Kernel Support Post: 302353590

9 More Discussions You Might Find Interesting

1. SuSE

max number of slabs per kernel module (kernel 2.6.17, suse)

Hi All, Is there a max number of slabs that can be used per kernel module? I'm having a tough time finding out that kind of information, but the array 'node_zonelists' (mmzone.h) has a size of 5. I just want to avoid buffer overruns and other bad stuff. Cheers, Brendan

2. Ubuntu

Does Posix support kernel level threading?

Hi All, Please let me know the following. 1) Does POSIX lib support kernel threads? if yes, please let me know what are the specific function calls used to create/manage kernel threads. 2) Is Posix scalable? 3) Does POSIX take the advantage of multiprocessor systems? your help is much...

3. Linux

Supermicro(dual core) server getting rebooted after "decompressing the kernel;booting the kernel" me

supermicro(dual core) server getting rebooted after "decompressing the kernel;booting the kernel" message comes. I tried giving acpi=off to the kernel command line but same problem.It shows everything ok and no problem with memory and processors and power supplies.Wt could be the reason? It has...

4. Solaris

Which file is read by kernel to set its default system kernel parameters values?

Hi gurus Could anybody tell me which file is read by kernel to set its default system kernal parameters values in solaris. Here I am not taking about /etc/system file which is used to load kernal modules or to change any default system kernal parameter value Is it /dev/kmem file or something...

5. UNIX for Dummies Questions & Answers

Make sure kernel was compiled with NFS server support

Hi there, I have a Debian Squeeze server. How can I check if my kernel was compiled with NFS server support? Extra question: if it is not, how do I enable NFS support in my kernel? Thanks for your help. Santiago

6. Ubuntu

Phenom II support in kernel

Does anyone know at which kernel version support for Phenom II x6 first appeared?

7. Linux

Unload kernel module at boot time (Debian Wheezy 7.2, 3.2.0-4-686-pae kernel)

Hi everyone, I am trying to prevent the ehci_hcd kernel module to load at boot time. Here's what I've tried so far: 1) Add the following line to /etc/modprobe.d/blacklist.conf (as suggested here): 2) Blacklisted the module by adding the following string to 3) Tried to blacklist the module...

8. IP Networking

[ipv6_test] Kernel is not compiled with IPv6 support

Hello, i tried to enable IPv6 networking and after service network restart i seen these messages: FATAL: Error inserting ipv6 (/lib/modules/2.6.18-348.16.1.el5.028stab108.1/kernel/net/ipv6/ipv6.ko): Device or resource busy CRITICAL : Kernel is not compiled with IPv6 support Bringing up...

9. Solaris

Older OS support in Kernel zones

folks, I have a query. Can we create Kernel zone with the earlier Solaris OS? More precisely Can i create kernel zone with any different OS than that of OS in global zone. As of now in sol11U2 if we create kernel zone, there will be sol11u2 OS in kernel zone since the same is in global. But...

LEARN ABOUT OSF1

pset_info

pset_info(1)						      General Commands Manual						      pset_info(1)

NAME

       pset_info - Displays processor set information

SYNOPSIS

       /usr/sbin/pset_info

DESCRIPTION

       The pset_info command displays information about processor sets and the processors that are assigned to each set.  Note that a stopped pro-
       cessor is not a member of any processor set, and its processor set identification number is specified as -1. Also, depending on the machine
       architecture, processors may not be numbered consecutively.  That is, a four-processor system may not have a processor with the number 3.

NOTES

       If  a  processor or processor set is queried while it is in transition (for example, processor set destruction or processor assignment), an
       error may be returned from the kernel.  Running the command a second time will result in normal behavior.

EXAMPLES

       The following is an example of the output of the pset_info command:

       number of processor sets on system = 2

       pset_id	# cpus	 # pids   # threads  load_av	created
	 0	   1	    26	     63        0.90	09/21/1994 17:48:42
	 6	   1	    1	     4	       0.21	09/21/1994 23:33:37

       total number of processors on system = 3

       cpu #	running  boot_cpu pset_id  assigned_to_pset
	0	   1	     1	     0	   09/21/1994 17:48:42
	1	   1	     0	     6	   09/21/1994 23:34:06
	2	   0	     0	      -1   09/21/1994 17:48:42

SEE ALSO

       Commands:  pset_assign_cpu(1), pset_assign_pid(1), pset_create(1), psradm(8)

       Files:  processor_sets(4)

																      pset_info(1)