Hi,
I need to create a script that does the following:
1. Read the file for the occurrences of "EXECUTE" and "END" strings.
There will be several occurrences of EXECUTE and END strings on the file.
2. The resulting lines in #1, needs to be searched for the word... (11 Replies)
I need a simple script to get all lines between 2 Patterns,
e.g.
.............
.............
114456723: testing Script
Alpha
Beta
114459234: testing Done
.............
.............
It should give all the lines in between 114456723 and 114459234, including these as well.
Any... (2 Replies)
Hi Gurus,
I have a file say for ex. file1 which has 3500 lines in it which are different account numbers and another file (file2) which has 230000 lines in it. I want to read all the lines in file1 and delete all those lines from file2 which has that same pattern as in file1. I am not quite... (4 Replies)
I want to delete 1 line above the paatern and 3 line below the pattern and the pattern line itself, on the whole 5 lines. If there are three patterns what to do and the final text file to be captured in a new file. (3 Replies)
I need to print out sections (varying numbers of lines) of a file between patterns. That alone is easy enough: sed -n '/START/,/STOP/' I also need the 3 lines BEFORE the start pattern. That alone is easy enough: grep -B3 START But I can't seem to combine the two so that I get everything between the... (2 Replies)
Hi,
I want to print only lines (green-italic lines) in between first and last strings in column 9.
there are different number of lines between each strings.
10 AUGUSTUS exon 4558 4669 . - . 10.g1
10 AUGUSTUS exon 8771 8889 . ... (6 Replies)
I have a list in the format below, how do I read through the list and extract the lines between the ##START## and ##END##, so i can check for specific values between each ##START## & ##END## pattern
##START##
RANDOMTEXT
DFGSD
SDFSDF
##END##
##START##
morestuff
sdfggfg
sdfsdf... (10 Replies)
im using the following code to search a log for entries on two different lines:
awk 'BEGIN{count=0} /'"${firstpattern}"'/,/'"${secondpattern}"'/ { print; if ($0 ~ /'"${thirdpattern}"'/){count++}; } END { print count }' data.txt
firstpattern="start error log"
secondpattern="i am logging the... (1 Reply)
Hi, I need to print lines which are matching with start pattern "SELECT" and END PATTERN ";" and only select the last "select" statement including the ";" .
I have attached sample input file and the desired input should be as:
INPUT FORMAT:
SELECT
ABCD,
DEFGH,
DFGHJ,
JKLMN,
AXCVB,... (5 Replies)
Discussion started by: nani2019
5 Replies
LEARN ABOUT V7
vp
VP(4) Kernel Interfaces Manual VP(4)NAME
vp - Versatec printer-plotter
DESCRIPTION
Vp0 is the interface to a Versatec D1200A printer-plotter with a Versatec C-PDP11(DMA) controller. Ordinarily bytes written on it are
interpreted as ASCII characters and printed. As a printer, it writes 64 lines of 132 characters each on 11 by 8.5 inch paper. Only some
of the ASCII control characters are interpreted.
NL performs the usual new-line function, i.e. spaces up the paper and resets to the left margin. It is ignored however following a CR
which ends a non-empty line.
CR is ignored if the current line is empty but is otherwise like NL.
FF resets to the left margin and then to the top of the next page.
EOT resets to the left margin, advances 8 inches, and then performs a FF.
The ioctl(2) system call may be used to change the mode of the device. Only the first word of the 3-word argument structure is used. The
bits mean:
0400 Enter simultaneous print/plot mode.
0200 Enter plot mode.
0100 Enter print mode (default on open).
040 Send remote terminate.
020 Send remote form-feed.
010 Send remote EOT.
04 Send remote clear.
02 Send remote reset.
On open a reset, clear, and form-feed are performed automatically. Notice that the mode bits are not encoded, so that it is required that
exactly one be set.
In plot mode each byte is interpreted as 8 bits of which the high-order is plotted to the left; a `1' leaves a visible dot. A full line of
dots is produced by 264 bytes; lines are terminated only by count or by a remote terminate function. There are 200 dots per inch both ver-
tically and horizontally.
When simultaneous print-plot mode is entered exactly one line of characters, terminated by NL, CR, or the remote terminate function, should
be written. Then the device enters plot mode and at least 20 lines of plotting bytes should be sent. As the line of characters (which is
20 dots high) is printed, the plotting bytes overlay the characters. Notice that it is impossible to print characters on baselines that
differ by fewer than 20 dot-lines.
In print mode lines may be terminated either with an appropriate ASCII character or by using the remote terminate function.
FILES
/dev/vp0
SEE ALSO opr(1)VP(4)