We need to specify only ipnat rules in ipnat.conf.
ipnat.conf
Code:
rdr bge1 75.126.76.41/8 port 30118 -> 10.2.45.197 port 30118 udp
rdr bge1 75.126.76.41/8 port 30119 -> 10.2.45.197 port 30119 udp
rdr bge1 75.126.76.41/8 port 30120 -> 10.2.45.197 port 30120 udp
rdr bge1 75.126.76.41/8 port 30121 -> 10.2.45.197 port 30121 udp
I've been googling for a while now, trying to forward port 3000 to port 80....
In the past I used to DLink router to forward port 3000 to 80. I recently finished (well, is it ever done anyhow?) setting up my linux box and got it acting as a router.
I want to continue to run Apache on port 80... (1 Reply)
Hi,
I have to install an application that has a built in tftp server. Tftp comes in on port 69. As i am not installing this application as a root user i am running into trouble because only the root user can listen to ports < 1024. So changing the port i listen to to one greater than 1023 isn't... (1 Reply)
Hi friends
i have the following setup
machine1 two network adapters one connected to lan the other connected directly to machine2
machine2 is not connected to lan
i need to access machine2 directly from the LAN
how to force machine1 to forward all traffic received on a specific port the... (1 Reply)
Hi
I want to set up port forwarding from one network to another network. I already have this configured on the Linux box using iptables.
iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 1521 -j DNAT --to 10.218.146.230
iptables -A FORWARD -p tcp -i eth1 -d 10.218.146.230 -j ACCEPT
... (2 Replies)
Hi; I have the following issue:
I have a Solaris server running an old applications which connects to an http server in other server at certain port. The thing is that the http server has changed its ip and port and the addres in the app is hard coded and touching the app by now is out of the... (0 Replies)
Hi Linux/Unix Guru,
I am setting Linux Hopping Station to another different servers.
My current config to connect to another servers is using different port to connect.
e.g
ssh -D 1080 -p 22 username@server1.com
ssh -D 1081 -p 22 username@server2.com
Now what I would like to have... (3 Replies)
Hello,
I have a routeur linksys (192.168.1.1 ) a firewall (192.168.1.55 IN ----> 192.168.2.254 OUT) which using iptable
I want to acces to an equipment (lorex video camera serveur 192.168.2.44) which using an ddns service on the port 9000
So i don t know which redirection a will do on the... (2 Replies)
Hi experts,
We have windows machine ( A ) in one network & 2 Linux Servers ( B & C ) in another network. There is a firewall between these 2 networks and SSH (TCP/22) & HTTPS (TCP/443) are allowed from A to B only (but not to C). There is no personal firewall / iptables running on any machine.... (1 Reply)
Hello Gurus,
I have configured port forwarding at router.
But after configuration I am not able to connect the computer from outside/Over internet/Remote desktp from other computer.
Could you please advice?
Thanks-
Pokhraj (2 Replies)
Hello All,
I would like to ask you very kindly with /etc/sysconfig/iptables file
I have to setup port forwarding on RHEL6 router. Users from public network must be able to ssh to servers in private network behind RHEL6 router. Problem is that servers in private network must be isolated.
My... (2 Replies)
Discussion started by: oidipus
2 Replies
LEARN ABOUT SUSE
tnm::udp
udp(n) Tnm Tcl Extension udp(n)
__________________________________________________________________________________________________________________________________________________NAME
udp - Send and receive UDP datagrams.
_________________________________________________________________DESCRIPTION
The udp command allows to send and receive datagrams using the User Datagram Protocol (UDP) (RFC 768).
UDP COMMAND
udp open [port]
The udp open command opens a UDP datagram socket and returns an udp handle. The socket is bound to given port number or name. An
unused port number is used if the port argument is missing.
udp connect host port
The udp connect command opens a UDP datagram socket and connects it to a port on a remote host. A connected UDP socket only allows
to send messages to a single destination. This usually allows to shorten the code since there is no need to specify the destination
address for each udp send command on a connected UDP socket. The command returns a udp handle.
udp send handle [host port] message
The udp send command sends a datagram containing message to the destination specified by host and port. The host and port arguments
may not be used if the UDP handle is already connected to a transport endpoint. If the UDP handle is not connected, you must use
these optional arguments to specify the destination of the datagram.
udp receive handle
The udp receive command receives a datagram from the UDP socket associated with handle. This command blocks until a datagram is
ready to be received. In most cases, it might be a good idea to check for pending datagrams using the udp bind command.
udp close handle
The udp close command closes the UDP socket associated with handle.
udp bind handle readable [script]
udp bind handle writable [script]
The udp bind command allows to bind scripts to a UDP handle. A script is evaluated once the UDP handle becomes either readable or
writable, depending on the third argument of the udp bind command. The script currently bound to a UDP handle can be retrieved by
calling the udp bind command without a script argument. Bindings are removed by binding an empty string.
udp info [handle]
The udp info command without the handle argument returns a list of all existing UDP handles. Information about the state of a UDP
handle can be obtained by supplying a valid UDP handle. The result is a list containing the source IP address, the source port, the
destination IP address and the destination port.
SEE ALSO scotty(1), Tnm(n), Tcl(n)
AUTHORS
Juergen Schoenwaelder <schoenw@cs.utwente.nl>
Tnm udp(n)
10-18-2009
