hi. Im trying to install a switch.
And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection.
However.. nothing about how to find this info.
Could anyone help me where to find this path?
thx
mr.T (6 Replies)
I have installed aix 5.2 on aix box through serial console connected to COM 1 . I even get a login prompt after the fresh installation . But as soon as i give a root & enter i again get a login prompt.i..e I am not able to logon after a fresh installation.
and even i configured IP configuration... (0 Replies)
I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac.
After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So... (1 Reply)
Hey!
I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk.
If i run cat /proc/bus/usb/devices
I get this information:
T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00... (2 Replies)
Hi community,
I've currently working on SUN Server V490 and I'm connecting with a Serial port (I DON'T HAVE ANY IP CONNECTIVITY)...I need to redirect the graphic interface of Oracle with the dbca command; I know a way with an IP Connectivity ( use a X-Server and then setenv DISPLAY... (7 Replies)
I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data.
It get only some data. What should I do to get altogether of data?
If all of... (7 Replies)
Hello all.
I have an old computer with M$-DOS 7. I want to use it like a dumb terminal, with telnet. I need to connect it to my desktop These are my questions:
How can i configure the serial port on dos?
How can i telnet form dos to the serial port?
How can i set up a telnet server on the... (12 Replies)
I am trying to change one of my serial printers from /dev/ttyr002 to /dev/ttyr014:
lpstat -s
device for check3: /dev/ttyr002
device for check4: /dev/ttyr002
I changed the tty setting for check3 in:
/etc/printcap
/var/spool/lp/admins/lp/printers/check3
to /dev/ttyr014
Then I get:... (4 Replies)
I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example:
echo "gpio set 7" > /dev/ttyACM0
...followed... (12 Replies)
Discussion started by: Chalk-X
12 Replies
LEARN ABOUT DEBIAN
mdbfontencoding
mdbFontEncoding(5) The m17n Library mdbFontEncoding(5)NAME
mdbFontEncoding - Font Encoding
DESCRIPTION
The m17n library loads information about the encoding of each font form the m17n database by the tags <font, encoding>. The data is loaded
as a plist of this format.
FONT-ENCODING ::= PER-FONT *
PER-FONT ::= '(' FONT-SPEC ENCODING [ REPERTORY ] ')'
FONT-SPEC ::=
'(' [ FOUNDRY FAMILY
[ WEIGHT [ STYLE [ STRETCH [ ADSTYLE ]]]]]
REGISTRY ')'
ENCODING ::= SYMBOL
FONT-SPEC is to specify properties of a font. FOUNDRY to REGISTRY are symbols corresponding to Mfoundry to Mregistry property of a font.
See m17nFont for the meaning of each property.
For instance, this FONT-SPEC:
(nil alice0 lao iso8859-1)
should be applied to all fonts whose family name is 'alice0 lao', and registry is 'iso8859-1'.
ENCODING is a symbol representing a charset. A font matching FONT-SPEC supports all characters of the charset, and a character code is
mapped to the corresponding glyph code of the font by this charset.
REPERTORY is a symbol representing a charset or 'nil'. Omitting it is the same as specifying ENCODING as REPERTORY. If it is not 'nil', the
charset specifies the repertory of the font, i.e, which character it supports. Otherwise, whether a specific character is supported by the
font or not is asked to each font driver.
For so called Unicode fonts (registry is 'iso10646-1'), it is recommended to specify 'nil' as REPERTORY because such fonts usually supports
only a subset of Unicode characters.
COPYRIGHT
Copyright (C) 2001 Information-technology Promotion Agency (IPA)
Copyright (C) 2001-2011 National Institute of Advanced Industrial Science and Technology (AIST)
Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License
<http://www.gnu.org/licenses/fdl.html>.
Version 1.6.2 12 Jan 2011 mdbFontEncoding(5)