About a week ago a customer hooked up a wireless router backwards to our network, causing it to serve incorrect DHCP addresses to some of them. Our networks are mostly statically assigned so this didn't cause as much damage as it might have, but now, over a week later, I still have incomplete 192.168.10.x entries stuck in the ARP table:
arp -d cannot delete the incomplete entries, and they won't go away. I suppose they're harmless but I'd get rid of them if I could. Is there any better way than a reboot?
Dear all,
We are testing two of our servers for mq series connectivity. The scenario is, when one machine is shutting down it's services there are some scripts that do a dns update, which removes the ip address and relates it to the ip address of the other node on our dns server, and the update... (7 Replies)
Does ARP Request packet Contains MAC Address of dest during broadcast?
I found It So...
When i captured ARP Req Pkts on ethereal...
Rgds
-Meti (1 Reply)
I was checking nettl output for a unstable telnet to my server. this is part of output:
###
***********************************STREAMS/UX*******************************@#%
Timestamp : Sun Jun 22 EETDST 2008 22:14:47.492899
Process ID : Subsystem ... (4 Replies)
On Solaris 8, when I do a lpstat -o:
I have tried cancel 140828p-16974, but the entries remain
New prints to this printer and others work successfully.
Can anyone suggest how to get rid of these entries.
Thanks (2 Replies)
Dear All
i have a linux proxy server which has RHEL-5 64 bit, it has two interfaces, it has the following details
eth0=10.200.14.42
eth3=10.201.14.42
default gateway=10.201.14.254
one static route=192.168.0.0/24 gw 10.200.14.254
i am facing a problem when i ping 10.201.14.42 from... (2 Replies)
Man page of netlink says:
---------------------------------
NETLINK_ARPD
For managing the arp table in user space.
----------------------------------
Is it possible to monitor arp table using Netlink? or it's just for manipulating? (1 Reply)
Can someone please explain this output to me. Why doesn't ifconfig show the same info?
~ $ arp -a
? (10.71.0.1) at 00:1b:21:2b:eb:0c on eth0 (4 Replies)
Hi, I'm trying to find a way to protect my network against arp spoofing.
What it is:
An attacker sends fake arp packets in the network, identifying himself as the router. All network traffic is then redirected to this attacker.
How to protect myself:
In my opinion, the best possible... (2 Replies)
Hello,
I have 2 clients with Unix installed.
host1: eth0 (192.168.5.10) & eth1 (192.168.10.10)
host2: eth0 (192.168.10.20)
I've connected host1-eth1 to host2-eth0. host1-eth0 isn't connected.
I started 'tcpdump' on wonder that host2 got ARP requests for 192.168.5.10.
Any idea why host1... (2 Replies)
A customer appears to have drastically misunderstood our instructions for connecting to our WAN. He set his PC IP address to the same as one of the bridges. :mad: :wall: This caused much confusion on the network, to put it mildly. He called to complain about the poor performance of the network... (13 Replies)
Discussion started by: Corona688
13 Replies
LEARN ABOUT SUNOS
wireless
WIRELESS(7) Linux Programmer's Manual WIRELESS(7)NAME
wireless - Wireless Tools and Wireless Extensions
SYNOPSIS
iwconfig
iwpriv -a
DESCRIPTION
The Wireless Extensions is an API allowing you manipulate Wireless LAN networking interfaces. It is composed of a variety of tools and
configuration files. It is documented in more detail in the Linux Wireless LAN Howto.
The Wireless Tools are used to change the configuration of wireless LAN networking interfaces on the fly, to get their current configura-
tion, to get statistics and diagnose them. They are described in their own man page, see below for references.
Wireless configuration is specific to each Linux distribution. This man page will contain in the future the configuration procedure for a
few common distributions. For the time being, check the file DISTRIBUTIONS.txt included with the Wireless Tools package.
DEBIAN 3.0
In Debian 3.0 (and later) you can configure wireless LAN networking devices using the network configuration tool ifupdown(8).
File : /etc/network/interfaces
Form : wireless-<function> <value>
wireless-essid Home
wireless-mode Ad-Hoc
See also :
/etc/network/if-pre-up.d/wireless-tools
/usr/share/doc/wireless-tools/README.Debian
SuSE 8.0
SuSE 8.0 (and later) has integrated wireless configuration in their network scripts.
Tool : Yast2
File : /etc/sysconfig/network/wireless
/etc/sysconfig/network/ifcfg-*
Form : WIRELESS_<function>=<value>
WIRELESS_ESSID="Home"
WIRELESS_MODE=Ad-Hoc
See also :
man ifup
info scpm
ORIGINAL PCMCIA SCRIPTS
If you are using the original configuration scripts from the Pcmcia package, you can use this method.
File : /etc/pcmcia/wireless.opts
Form : *,*,*,*)
ESSID="Home"
MODE="Ad-Hoc"
;;
See also :
/etc/pcmcia/wireless
File PCMCIA.txt part of Wireless Tools package
AUTHOR
Jean Tourrilhes - jt@hpl.hp.com
http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/
SEE ALSO iwconfig(8), iwlist(8), iwspy(8), iwpriv(8), iwevent(8).
wireless-tools 4 March 2004 WIRELESS(7)