restart the network on freeBSD 7.2 Post: 302357384

9 More Discussions You Might Find Interesting

1. Programming

Application crashes in FreeBSD 7.1 while working ok in FreeBSD 6.3

Hello there, My mulithreaded application (which is too large to represent the source code here) is crashing after installing FreeBSD 7.1-RELEASE/amd64. It worked properly on others machines (Dual Cores with 4GB of RAM - FreeBSD 6.2-RELEASE/i386). The current machine has 2x Core 2 Duo...

2. Programming

Help in developing a Network Appliation to monitor pc in a network

I am developing a Network Appliation to monitor computers in a network. Specs are App monitors the current web page viewed in each system App also can shutdown the computer in the network App can show all process run by each computer in the network I am now confused how to start my...

3. IP Networking

ssh server is attachable from local network not from another network

hello i have a ubuntu ssh server that i can acess from any of my comnputers but only if they are on the same wireless network as the server. i tested trhis my tehtehring my samsung blackjack to my windows partition and installing openssh to windows it works when windows is on the wireless but no...

4. AIX

How restart the network interface in AIX?

Hi All, Please let me know the command to restart the network interface and enable it on boot in AIX, similar to /etc/init.d/network restart in Redhat. Thanks, Sunil.K please watch out to post in the right subforum!

5. IP Networking

Test Network Routing Issues (FREEBSD and RHEL)

Hello, I'm attempting to setup a test network with a client-server based architecture using a proprietary application. The client works by communicating with the server on separate links (typically cellular connections) and then initiates a tunnel over each active link. However, in place of the...

6. Red Hat

Network becomes slow and return fast only after restart network

Hi, I have 2 machines in production environment: 1. redhat machine for application 2. DB machine (oracle) The application doing a lot of small read&writes from and to the DB machine. The problem is that after some few hours the network from the application to the DB becomes very slow and...

7. IP Networking

I would like to monitor network traffic for a computer on my network

My son does homework on a school laptop. I was thinking about setting up a gateway on my home network, so that I can monitor web traffic and know if he is doing his homework without standing over his shoulder. Ideally I would like to use the Raspberry Pi Model b that I already have. However, I...

8. Solaris

Changing "rx_queue_number" in "ixgbe.conf". Reboot or Network Restart?

Hi all, First post here. Working on Solaris 10, on a Sun t4-4, need to change RX queue depth(ethernet, not HBA) and was wondering if i could get by with just restarting the network or if i should just bounce the whole shebang. Apologies if i missed a similar thread. if there is one, please...

9. Debian

How do i correct restart network-services in Debian?

Hello, I would like to do follow steps. Set a static IP-Adress on eth0 (For Testing) Set DHCP on eth0 All steps should be done without a single reboot. /etc/network/interfaces iface eth0 inet static address 192.0.2.7/24 gateway 192.0.2.254How do i perform...

LEARN ABOUT DEBIAN

essidscan

ESSIDSCAN(8)							     Commands							      ESSIDSCAN(8)

NAME

       essidscan - scan for ESSID corresponding to available WLAN access points

SYNOPSIS

       In /etc/network/interfaces:

       mapping <interface> script essidscan

DESCRIPTION

       The essidscan utility is used to tell the ifup and ifdown utilities about the current SSID of the WLAN currently being accessed.  It can be
       used to map the SSID name to an iface stanza.

CONFIGURATION

       A sample /etc/network/interfaces may look like this:

	  mapping hotplug
	    script /etc/network/essidscan
	    map SSIDONE  wlan-work
	    map SSIDTWO  wlan-work
	    map HOME

	  iface wlan-work inet dhcp
	    wireless-key     1234-5678-9ABC-DEF0-1234-5678-9A
	    wireless-keymode restricted

	  iface HOME inet static
	    address	     192.168.2.4
	    netmask	     255.255.255.0
	    gateway	     192.168.2.1
	    wireless-essid   HOME
	    wireless-key     s:somepassword
	    wireless-keymode open

	  iface DEFAULT inet dhcp

FILES

       /etc/network/interfaces
	      the interfaces definition file

       /etc/network/run/ifstate
	      a record of the current state of the interfaces, managed by ifup and ifdown

SEE ALSO

       interfaces(5) ifscheme(8) ifup(8) ifdown(8)

AUTHORS

       Tor Slettnes <tor@slett.net>

																      ESSIDSCAN(8)