10-05-2009
Yes, after running the command reboot -- -r I could see now the creation of new devpath /dev/rmt/1cbn, and through the netbackup software i reconnected the missing path to this one. Things are ok so far and the backup started as expected.
I realy appreciate your help.
---------- Post updated at 01:00 AM ---------- Previous update was at 12:58 AM ----------
I have another request collegues.
I am interested to replace a faulty hard disk which is not mirorred. it is containing ex ./dev/vx/rdsk/Vol1 file system.
But i have some ideas in my mind and I wish if you can correct me if wrong
1- backup the files system using ufsdump utility to a tape
ufsdump 0uf /dev/rmt/0m /Vol1
2- umount the file system
3- Replace the faulty hard disk.
4- create new file system on the new hard disk
newfs /dev/rdsk/c1t1d0s0
5- Mount /Vol1 on the ne file system.
mount /dev/dsk/c1t1d0s0 /Vol1
6- Restore from backup.
ufsrestore -rvf /dev/rmt/0m
Are these steps correct particularly point no 4.?
7 More Discussions You Might Find Interesting
1. Filesystems, Disks and Memory
Hi
I have 2 75GB SCSI hard drives and 2 250GB SATA hard drives which are using RAID Level 1 respectively. I wana have both FTP and Apache installed on them as services. I'm wondering what's the best partitioning schem? I wana use FC3 as my OS, so, I thought I can use the 75GB hard drive as the /... (0 Replies)
Discussion started by: sirbijan
0 Replies
2. UNIX for Dummies Questions & Answers
Anyone know how I can map a windows drive to an apache shared drive?
In my httpd.conf file, I have:
Alias /merc_rpts/ "/u/merc_rpts/"
<Directory "/u/merc_rpts">
Options Indexes
</Directory>
I'm able to bring up a browser and see the contents of this folder.
In... (0 Replies)
Discussion started by: gseyforth
0 Replies
3. SCO
Can anybody help me out to mount USB flash /floppy drive in sco openserver 6.0 . (5 Replies)
Discussion started by: sureshdrajan
5 Replies
4. Shell Programming and Scripting
I have input file like this
Input file:
ABC|abc_etc_passwd
XYZ|XYZ_etc_passwd
zXY|XYZ_etc_passwd
IJK|test_etc_passwd
KLM|test_etc_passwd
i want to do following in a loop.
grep 'ABC' *abc_etc_passwd*
grep 'XYZ' *XYZ_etc_passwd*
grep 'ZXY' *ZXY_etc_passwd*
i have tried this
for i... (2 Replies)
Discussion started by: pinnacle
2 Replies
5. Hardware
I have a 320 GB drive which dual boots Windows and Debian:
Disk /dev/sda: 320.1 GB, 320072933376 bytes
255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal):... (0 Replies)
Discussion started by: phillipsoasis
0 Replies
6. UNIX for Dummies Questions & Answers
Hi Guys,
Can any one help me on this.
I need help to move .csv/.xls file from unix path to windows shared drive or c:\ drive?
Regards,
LKR (1 Reply)
Discussion started by: lakshmanraok117
1 Replies
7. Solaris
Hi,
I am facing issue with one of the drive is solaris 10. it is showing offline in the messages file
scsi: WARNING: /pci@2,600000/QLGC,qlc@0/fp@0,0/ssd@w5006016746e00b1b,0 (ssd0):
drive offline
genunix: WARNING: Page83 data not standards compliant DGC LUNZ 0430
... (1 Reply)
Discussion started by: Prasanth T K
1 Replies
LEARN ABOUT OPENSOLARIS
mkdevalloc
mkdevalloc(1M) System Administration Commands mkdevalloc(1M)
NAME
mkdevalloc - Make device_allocate entries
SYNOPSIS
/usr/sbin/mkdevalloc
DESCRIPTION
The mkdevalloc command writes to standard out a set of device_allocate(4) entries describing the system's frame buffer, audio and removable
media devices.
The mkdevalloc command is used by the init.d(4) scripts to create or update the /etc/security/device_allocate file.
Entries are generated based on the device special files found in /dev. For the different categories of devices, the mkdevalloc command
checks for the following files under /dev:
audio /dev/audio, /dev/audioctl, /dev/sound/...
tape /dev/rst*, /dev/nrst*, /dev/rmt/...
floppy /dev/diskette, /dev/fd*, /dev/rdiskette, /dev/rfd*
removable disk /dev/sr*, /dev/nsr*, /dev/dsk/c0t?d0s?, /dev/rdsk/c0t?d0s?
frame buffer /dev/fb
All entries set the device-minimum and device-maximum fields to the hex representations of ADMIN_LOW and ADMIN_HIGH, respectively. The
device-authorization field is set to solaris.device.allocate, except for the framebuffer entry, where it is set to *. The device-name,
device-type and device-clean fields are set to the following values:
device-name device-type device-clean
audio audio audio audio_clean_wrapper
tape mag_tape_0,1,... st st_clean
floppy floppy_0,1,... fd disk_clean
removable disk cdrom_0,1,... sr disk_clean
frame buffer framebuffer fb /bin/true
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Obsolete |
+-----------------------------+-----------------------------+
SEE ALSO
allocate(1), bsmconv(1M), attributes(5)
NOTES
mkdevalloc might not be supported in a future release of the Solaris operating system.
SunOS 5.11 8 Oct 2003 mkdevalloc(1M)