Hi guys.
Am about to install Solaris10 x86 and I was wondering if there are any news as to whether it is possible or not to install the os on an external drive, especially firewire, I suppose I will have to open my tower and put in the drive to install it..the machine I want to put it on,... (0 Replies)
I have a 1TB hard disk that I had partitioned on a Sun clone and had 7 partitions of 137GB a piece. (Using a USB to SATA adaptor)
I then had loaded a new hard disk on my laptop (T60...Lenova) with Solaris 10 X86. I tried to mount the hard disk but it kept telling me the mount point was busy and I... (2 Replies)
Need to find the CPU speed of HP UX for a non root login.
echo "itick_per_usec/D" | adb /stand/vmunix /dev/mem | tail -1 will give the following for non root users
ERROR: cannot open `/dev/mem', errno = 13, Permission denied (2 Replies)
Need to find CPU Speed of zLinux.
The commands like cat /proc/cpuinfo and /usr/bin/cpufreq-info does not gave me the expected results.
/usr/bin/cpufreq-info prints the
....
analyzing CPU 0:
no or unknown cpufreq driver is active on this CPU
analyzing CPU 1:
no or unknown cpufreq... (1 Reply)
Hi All,
Anyone has configured a Sunix Sata S150 card (AKA Initio Inic-1622) + disk in a Solaris10/x86 05/09 system? I wondered what to do to get it running. The Sunix card does not come with a Solaris driver ;-(
The card is seen by the system as the prtconf -v output shows (see below at the... (0 Replies)
Dear All
I am using Core2Duo processor on G31 chipset motherboard
with 1 Gb RAM and 20 GB IDE HDD.
I tried to install Solaris 10 from DVD and it installs Successfully without any error. after the first reboot it stop at GRUB prompt.
I tried to many times with different partitions layout,... (9 Replies)
I can't mount flash drives and dvd drives on my x86 solaris 10.
The error message appears after login; sd_media_watch_cb: dev gone.
When I issue #mount /usb, it first shows disk is mounted or busy, and
'/dev/dsk/c3t0d0p1 - there is no such device or address' when I repeat
it. But the... (5 Replies)
Hi all,
Installed Solaris10(1/13) on a normal Lenovo Thinkcenter desktop. The installation could proceed only in text mode (4).
Install is success, but not able to get the login window after the grub screen. The screen goes blank. (as was the case when selecting desktop mode during... (7 Replies)
Discussion started by: Solaris_Begin
7 Replies
LEARN ABOUT PLAN9
prtdiag
prtdiag(1M)prtdiag(1M)NAME
prtdiag - display system diagnostic information
SYNOPSIS
/usr/sbin/prtdiag [-v] [-l]
prtdiag displays system configuration and diagnostic information on sun4u and sun4v systems.
The diagnostic information lists any failed field replaceable units (FRUs) in the system.
The interface, output, and location in the directory hierarchy for prtdiag are uncommitted and subject to change in future releases.
prtdiag does not display diagnostic information and environmental status when executed on the Sun Enterprise 10000 server. See the
/var/opt/SUNWssp/adm/${SUNW_HOSTNAME}/messages file on the system service processor (SSP) to obtain such information for this server.
The following options are supported:
-l Log output. If failures or errors exist in the system, output this information to syslogd(1M) only.
-v Verbose mode. Displays the time of the most recent AC Power failure, and the most recent hardware fatal error information, and (if
applicable) environmental status. The hardware fatal error information is useful to repair and manufacturing for detailed diagnos-
tics of FRUs.
The following exit values are returned:
0 No failures or errors are detected in the system.
1 Failures or errors are detected in the system.
2 An internal prtdiag error occurred, for example, out of memory.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWkvm |
+-----------------------------+-----------------------------+
|Interface Stability |Unstable* |
+-----------------------------+-----------------------------+
*The output is unstable.
modinfo(1M), prtconf(1M), psrinfo(1M), sysdef(1M), syslogd(1M), attributes(5), openprom(7D)NOTES
Not all diagnostic and system information is available on every Solaris platforn, and therefore cannot be displayed by prtdiag. On those
platforms, further information can be obtained from the System Controller.
29 Aug 2005 prtdiag(1M)