I can use screen /dev/remserial1 and that works fine. I think I need to specify the baud rate and comm settings of the virtual device.
Sounds like setting the baud rate is what these serial programs are failing on... it's not acting like a serial port, it's acting like a virtual terminal. A terminal emulator that insists on a real serial port might never accept it.
---------- Post updated at 02:34 PM ---------- Previous update was at 02:26 PM ----------
Quote:
Originally Posted by mvona
I used some command like
That's a very odd way to create a device file... Have you tried not doing this and just letting remserial create the device itself?
hi. Im trying to install a switch.
And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection.
However.. nothing about how to find this info.
Could anyone help me where to find this path?
thx
mr.T (6 Replies)
I have installed aix 5.2 on aix box through serial console connected to COM 1 . I even get a login prompt after the fresh installation . But as soon as i give a root & enter i again get a login prompt.i..e I am not able to logon after a fresh installation.
and even i configured IP configuration... (0 Replies)
I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac.
After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So... (1 Reply)
Hey!
I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk.
If i run cat /proc/bus/usb/devices
I get this information:
T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00... (2 Replies)
Hi community,
I've currently working on SUN Server V490 and I'm connecting with a Serial port (I DON'T HAVE ANY IP CONNECTIVITY)...I need to redirect the graphic interface of Oracle with the dbca command; I know a way with an IP Connectivity ( use a X-Server and then setenv DISPLAY... (7 Replies)
I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data.
It get only some data. What should I do to get altogether of data?
If all of... (7 Replies)
Hello all.
I have an old computer with M$-DOS 7. I want to use it like a dumb terminal, with telnet. I need to connect it to my desktop These are my questions:
How can i configure the serial port on dos?
How can i telnet form dos to the serial port?
How can i set up a telnet server on the... (12 Replies)
I am trying to change one of my serial printers from /dev/ttyr002 to /dev/ttyr014:
lpstat -s
device for check3: /dev/ttyr002
device for check4: /dev/ttyr002
I changed the tty setting for check3 in:
/etc/printcap
/var/spool/lp/admins/lp/printers/check3
to /dev/ttyr014
Then I get:... (4 Replies)
I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example:
echo "gpio set 7" > /dev/ttyACM0
...followed... (12 Replies)
Discussion started by: Chalk-X
12 Replies
LEARN ABOUT DEBIAN
shell-quote
SHELL-QUOTE(1p) User Contributed Perl Documentation SHELL-QUOTE(1p)NAME
shell-quote - quote arguments for safe use, unmodified in a shell command
SYNOPSIS
shell-quote [switch]... arg...
DESCRIPTION
shell-quote lets you pass arbitrary strings through the shell so that they won't be changed by the shell. This lets you process commands
or files with embedded white space or shell globbing characters safely. Here are a few examples.
EXAMPLES
ssh preserving args
When running a remote command with ssh, ssh doesn't preserve the separate arguments it receives. It just joins them with spaces and
passes them to "$SHELL -c". This doesn't work as intended:
ssh host touch 'hi there' # fails
It creates 2 files, hi and there. Instead, do this:
cmd=`shell-quote touch 'hi there'`
ssh host "$cmd"
This gives you just 1 file, hi there.
process find output
It's not ordinarily possible to process an arbitrary list of files output by find with a shell script. Anything you put in $IFS to
split up the output could legitimately be in a file's name. Here's how you can do it using shell-quote:
eval set -- `find -type f -print0 | xargs -0 shell-quote --`
debug shell scripts
shell-quote is better than echo for debugging shell scripts.
debug() {
[ -z "$debug" ] || shell-quote "debug:" "$@"
}
With echo you can't tell the difference between "debug 'foo bar'" and "debug foo bar", but with shell-quote you can.
save a command for later
shell-quote can be used to build up a shell command to run later. Say you want the user to be able to give you switches for a command
you're going to run. If you don't want the switches to be re-evaluated by the shell (which is usually a good idea, else there are
things the user can't pass through), you can do something like this:
user_switches=
while [ $# != 0 ]
do
case x$1 in
x--pass-through)
[ $# -gt 1 ] || die "need an argument for $1"
user_switches="$user_switches "`shell-quote -- "$2"`
shift;;
# process other switches
esac
shift
done
# later
eval "shell-quote some-command $user_switches my args"
OPTIONS --debug
Turn debugging on.
--help
Show the usage message and die.
--version
Show the version number and exit.
AVAILABILITY
The code is licensed under the GNU GPL. Check http://www.argon.org/~roderick/ or CPAN for updated versions.
AUTHOR
Roderick Schertler <roderick@argon.org>
perl v5.8.4 2005-05-03 SHELL-QUOTE(1p)