How can I use scadm without a valid username/password and no access to the ALOM?
---------- Post updated at 09:27 AM ---------- Previous update was at 09:11 AM ----------
Pulled the hard drives and booted. Nothing came of it. Below is the result of me trying to enter a break (~#). scadm won't work at this level; I've tried.
I'm running a Ultra 60 and having problems booting from the cdrom. This is the error I get,
Boot device: /pci@1f,4000/scsi@3/disk@6,0:f File and args:
The file just loaded does not appear to be executable.
Any know what could be the problem here? I've even tried connecting a 2nd cdrom... (3 Replies)
my redhat 9 will not boot. We had a power failure and when the power came back, my redhat linux will not boot.
The machine come up to grub prompt.
I tried the following from grub prompt
root (hd0, then press tab key
partition num:0 filesystem type unknown, partition type 0x83... (7 Replies)
I'm running solaris 2.5.1. My main development server is DEAD, i can't even boot off the cdrom, it powers up, acts like it is starting the boot process but then says cannot find boot device. I've done the search here on this site and saw the other posts, but at the ok prompt it won't even let me... (3 Replies)
I want to install Solaris 9 on SUN ULTRA 10. The cdrom is attached to an ide controller. The server is currently running Solaris 2.6
I insert Solaris cd 1 of 2 and at the ok prompt I type boot cdrom i get the error below
Boot device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0:f file and args:... (11 Replies)
i am having a problem when trying to boot from cdrom. I received the below message
system is not bootable, boot command is disabledfound
how can i fix this.
also what is the key combination on ordinary keyboard for STOP+A. Is it ctrl+break? (2 Replies)
Hi all am trying to boot the system from cdrom in single user mode , however when i am giving command boot cdrom -s i am getting below error
Boot Device: /pci@1f,0/pci@1,1/ide@3/cdrom@2,0: f file and args:
Can't read disk label
Can't open disk label package
can,t open boot device
... (17 Replies)
iam traying to install o/s in spark machine it showing error
ok >boot cdrom
is showing error
short disk read
failed to read superblock
the file just loaded does not appear to excutable
how to solve this can u help me (6 Replies)
I have a server with a scsi raid controller (for hard drives) and a scsi controller (for tape drive and cd-rom). I am trying to boot from the cd-rom but can't. During boot up, bootable media is detected in the cd-rom but the system will not boot from it. BIOS for the raid controller installs but... (1 Reply)
Good Afternoon,
I'm trying to boot from cdrom so I:
bash-2.05# init 0
{1} ok boot cdrom -s and I get:
Rebooting with command: boot cdrom -s
Boot Device: /pci@1e,600000/ide@d/cdrom@2,0:f File and args: -s
Can't read disk label.
Can't open disk label package
Evaluating:
Can't open boot... (13 Replies)
Discussion started by: Stellaman1977
13 Replies
LEARN ABOUT DEBIAN
tpm_nvwrite
tpm_nvwrite(8)tpm_nvwrite(8)NAME
tpm_nvwrite
SYNOPSIS
tpm_nvwrite [OPTIONS]
DESCRIPTION
tpm_nvwrite writes data to an NVRAM area. The user must provide the index of the NVRAM area as well as the data to write into the NVRAM
area. Optionally an offset into the NVRAM area can be given where the writing of the data is to start. Similarly the use may provide the
number of bytes to write into the NVRAM area. Some NVRAM areas only allow write sizes of zero, i.e., NVRAM area index 0. If the NVRAM area
has permission bits set that require owner or NVRAM area authentication, then the password must be provided via the password option.
The following options are supported:
-h, --help
Display command usage info.
-v, --version
Display command version info.
-l, --log [none|error|info|debug]
Set logging level.
-u, --unicode
Use TSS UNICODE encoding for passwords to comply with applications using TSS popup boxes
-z, --well-known
Use a secret of all zeros (20 bytes of zeros) as either the NVRAM area or owner secret.
-p, --password
Depending on what type of authentication is required for the NVRAM area, this must either be the NVRAM area or owner password.
A password may be directly provided for example by using '--password=password' or -ppassword. If no password is provided then the
program will prompt the user for the password.
-i, --index (optional parameter)
The index of the NVRAM area. The parameter may either be a decimal number or a hexadecimal number starting with '0x'.
-s, --size
The number of bytes to write to the NVRAM area. This parameter may be used to truncating the data that are for example read from a
file. The parameter may either be a decimal number or a hexadecimal number starting with '0x'.
-n, --offset (optional parameter)
The offset into the NVRAM area where to start writing. The parameter may either be a decimal number or a hexadecimal number starting
with '0x'.
-f, --filename (optional parameter)
The name of a file from which to read data and copy them into the NVRAM area.
-d, --data (optional parameter)
The data to write into the NVRAM area passed in the command line.
-m, --fill-value (optional parameter)
The byte to fill the NVRAM area with.
SEE ALSO tpm_nvdefine(8), tpm_nvinfo(8), tpm_nvread(8), tpm_nvrelease(8)REPORTING BUGS
Report bugs to <trousers-users@lists.sourceforge.net>
TPM Management 2011-07-11 tpm_nvwrite(8)