Loading SCO 507 on HP ProLiant ML350 G6 Post: 302361176

8 More Discussions You Might Find Interesting

1. SCO

Sco Unixware 7.1.3 hangs in installation during loading of IDE

Hello, i'm mostly a linux person, so I have some experience in unix. I don't even know where to start with unixware though. I boot, anwser a couple questions in the installer, and when it comes to detecting and loading the drivers, it hangs as 90% when loading "IDE". I press crtl-alt-esc and it...

2. SCO

SCO 5.0.5 want to install on ML350 G5

Hi Can any one suggest me how i will install SCO 5.0.5 on new server ML350 G5 as vendar says this machine is not compatable for SCO 5.0.5 this machine only can support SCO 5.0.7 but i dont want to install SCO 5.0.7 . OR which machine is available in the market for SCO 5.0.5 . Waiting for...

3. SCO

Problems installing a tape storageworks on ML350 G5 with sas hdd and 29320alp card

I just install UNIX SCO 5.0.7 on a new Proliant ML 350 G5 with hpsas driver on an smart array E200i, i just realized that it doesn have an scsi port for the tape unit (storageworks dat40), just add a scsi card 29320ALP pcix card, installed the ad320 driver downloaded from adaptec and from sco site,...

4. SCO

Installing SCO OpenServer v5.07 on an HP ML350 G5 server

Hi there We are trying to install SCO OpenServer v5.07 on an HP ML350 G5 server. I have downloaded the drivers from HP's website, but are getting nowhere. (I feel that I am going round in circles - every time I google for the drivers, I end up here.) :( What happens is we create the driver...

5. Shell Programming and Scripting

Function loading in a shell scripting like class loading in java

Like class loader in java, can we make a function loader in shell script, for this can someone throw some light on how internally bash runs a shell script , what happenes in runtime ... thanks in advance..

6. SCO

Getting error sco unix 507 from cdrom:no controller for device you chosen

Installing SCO UNIX 507 on Dell Poweredge T610. It has no floppy so I downloaded the BTLD onto CD from SCO site to load without floppy drive. BTLD loads ok. when i get to the Media to be used, no matter what option i chose i get the error: No controller for device you have chosen. During bootup you...

7. UNIX for Advanced & Expert Users

Help me to install UNIXware 7.1.4 on hp ml350 g6 server

hi all i have hp proliant ml350 g6 , i want install unixware 7.1.4 , i excute steps installation but an error ocured hard disk not found after completed install HBA DRIVER , when chnage using DCU utility from automatic to mannul some reseason like unkow device see must be configure can you help...

8. SCO

SCO 5.0.7 driver for HP SmartArray P410i Controller on Proliant DL380 G7?

Hi I hope this is the right forum. I am attempting to install SCO 5.0.7 on a Proliant DL380 G7 with a Smart Array P410I Controller. I need a driver for this. Can anybody point me to a download? Thanks in anticipation.

LEARN ABOUT DEBIAN

pxfw

pxfw(8) 							     pxfw 0.5								   pxfw(8)

NAME

       pxfw - Firmware flashing tool for Plextor CD/DVD devices

SYNOPSIS

       pxfw -l
       pxfw -d DEVICE [-if firmware.bin] [-u] [-f] [-v]
       pxfw -d DEVICE [-e] [-r] [-t] [-v]

DESCRIPTION

       pxfw is the linux firmware flasher for Plextor CD and DVD drives.  Remove any disks before flashing.

FEATURES

       You can flash the firmware of these drives:
       Plextor Premium, Premium-2, PX-712, PX-716, PX-755 and PX-760.

DEVICE

       can be an IDE, SCSI, SATA, USB or FireWire connected optical drive. Not all SATA controller support all Plextor features.

       Linux:
       /dev/hdX: IDE device
       /dev/scdX: Linux 2.4: SATA, SCSI, USB device, or IDE device via ide-scsi emulation
       /dev/srX: Linux 2.6: IDE device via new ATA layer, SCSI or USB device

       OpenBSD/NetBSD:
       /dev/rcdX

       FreeBSD:
       /dev/cd: SCSI device
       /dev/acd: ATA device

       MacOS X:
       /dev/disk:

       win32:
       C:,D:,E:, ... X:,Y:,Z:

OPTIONS

       -l   scan busses for all available CD and DVD devices

       -if  select inputfile. Specify the firmware binary file, which should
	    be written to DEVICE.

       -u   proceed update. When the firmware checksum test has succeeded,
	    write firmware to DEVICE.

       -f   force flashing. Even if DEVICE is not recognized, or firmware.
	    checksum has failed, firmware writing will be forced.
	    Handle with care.

       -e   read EEPROM from DEVICE.

       -r   reboot the device.

       -t   test which opcodes are supported by the device.

       -v   debug.

EXAMPLES

       pxfw -d /dev/hdc -if 755_1.07.bin -u
       writes firmware file 755_1.07.bin into Master Drive on Secondary IDE-Port.

       pxfw -d /dev/sr3 -e -oe file.foo
       reades EEPROM from device /dev/sr3 and writes it to file.foo.

       please report man page improvements to T.Maguin@web.de

Gennady ShultZ Kozlov						  02 April, 2009							   pxfw(8)