10-29-2009
ILOM on X4450
I bought a new Netra X4450 and this is my first time experience with intel based Sun server. I powered on the machine and went through the Sun wizard to complete OS configuration. Now I am on the root prompt and trying to get to the ILOM. On Sparc based servers I used to be able to go to the ILOM by pressing #. on console. I tried the same on this server but it does do the same.
Also, noticed there is no ok prompt!!! Initially, I was trying to boot from disk into single user mode in order to enable HW mirroring. I am reading the server dosumentation but that could not help me much. Those might be stupid questions but any guidance to over come this struggling start is appreciated...
10 More Discussions You Might Find Interesting
1. Solaris
I 've 2 different T5220 and both are showing different prompts when i ssh to the console.
1. Shows sc> ALOM
2. Shows -> ILOM
as far as i know the T5220 comes with ILOM , so why i 'm seeing 2 different type of console for same tyep of hardware ?
and i found that we... (6 Replies)
Discussion started by: fugitive
6 Replies
2. Solaris
I burned a Sun Solaris 10 x86 image on disk and trying to install it on Netra X4450. I verified in the BIOS that boot start with DVD first then a disk. However, when booting from disk I am getting the following error:
kernel$ /boot/multiboot kernel/$ISADIR/unix -B install_media=cdrom... (4 Replies)
Discussion started by: StarSol
4 Replies
3. Solaris
Hello
I have a server Sun Fire X4250. Few days ago I take a look to ILOM -> System Monitoring -> log events.
I saw some lines that I don't understand, for example:
5800 Chassis Action major Oct 30 23:58:35 2009 Hot insertion of /SYS/DBP/HDD12
5799 Chassis ... (3 Replies)
Discussion started by: marimontes
3 Replies
4. Solaris
I need to configure the iLOM for x4600 server. before I can set the IP details and commit, I need to set network state should be enabled. However my firmware is already the latest and I need not upgrade. I am not able to set the /SP/network state to enable. pls assist. i BELIEVE the bug was fixed... (5 Replies)
Discussion started by: incredible
5 Replies
5. Solaris
Hello,
In my server Sun Enterprise T5140 I have unusual problem with ILOM.
After several, several days, I can not connect to the ILOM.
For connection to the ILOM I turn off the server power and then turn it on.
Where is the problem?
Regards (10 Replies)
Discussion started by: bieszczaders
10 Replies
6. Solaris
I have setup my T5220 ILOM .. and its working fine. But if my network connection is broken to the ILOM i 'm unable to login to the ILOM for few hrs .. it gives me either wrong user/passwd error and after few hrs the same user/passwd works .. what could be the reason for this and how can i resove... (3 Replies)
Discussion started by: fugitive
3 Replies
7. Solaris
Hi,
I am just confused with iLOM. Is iLOM is applicable for SPARC as well as X86 servers?? which are having CMM. Hope ALOM will be applicable for rest of the servers like v240 kind of series.
Can any one pls clarify this??
Thanks in Advance
Vaisakh K S (3 Replies)
Discussion started by: vks47
3 Replies
8. Hardware
Hello,
I have an x86 server with an ILOM connection that produces strange characters when I perform a start /SP/console, see below:
Oracle(R) Integrated Lights Out Manager
Version 3.0.16.10.a r68533
Copyright (c) 2011, Oracle and/or its affiliates. All rights reserved.
-> start... (9 Replies)
Discussion started by: kerrygold
9 Replies
9. Solaris
Hi Guys,
Anyone know where to get the firmware to upgrade the ilom from 3.0 to 3.2.1. Found reference to it on myoracle support, but then when you try to follow the links it's not there.
Any help is greatly appreciated.
Thanks
Martin (4 Replies)
Discussion started by: callmebob
4 Replies
10. Solaris
Dear all
would you tell me the command in ILOM to :
- Check for error logged in ILOM ouput
- Check for system uptime (DAYS)
- Check for system reboot logged (Last system reboot)
Thank you (1 Reply)
Discussion started by: gema.utama
1 Replies
LEARN ABOUT OSF1
install-solaris
install-solaris(1M) install-solaris(1M)
NAME
install-solaris - install the Solaris operating system
SYNOPSIS
install-solaris
install-solaris invokes the Solaris Install program. Depending on graphical capability and available memory at the time of invocation,
install-solaris invokes either a text-based installer or a graphical installer.
The following minimum requirements for physical memory dictate which features are available during installation:
For SPARC machines:
128 MB
Minimum physical memory for all installation types
128 MB
Minimum physical memory required for windowing system
384 MB
Minimum physical memory required for graphical-based installation
For x86 machines:
256 MB
Minimum physical memory for all installation types
256 MB
Minimum physical memory required for windowing system
512 MB
Minimum physical memory required for graphical-based installation
In some cases, even if the minimum physical memory is present, available virtual memory after system startup can limit the number of fea-
tures available.
install-solaris exists only on the Solaris installation media (CD or DVD) and should be invoked only from there. Refer to the for more
details.
install-solaris allows installation of the operating system onto any standalone system. install-solaris loads the software available on the
installation media. Refer to the for disk space requirements.
Refer to the for more information on the various menus and selections.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcdrom (Solaris instal- |
| |lation media) |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
pkginfo(1), install(1M), pkgadd(1M), attributes(5)
It is advisable to exit install-solaris by means of the exit options in the install-solaris menus.
23 Sep 2005 install-solaris(1M)