I've been googling for a while now, trying to forward port 3000 to port 80....
In the past I used to DLink router to forward port 3000 to 80. I recently finished (well, is it ever done anyhow?) setting up my linux box and got it acting as a router.
I want to continue to run Apache on port 80... (1 Reply)
Hi,
I have to install an application that has a built in tftp server. Tftp comes in on port 69. As i am not installing this application as a root user i am running into trouble because only the root user can listen to ports < 1024. So changing the port i listen to to one greater than 1023 isn't... (1 Reply)
Hi friends
i have the following setup
machine1 two network adapters one connected to lan the other connected directly to machine2
machine2 is not connected to lan
i need to access machine2 directly from the LAN
how to force machine1 to forward all traffic received on a specific port the... (1 Reply)
Hi
I want to set up port forwarding from one network to another network. I already have this configured on the Linux box using iptables.
iptables -t nat -A PREROUTING -p tcp -i eth1 --dport 1521 -j DNAT --to 10.218.146.230
iptables -A FORWARD -p tcp -i eth1 -d 10.218.146.230 -j ACCEPT
... (2 Replies)
Hi; I have the following issue:
I have a Solaris server running an old applications which connects to an http server in other server at certain port. The thing is that the http server has changed its ip and port and the addres in the app is hard coded and touching the app by now is out of the... (0 Replies)
Hi Linux/Unix Guru,
I am setting Linux Hopping Station to another different servers.
My current config to connect to another servers is using different port to connect.
e.g
ssh -D 1080 -p 22 username@server1.com
ssh -D 1081 -p 22 username@server2.com
Now what I would like to have... (3 Replies)
Hello,
I have a routeur linksys (192.168.1.1 ) a firewall (192.168.1.55 IN ----> 192.168.2.254 OUT) which using iptable
I want to acces to an equipment (lorex video camera serveur 192.168.2.44) which using an ddns service on the port 9000
So i don t know which redirection a will do on the... (2 Replies)
Hi experts,
We have windows machine ( A ) in one network & 2 Linux Servers ( B & C ) in another network. There is a firewall between these 2 networks and SSH (TCP/22) & HTTPS (TCP/443) are allowed from A to B only (but not to C). There is no personal firewall / iptables running on any machine.... (1 Reply)
Hello Gurus,
I have configured port forwarding at router.
But after configuration I am not able to connect the computer from outside/Over internet/Remote desktp from other computer.
Could you please advice?
Thanks-
Pokhraj (2 Replies)
Hello All,
I would like to ask you very kindly with /etc/sysconfig/iptables file
I have to setup port forwarding on RHEL6 router. Users from public network must be able to ssh to servers in private network behind RHEL6 router. Problem is that servers in private network must be isolated.
My... (2 Replies)
Discussion started by: oidipus
2 Replies
LEARN ABOUT DEBIAN
jack.udp
JACK.UDP(1)JACK.UDP(1)NAME
jack.udp - JACK UDP Transport Client
SYNOPSIS
jack.udp [options] send|recv
OPTIONS -b : Set the ring buffer size in frames (default=4096). -c : Set the client name (default=jack.udp-PID). -n : Set the number of channels,
and therefore the number of JACK ports (default=2). -p : Set the port number (default=57160). -r : The remote host name, for use in send
mode (default="127.0.0.1").
DESCRIPTION
jack.udp is a UDP audio transport mechansim for JACK. The send mode reads signals from a set of JACK input ports and sends UDP packets to
the indicated port at the indicated host at a rate determined by the local JACK daemon. The recv mode reads incoming packets at the indi-
cated port and writes the incoming data to a set of JACK output ports at a rate that is determined by the local JACK daemon.
This transport mechanism is unreliable. Both send and recv clients will report buffer overflow and underflow occurences, and recv clients
will report dropped and out-of-order packets, and shutdown on channel mismatch packets. In practice this mechanism can be made highly reli-
able over local networks.
jack.udp implements no connection logic, use jack.plumbing(1) instead.
EXAMPLE
192.0.0.1:~$ jack.udp -r 192.0.0.2 send
192.0.0.2:~$ jack.udp recv
AUTHOR
Rohan Drape http://slavepianos.org/rd/
SEE ALSO jackd(1)AUTHOR
Rohan Drape <rd@slavepianos.org>
Author.
01/10/2012 JACK.UDP(1)