hi. Im trying to install a switch.
And the manual says i should type a command including a SerialPortDevicePath. which is the filepath to serial port used for connection.
However.. nothing about how to find this info.
Could anyone help me where to find this path?
thx
mr.T (6 Replies)
I have installed aix 5.2 on aix box through serial console connected to COM 1 . I even get a login prompt after the fresh installation . But as soon as i give a root & enter i again get a login prompt.i..e I am not able to logon after a fresh installation.
and even i configured IP configuration... (0 Replies)
I am trying to access DG-100 gps logger on Mac OS X with POSIX API. The device uses a Prolific usb-serial controller, and connect to the usb port on my mac.
After I install the Prolific driver, it shows up as /dev/tty.usbserial and /dev/cu.usbserial. The vendor has published the data format. So... (1 Reply)
Hey!
I'm trying to figure out a sollution for a problem I have at my company with an Iomega MiniMax 500 GB USB disk.
If i run cat /proc/bus/usb/devices
I get this information:
T: Bus=01 Lev=02 Prnt=04 Port=00 Cnt=01 Dev#= 5 Spd=480 MxCh= 0
D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00... (2 Replies)
Hi community,
I've currently working on SUN Server V490 and I'm connecting with a Serial port (I DON'T HAVE ANY IP CONNECTIVITY)...I need to redirect the graphic interface of Oracle with the dbca command; I know a way with an IP Connectivity ( use a X-Server and then setenv DISPLAY... (7 Replies)
I have problem with C programming. I want to send & receive data through serial communication. I send data(command) to device to get data from device but when receive data, it can't get altogether of data.
It get only some data. What should I do to get altogether of data?
If all of... (7 Replies)
Hello all.
I have an old computer with M$-DOS 7. I want to use it like a dumb terminal, with telnet. I need to connect it to my desktop These are my questions:
How can i configure the serial port on dos?
How can i telnet form dos to the serial port?
How can i set up a telnet server on the... (12 Replies)
I am trying to change one of my serial printers from /dev/ttyr002 to /dev/ttyr014:
lpstat -s
device for check3: /dev/ttyr002
device for check4: /dev/ttyr002
I changed the tty setting for check3 in:
/etc/printcap
/var/spool/lp/admins/lp/printers/check3
to /dev/ttyr014
Then I get:... (4 Replies)
I'm new to Linux (Ubuntu 16.04), and very new to BASH scripting. I have a Numato 8-channel USB GPIO device, which is a DAQ that appears in the system as a serial port. In Linux it appears as ttyACM0. I can easily manipulate a GPO with, for example:
echo "gpio set 7" > /dev/ttyACM0
...followed... (12 Replies)
Discussion started by: Chalk-X
12 Replies
LEARN ABOUT DEBIAN
pscp
pscp(1) PuTTY tool suite pscp(1)NAME
pscp - command-line SCP (secure copy) / SFTP client
SYNOPSIS
pscp [options] [user@]host:source target
pscp [options] source [source...] [user@]host:target
pscp [options] -ls [user@]host:filespec
DESCRIPTION
pscp is a command-line client for the SSH-based SCP (secure copy) and SFTP (secure file transfer protocol) protocols.
OPTIONS
The command-line options supported by pscp are:
-V Show version information and exit.
-pgpfp Display the fingerprints of the PuTTY PGP Master Keys and exit, to aid in verifying new files released by the PuTTY team.
-ls Remote directory listing.
-p Preserve file attributes.
-q Quiet, don't show statistics.
-r Copy directories recursively.
-unsafe
Allow server-side wildcards (DANGEROUS).
-v Show verbose messages.
-load session
Load settings from saved session.
-P port
Connect to port port.
-l user
Set remote username to user.
-batch Disable interactive prompts.
-pw password
Set remote password to password. CAUTION: this will likely make the password visible to other users of the local machine (via com-
mands such as `w').
-1 Force use of SSH protocol version 1.
-2 Force use of SSH protocol version 2.
-C Enable SSH compression.
-i path
Private key file for authentication.
-scp Force use of SCP protocol.
-sftp Force use of SFTP protocol.
MORE INFORMATION
For more information on pscp it's probably best to go and look at the manual on the PuTTY web page:
http://www.chiark.greenend.org.uk/~sgtatham/putty/
BUGS
This man page isn't terribly complete. See the above web link for better documentation.
PuTTY tool suite 2004-03-24 pscp(1)