Ladies and Gentlemen:
I am short on time and need to get up to speed fast on the use of flash archives. I am very familiar with Jumpstart and have used it successfully for the past 5 years. The current project I am working on requires optimization of time and speed when deploying systems which is... (0 Replies)
Ladies and Gentlemen:
I am short on time and need to get up to speed fast on the use of flash archives. I am very familiar with Jumpstart and have used it successfully for the past 5 years. The current project I am working on requires optimization of time and speed when deploying systems which is... (4 Replies)
I have created a bootable DVD for X86 using a flash archive, the problem is that I have to specify the location at the beginning of the install.
I have edited the any_machine profile under ./jumpstart_sample to contain the following
install_type flash_install
archive_location ... (4 Replies)
i had a situation where an app i was running just didn't have enough resources on a proliant dl365 (running sol10x86). so i ended up building out a dl385g2. the dl365 had zfs root file system which was managing the whole disk (smart array taking the raid 1+0). anyway, i figured i could migrate the... (2 Replies)
I've been running 64-bit Ubuntu for about 2 years now, but a few days ago it developed serious problems. Whenever I would load a Flash page* the computer would crash... well, sort of. The screen would go blank immediately, eventually causing the monitor to give the "no video detected" message. ... (0 Replies)
I've been running 64-bit Ubuntu for about 2 years now, but a few days ago it developed serious problems. Whenever I would load a Flash page* the computer would crash... well, sort of. The screen would go blank immediately, eventually causing the monitor to give the "no video detected" message. The... (2 Replies)
Hi,
Here is the issue. From the program snippet I have Base: 0x1800000000, Size: 0x3FFE7FFFFFFFF which are of 40 and 56 bits. SO I used use bignum to do the math but summing them up I always failed having correct result.
perl interpreter info,
perl, v5.8.8 built for... (0 Replies)
Discussion started by: rrd1986
0 Replies
LEARN ABOUT DEBIAN
file-roller
file-roller(1) General Commands Manual file-roller(1)NAME
file-roller - archive manager for GNOME
SYNOPSIS
file-roller [OPTIONS...] [FILE...]
DESCRIPTION
File Roller is a graphical interface to archiving utilities such as tar and zip.
It supports most common operations such as creating, modifing and extracting files from an archive. You can also view the contents of an
archive and open files contained in the archive.
OPTIONS -a, --add-to=ARCHIVE
Add files to the specified archive and quit the program
-d, --add FILE
Add files asking the name of the archive and quit the program
-e, --extract-to=FOLDER
Extract archives to the specified folder and quit the program
-f, --extract
Extract archives asking the destination folder and quit the program
-h, --extract-here
Extract archives using the archive name as destination folder and quit the program
--default-dir=FOLDER
Default folder to use for the '--add' and '--extract' commands
--force
Create destination folder without asking confirmation
This program also accepts the standard GNOME and GTK options.
AUTHORS
file-roller is written by Paolo Bacchilega <paolo.bacch@tin.it>.
This manual page was written by Sven Arvidsson <sa@whiz.se>, for the Debian project (but may be used by others).
SEE ALSO gtk-options(7), gnome-options(7)
The online documentation available through the program's Help menu.
GNOME 2007-09-27 file-roller(1)