disable port Post: 302362217

9 More Discussions You Might Find Interesting

1. Shell Programming and Scripting

How to disable Enable/Disable Tab Key

Hi All, I have bash script, so what is sintax script in bash for Enable and Disable Tab Key. Thanks for your help.:( Thanks, Rico

2. Linux

help on snare to disable a port

the plan is to disable the remote web interface in the SNARE config file ,i want to disable port 6161 from snare.conf and if port 6161 is not in use then some other port (80/81) gets enabled by default ? help me to find whether there are any vulnerabilities with this and also try to figure out how...

3. Solaris

How to enable Serial port on ILOM, when Network Port is enabled in parallel

Hi Everyone, In my environment, I have few T5220. On the iLOM Management Card, I have both Network and Serial port are cabled, I don't have any issues while I try to connect using Network Management port, but when I try to connect the serial port for the same server which is actually connected...

4. Red Hat

SSL/TLS renegotiation DoS -how to disable? Is it advisable to disable?

Hi all Expertise, I have following issue to solve, SSL / TLS Renegotiation DoS (low) 222.225.12.13 Ease of Exploitation Moderate Port 443/tcp Family Miscellaneous Following is the problem description:------------------ Description The remote service encrypts traffic using TLS / SSL and...

5. IP Networking

telnet for port 5433 is not working while it works for port 22

Hi, I am trying to set up a dev environment and I have Ubuntu server (10.16.1.92) and a CentOS VM (10.16.3.235) on this. On the CentOS I have a program running on port 5433. Now my problem is that I am unable to telnet this port from another Windows server whereas I can telnet port 22 from...

6. IP Networking

Tcp ip port open but no such process (merged: Release A Port)

i want to kill a tcp connection by killing its pid with netstat -an i got the tcp ip connection on port 5914 but when i type ps -a or ps-e there is not such process running on port 5914 is it possible that because i do not log on with proper user account i can not see that process running?

7. Solaris

Cabling and adapters to communicate to service processor serial port from Windows PC with USB port.

Hello, I have an unloaded T5140 machine and want to access the ILOM for the first time and subsequently the network port after that., and then load Solaris 10 the final January 2011 build. The first part is what confuses me -the cabling. I am coming from a Windows machine (w/appropriate...

8. Solaris

How to find port number wwn of particular port on dual port HBA,?

please find the below o/p for your reference bash-3.00# fcinfo hba-port HBA Port WWN: 21000024ff295a34 OS Device Name: /dev/cfg/c2 Manufacturer: QLogic Corp. Model: 375-3356-02 Firmware Version: 05.03.02 FCode/BIOS Version: BIOS: 2.02; fcode: 2.01;...

9. UNIX for Beginners Questions & Answers

Bash script, find the next closed (not in use) port from some port range.

hi, i would like to create a bash script that check which port in my Linux server are closed (not in use) from a specific range, port range (3000-3010). the print output need to be only 1 port, and it will be nice if the output will be saved as a variable or in same file. my code is: ...

LEARN ABOUT DEBIAN

fence_brocade

fence_brocade(8)					      System Manager's Manual						  fence_brocade(8)

NAME

       fence_brocade - I/O Fencing agent for Brocade FC switches

SYNOPSIS

       fence_brocade [OPTION]...

DESCRIPTION

       fence_brocade  is an I/O Fencing agent which can be used with Brocade FC switches.  It logs into a Brocade switch via telnet and disables a
       specified port.	Disabling the port which a machine is connected to effectively fences that machine.  Lengthy  telnet  connections  to  the
       switch should be avoided while a GFS cluster is running because the connection will block any necessary fencing actions.

       fence_brocade  accepts  options	on the command line as well as from stdin.  fenced sends parameters through stdin when it execs the agent.
       fence_brocade can be run by itself with command line options which is useful for testing.

       After a fence operation has taken place the fenced machine can no longer connect to the Brocade FC switch.   When  the  fenced  machine	is
       ready  to  be  brought  back into the GFS cluster (after reboot) the port on the Brocade FC switch needs to be enabled. This can be done by
       running fence_brocade and specifying the enable action.

       Vendor URL: http://www.brocade.com

OPTIONS

       -a IPaddress
	      IP address of the switch.

       -h     Print out a help message describing available options, then exit.

       -l login
	      Login name for the switch.

       -n port
	      The port number to disable on the switch.

       -o action
	      The action required.  disable (default) or enable.

       -p password
	      Password for login.

       -S path
	      Full path to an executable to generate the password for login.

       -q     Quiet mode: print only error messages.

       -V     Print out a version message, then exit.

STDIN PARAMETERS

       agent = < param >
	      This option is used by fence_node(8) and is ignored by fence_brocade.

       ipaddr = < hostname | ip >
	      IP address or hostname of the switch.

       login = < param >
	      Login name.

       option = < param >
	      The action required.  disable (default) or enable.

       passwd = < param >
	      Password for login.

       passwd_script = < param >
	      Full path to an executable to generate the password for login.

       port = < param >
	      The port number to disable on the switch.

SEE ALSO

       fence(8), fence_node(8)

																  fence_brocade(8)