Sponsored Content
Operating Systems Solaris problem network with solaris 10 & vmware Post 302361476 by capilla on Tuesday 13th of October 2009 09:46:38 AM
Old 10-13-2009
Hello
Solved. The problem was the gateway. When I put ipconfig in win xp I see:
Configuración IP de Windows


Code:
Adaptador Ethernet Conexión de área local          :

        Sufijo de conexión específica DNS : ctti.local
        Dirección IP. . . . . . . . . . . : 192.168.209.149
        Máscara de subred . . . . . . . . : 255.255.255.0
        Puerta de enlace predeterminada   : 192.168.209.1

Adaptador Ethernet VMware Network Adapter VMnet8          :

        Sufijo de conexión específica DNS :
        Dirección IP. . . . . . . . . . . : 192.168.116.156
        Máscara de subred . . . . . . . . : 255.255.255.0
        Puerta de enlace predeterminada   :

Adaptador Ethernet VMware Network Adapter VMnet1          :

        Sufijo de conexión específica DNS :
        Dirección IP. . . . . . . . . . . : 192.168.199.163
        Máscara de subred . . . . . . . . : 255.255.255.0
        Puerta de enlace predeterminada   :

On the solaris I put the ip 192.168.199.163, but when I try to do ping to 192.168.199.163 i don't have response. In the vmware virtual network Editor i can see NAT --> gateway 192.168.199.2 i put this gateway and works ok
Note: curiosly I can't do ping to VMware Network Adapter 192.168.199.163
 

10 More Discussions You Might Find Interesting

1. UNIX for Dummies Questions & Answers

Problem installing Solaris 8 on VMware 2.0.3

Hi folks! i've just downloaded the three SOlaris 8 Free install-CDs, then went to install it in a VM on VMware 2.0.3, okay DCA and CD inserted, DCA configured all devices - THEN at the selection of the boot device - selected CD - getting DISK READ ERROR at sector 120. Can anyone help?!!!... (1 Reply)
Discussion started by: __kernelpanic
1 Replies

2. UNIX for Dummies Questions & Answers

problem with Solaris in Network configuration

WEe have installed Intel version of Solaris 8 in a machine .we skipped the network configuration at the begning.we selected unnetworked.Now we need to connect the same machine to a network. We configured the Card using ifconfig but its taking the ip address itself as the Default G/W. I need help... (4 Replies)
Discussion started by: premkumar
4 Replies

3. IP Networking

solaris network problem

hello i had soloaris 8 installed . at the beggining it sees my network card( intel i815/82559 onboard)(my mainboard is GA-8IRXP); but during the installation when I fill the ip address and the dns at the end that i should confirm it says: no dns find (i'm sure about the dns... (4 Replies)
Discussion started by: hessam
4 Replies

4. Linux

VMware ESX server && Solaris 10 on same PC ??

Hi all, I tried to install Solaris 10 and then VMware ESX server v3.02 on the same PC (or hard drive). But after successfully installing Solaris 10, when I installed Vmware ESX Server on the same drive(but on different partition, boot menu is not coming. It is just booting Vmware only. Pls... (1 Reply)
Discussion started by: vikas027
1 Replies

5. Solaris

Problem with USB - solaris 10 on VMware

I am running solaris 10 on VMware and I do not know how to setup the USB drive. After refer to few doc from sun still unable to get what i should do. Can someone help? On VMware I have added a USB controller. Oh yes, from prtconf and dmesg, it don't seem to reganize the usb controller. I... (0 Replies)
Discussion started by: ezsurf
0 Replies

6. Solaris

common network problem under Solaris 10 ?

Hi there, I run a SunFire v245 with solaris 10. I run a custom ERP on that. my clients are connecting via telnet and run the application... my last "server" was a sun blade 100 with solaris 8, everything was running correctly. Since I have the new server, I have many problem with my... (5 Replies)
Discussion started by: Siffleu
5 Replies

7. Solaris

cant setup network Sun Solaris 10 on Vmware

Hi all, I have install sun solaris 10 on vmware server and i cant ping the solaris guest machine from the host and vice versa. The enable network card in the host machine is an wifi card so I know that i can't use bridged network from Vmware. I tried to use host or NAT but it seem not to work... (1 Reply)
Discussion started by: papiseckfr
1 Replies

8. Solaris

Problem with network printer on Solaris.

Hi All, We have configured an hp network printer on a Solaris-sparc machine. We are unable to print any files from this machine. The following are the other details: lpstat -p hpnic -l printer hpnic waiting for auto-retry. available. exec exit fault Form mounted: ... (0 Replies)
Discussion started by: shahshilpa
0 Replies

9. UNIX for Advanced & Expert Users

Network Shell Script & Blade Logic & Network Security

I am going to take up a position in Data & Network Security. I would need to write network shell scripts doing the following task: Going to around 2000 servers and findout which groups has access to each servers and which ids are there in each group that has access. I need to implement... (1 Reply)
Discussion started by: pinnacle
1 Replies

10. Solaris

External Network Connectivity w/Oracle VM Server for SPARC & Solaris 11

Hello all, thanks for reading my question: So I've been a Unix/Linux SysAdmin for a couple years, and I'm a bit over my head running solo, trying to set up LDoms using Oracle VM Server 3.1 for SPARC. I've been very careful, and things have gone well up until the point I try to access the new... (9 Replies)
Discussion started by: Lyxix
9 Replies
VDE_L3(1)						      General Commands Manual							 VDE_L3(1)

NAME
vde_l3 - Virtual Distributed Ethernet 'Layer 3' Switch. SYNOPSIS
vde_l3 -v vde_plug:ipaddress/netmask [-v...] [-r target_network/netmask:gateway] [-G default_gw] [-M mgmt_socket] DESCRIPTION
A vde_l3 connects to one or more vde_switches, performing ip forwarding among its virtual interfaces. A new interface is created at startup for each -v option given at command line. Static routes to target networks can be defined using the -r option. vde_l3 -v /var/run/s1.ctl:192.168.0.1/24 connects to the vde sock at /var/run/s1.ctl with its virtual interface ve0, having the address 192.168.0.1 and netmask 255.255.255.0. vde_l3 -v /var/run/s1.ctl:192.168.0.1/24 -v /var/run/s2.ctl:10.0.0.254/255.255.0.0 connects to the two vde socks, with its virtual interfaces ve0 and ve1, having addressess 192.168.1.0 and 10.0.0.254 respectively. Hosts in each network can specify the vde_l3 as their gateway to reach the other one. OPTIONS
-v vde_plug:ipaddress/netmask Creates a virtual network interfaces on the vde_l3 box, with address ipaddress and netmask netmask. Please note that the netmask can be specified either in the 'classic' A.B.C.D mode, or just by giving the number of leading bits (f.e., /17 for 255.255.128.0). One can define as many interfaces as she wants. -r target_network/netmask:gateway Specify a static route through gateway to reach hosts in target_network with netmask netmask. One can define as many routes as she wants. -G default_gw Specify a default gateway, to be used whenever no static route is defined for a target host. -M mgmt_socket the unix socket where the parameters (interfaces addresses, routes, etc.) can be checked and changed runtime. unixterm(1) can be used as a remote terminal for wirefilter. NOTICE
Virtual Distributed Ethernet is not related in any way with www.vde.com ("Verband der Elektrotechnik, Elektronik und Informationstechnik" i.e. the German "Association for Electrical, Electronic & Information Technologies"). SEE ALSO
vde_switch(1), vdeq(1), unixterm(1), vde_cryptcab(1), wirefilter(1). AUTHORS
VDE_L3 is a tool by Daniele Lacamera <root@danielinux.net> VDE is a project by Renzo Davoli <renzo@cs.unibo.it> Virtual Distributed Ethernet May 7, 2007 VDE_L3(1)
All times are GMT -4. The time now is 08:32 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy