Hi guys.
Am about to install Solaris10 x86 and I was wondering if there are any news as to whether it is possible or not to install the os on an external drive, especially firewire, I suppose I will have to open my tower and put in the drive to install it..the machine I want to put it on,... (0 Replies)
I have a 1TB hard disk that I had partitioned on a Sun clone and had 7 partitions of 137GB a piece. (Using a USB to SATA adaptor)
I then had loaded a new hard disk on my laptop (T60...Lenova) with Solaris 10 X86. I tried to mount the hard disk but it kept telling me the mount point was busy and I... (2 Replies)
Need to find the CPU speed of HP UX for a non root login.
echo "itick_per_usec/D" | adb /stand/vmunix /dev/mem | tail -1 will give the following for non root users
ERROR: cannot open `/dev/mem', errno = 13, Permission denied (2 Replies)
Need to find CPU Speed of zLinux.
The commands like cat /proc/cpuinfo and /usr/bin/cpufreq-info does not gave me the expected results.
/usr/bin/cpufreq-info prints the
....
analyzing CPU 0:
no or unknown cpufreq driver is active on this CPU
analyzing CPU 1:
no or unknown cpufreq... (1 Reply)
Hi All,
Anyone has configured a Sunix Sata S150 card (AKA Initio Inic-1622) + disk in a Solaris10/x86 05/09 system? I wondered what to do to get it running. The Sunix card does not come with a Solaris driver ;-(
The card is seen by the system as the prtconf -v output shows (see below at the... (0 Replies)
Dear All
I am using Core2Duo processor on G31 chipset motherboard
with 1 Gb RAM and 20 GB IDE HDD.
I tried to install Solaris 10 from DVD and it installs Successfully without any error. after the first reboot it stop at GRUB prompt.
I tried to many times with different partitions layout,... (9 Replies)
I can't mount flash drives and dvd drives on my x86 solaris 10.
The error message appears after login; sd_media_watch_cb: dev gone.
When I issue #mount /usb, it first shows disk is mounted or busy, and
'/dev/dsk/c3t0d0p1 - there is no such device or address' when I repeat
it. But the... (5 Replies)
Hi all,
Installed Solaris10(1/13) on a normal Lenovo Thinkcenter desktop. The installation could proceed only in text mode (4).
Install is success, but not able to get the login window after the grub screen. The screen goes blank. (as was the case when selecting desktop mode during... (7 Replies)
Discussion started by: Solaris_Begin
7 Replies
LEARN ABOUT OSX
psrinfo
psrinfo(1M) System Administration Commands psrinfo(1M)NAME
psrinfo - displays information about processors
SYNOPSIS
psrinfo [-p] [-v] [processor_id...]
psrinfo [-p] -s processor_id
DESCRIPTION
psrinfo displays information about processors. Each physical processor may support multiple virtual processors. Each virtual processor is
an entity with its own interrupt ID, capable of executing independent threads.
Without the processor_id operand, psrinfo displays one line for each configured processor, displaying whether it is on-line, non-interrupt-
ible (designated by no-intr), spare, off-line, faulted or powered off, and when that status last changed. Use the processor_id operand to
display information about a specific processor. See OPERANDS.
OPTIONS
The following options are supported:
-s processor_id Silent mode. Displays 1 if the specified processor is fully on-line. Displays 0 if the specified processor is non-inter-
ruptible, spare, off-line, faulted or powered off.
Use silent mode when using psrinfo in shell scripts.
-p Display the number of physical processors in a system.
When combined with the -v option, reports additional information about each physical processor.
-v Verbose mode. Displays additional information about the specified processors, including: processor type, floating point
unit type and clock speed. If any of this information cannot be determined, psrinfo displays unknown.
When combined with the -p option, reports additional information about each physical processor.
OPERANDS
The following operands are supported:
processor_id The processor ID of the processor about which information is to be displayed.
Specify processor_id as an individual processor number (for example, 3), multiple processor numbers separated by spaces
(for example, 1 2 3), or a range of processor numbers (for example, 1-4). It is also possible to combine ranges and (indi-
vidual or multiple) processor_ids (for example, 1-3 5 7-8 9).
EXAMPLES
Example 1: Displaying Information About All Configured Processors in Verbose Mode
The following example displays information about all configured processors in verbose mode.
psrinfo -v
Example 2: Determining If a Processor is On-line
The following example uses psrinfo in a shell script to determine if a processor is on-line.
if [ "`psrinfo -s 3 2> /dev/null`" -eq 1 ]
then
echo "processor 3 is up"
fi
Example 3: Displaying Information About the Physical Processors in the System
With no additional arguments, the -p option displays a single integer: the number of physical processors in the system:
> psrinfo -p
8
psrinfo also accepts command line arguments (processor IDs):
> psrinfo -p 0 512 # IDs 0 and 512 exist on the
1 # same physical processor
> psrinfo -p 0 1 # IDs 0 and 1 exist on different
2 # physical processors
In this example, virtual processors 0 and 512 exist on the same physical processor. Virtual processors 0 and 1 do not. This is specific to
this example and is and not a general rule.
EXIT STATUS
The following exit values are returned:
0 Successful completion.
>0 An error occurred.
ATTRIBUTES
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
SEE ALSO psradm(1M), p_online(2), processor_info(2), attributes(5)DIAGNOSTICS
psrinfo: processor 9: Invalid argument
The specified processor does not exist.
SunOS 5.10 21 Feb 2004 psrinfo(1M)