)
I am trying to change one of my serial printers from /dev/ttyr002 to /dev/ttyr014:
lpstat -s
device for check3: /dev/ttyr002
device for check4: /dev/ttyr002
I changed the tty setting for check3 in:
/etc/printcap
/var/spool/lp/admins/lp/printers/check3
to /dev/ttyr014
Then I get:... (4 Replies)
I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example:
echo "gpio set 7" > /dev/ttyACM0
...followed... (12 Replies)
Discussion started by: Chalk-X
12 Replies
LEARN ABOUT DEBIAN
mfontset_lookup
mfontset_lookup(3m17n) The m17n Library mfontset_lookup(3m17n)NAME
mfontset_lookup - Lookup a fontset.
SYNOPSIS
MPlist * mfontset_lookup (MFontset * fontset, MSymbol script, MSymbol language, MSymbol charset)
DESCRIPTION
Lookup a fontset. The mfontset_lookup() function lookups fontset and returns a plist that describes the contents of fontset corresponding
to the specified script, language, and charset.
If script is Mt, keys of the returned plist are script name symbols for which some fonts are specified and values are NULL.
If script is a script name symbol, the returned plist is decided by language.
o If language is Mt, keys of the plist are language name symbols for which some fonts are specified and values are NULL. A key may be Mt
which means some fallback fonts are specified for the script.
o If language is a language name symbol, the plist is a FONT-GROUP for the specified script and language. FONT-GROUP is a plist whose keys
are FLT (FontLayoutTable) name symbols (Mt if no FLT is associated with the font) and values are pointers to MFont.
o If language is Mnil, the plist is fallback FONT-GROUP for the script.
If script is Mnil, the returned plist is decided as below.
o If charset is Mt, keys of the returned plist are charset name symbols for which some fonts are specified and values are NULL.
o If charset is a charset name symbol, the plist is a FONT-GROUP for the charset.
o If charset is Mnil, the plist is a fallback FONT-GROUP.
RETURN VALUE
It returns a plist describing the contents of a fontset. The plist should be freed by m17n_object_unref().
COPYRIGHT
Copyright (C) 2001 Information-technology Promotion Agency (IPA)
Copyright (C) 2001-2011 National Institute of Advanced Industrial Science and Technology (AIST)
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License
<http://www.gnu.org/licenses/fdl.html>.
Version 1.6.2 12 Jan 2011 mfontset_lookup(3m17n)