I can use screen /dev/remserial1 and that works fine. I think I need to specify the baud rate and comm settings of the virtual device.
Sounds like setting the baud rate is what these serial programs are failing on... it's not acting like a serial port, it's acting like a virtual terminal. A terminal emulator that insists on a real serial port might never accept it.
---------- Post updated at 02:34 PM ---------- Previous update was at 02:26 PM ----------
Quote:
Originally Posted by mvona
I used some command like
That's a very odd way to create a device file... Have you tried not doing this and just letting remserial create the device itself?
hi. Im trying to install a switch.
And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection.
However.. nothing about how to find this info.
Could anyone help me where to find this path?
thx
mr.T (6 Replies)
I have installed aix 5.2 on aix box through serial console connected to COM 1 . I even get a login prompt after the fresh installation . But as soon as i give a root & enter i again get a login prompt.i..e I am not able to logon after a fresh installation.
and even i configured IP configuration... (0 Replies)
I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac.
After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So... (1 Reply)
Hey!
I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk.
If i run cat /proc/bus/usb/devices
I get this information:
T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00... (2 Replies)
Hi community,
I've currently working on SUN Server V490 and I'm connecting with a Serial port (I DON'T HAVE ANY IP CONNECTIVITY)...I need to redirect the graphic interface of Oracle with the dbca command; I know a way with an IP Connectivity ( use a X-Server and then setenv DISPLAY... (7 Replies)
I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data.
It get only some data. What should I do to get altogether of data?
If all of... (7 Replies)
Hello all.
I have an old computer with M$-DOS 7. I want to use it like a dumb terminal, with telnet. I need to connect it to my desktop These are my questions:
How can i configure the serial port on dos?
How can i telnet form dos to the serial port?
How can i set up a telnet server on the... (12 Replies)
I am trying to change one of my serial printers from /dev/ttyr002 to /dev/ttyr014:
lpstat -s
device for check3: /dev/ttyr002
device for check4: /dev/ttyr002
I changed the tty setting for check3 in:
/etc/printcap
/var/spool/lp/admins/lp/printers/check3
to /dev/ttyr014
Then I get:... (4 Replies)
I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example:
echo "gpio set 7" > /dev/ttyACM0
...followed... (12 Replies)
Discussion started by: Chalk-X
12 Replies
LEARN ABOUT DEBIAN
cyclades-devices
cyclades-devices(5)cyclades-devices(5)NAME
cyclades-devices - tables for driving cyclades-serial-client
DESCRIPTION
The cyclades-devices file supplies all mapping between Unix device files (/dev/*) and the addresses of serial ports of Cyclades Terminal
Servers. It contains one entry for each serial port, with the following format:
device:rastype:rasname:physport:type:options
Note: A # character at beginning of line indicates a comment
The entry fields are:
devname
- A full pathname of the file that will be associated to the serial port. It must start with a "/dev/" preffix. Two naming schemes
may be used here: - devname does not exist, and will be linked to a free pseudo-tty. This is the default behavior of cyclades-ser-
cli. - devname is the name of a valid slave pseudo-tty. In this case, the '-t 1' option must be assigned in options field. (Note:
this option is not supported by this release).
rastype
- Terminal Server type: - prts, for Cyclades Pr302X/TS Terminal Servers. - path, for Cyclades PathRAS Terminal Server.
rasname
- Host Name or IP Address of the Terminal Server where the serial port resides.
physport
- Number of physical port in the Terminal Server. If treated as the IP address associated with this port, in a IP-based addressing
scheme.
type - Server type that will be contacted to handle the serial port: - rtelnet, for Remote Telnet Server - socket, for Socket Server
options
- Per-port specific options, passed to cyclades-ser-cli program.
EXAMPLES
1. Device on a PR3020/TS Terminal Server pr3k Port 1, accessed through /dev/ctty01 device file name, using telnet protocol (remote telnet
server)
/dev/ctty01:prts:pr3k:1:rtelnet:
2. The same device, but with an IP address pr3k_port1 associated to the serial port (IP-based port addressing)
/dev/ctty01:prts:pr3k_port1:0:rtelnet:
3. Device on a PathRAS Terminal Server pr3k Port 2, accessed through /dev/ctty02 device file name, using socket protocol (socket server)
/dev/ctty02:path:pr3k:2:socket:
FILES
/etc/cyclades-devices This file
SEE ALSO cyclades-serial-client(1), cyclades-ser-cli(1)cyclades-devices(5)