09-15-2009
# dd if=/dev/hdisk11 of=/dev/hdisk20
4194304+0 records in.
4194304+0 records out.
thanks, i have tried it.. but the problem which i face is time
2GB took for me 2.5 hours
and i need to do it for 850 GB. because this will take 1062 hours
is there any faster method ?
9 More Discussions You Might Find Interesting
1. AIX
Hi,
How do I mirror an external scsi vg to one hdisk san? The vg has multiple hdisks and the san hdisk has only one.
Is this possible or do I need to create the same hdisks as the scsi? What I meant is, if the scsi vg has 10 hdisk then I need to create also 10 hdisk of san with the same... (6 Replies)
Discussion started by: itik
6 Replies
2. AIX
To summarize the problem: The "IBM FastT Storage Manager Client v8" shows that our Disk Farm is arranged into 6 logical drives each in a RAID 5 configuration. This software also shows that 5 of the 6 logical drives (from Disk Farm) are in a error state: "Failed Logical Drive - Drive Failure".... (1 Reply)
Discussion started by: aix-olympics
1 Replies
3. AIX
Hello,
I have AIX 6.1 with TL 4 and it is connected to IBM SAN STORAGE DS4700
After assigning some disks from SAN to AIX, I can see the disks in my AIX as
hdisk2 Available 05-00-02 MPIO Other DS4K Array Disk
hdisk3 Available 05-00-02 MPIO Other DS4K Array Disk
But it should... (0 Replies)
Discussion started by: filosophizer
0 Replies
4. Solaris
HI all,
I had recently change the Server storage from EMC to the IBM SAN.
but after the configuration, the IBM success to see the server HBA port and successfully assign a LUN for the server.
When i go to the server, and restarted it. i use the "format" command to check, but din see any... (1 Reply)
Discussion started by: SmartAntz
1 Replies
5. UNIX for Dummies Questions & Answers
hi guys
I installed Centos 5.5 (local disk). I am using 2 HBAs
Now I mapped 5 LUNs from a Storage.
I will be using LVM
just to test I assigned a LUN I've read I have to use multipath to avoid my Centos see the LUN twice
I enabled mdmpd and multipathd...
something else I should do?
... (8 Replies)
Discussion started by: kopper
8 Replies
6. AIX
Hello,
I have IBM SAN STORAGE DS4100 and one of the cache battery for the controller is dead. Suddenly the performance has been degraded and access to SAN disks ( reading and writing ) became very slow ?
My query: Replacing the battery will take 6 days, so in the mean time what are the ways... (1 Reply)
Discussion started by: filosophizer
1 Replies
7. AIX
Hello,
I have DS4000 IBM SAN Storage ( aka FastT Storage )
One of my disks has failed and I had a hot spare disk covering all the arrays. As the disk failed, immediately the hotspare disk took over the failed disk ( see the JPEG in the attachment )
My Question: How can I make the hotspare... (1 Reply)
Discussion started by: filosophizer
1 Replies
8. AIX
Has anyone tried SAN to SAN mirroring on IBM DS SAN Storage.
DS5020 mentions Enhanced Remote Mirror to multi-LUN applications
I wonder if Oracle High availibility can be setup using Remote Mirror option of SAN ? (1 Reply)
Discussion started by: filosophizer
1 Replies
9. AIX
Hi,
This is follow up to the post https://www.unix.com/aix/233361-san-disk-appearing-double-aix.html
When I connected Pseries Machine HBA Card ( Dual Port ) directly to the SAN Storage DS4300 , I was able to see Host Port Adapter WWN numbers , although I was getting this message... (2 Replies)
Discussion started by: filosophizer
2 Replies
LEARN ABOUT DEBIAN
timetrans
TIMETRANS(1p) User Contributed Perl Documentation TIMETRANS(1p)
NAME
timetrans - Converts time into time
SYNOPSIS
timetrans [units-options] [-count]
DESCRIPTION
timetrans converts time from one type of unit to another. If any of the units options are specified, then timetrans will convert those
time units into the number of seconds to which they add up. If given the count option, timetrans will convert that number of seconds into
the appropriate number of weeks, days, hours, minutes, and seconds. The converted result is printed out. Units options cannot be
specified in the same execution as the count option, and vice versa.
timetrans is intended for use with DNSSEC-Tools, for calculating a zone's expiration time.
OPTIONS
Units Options
The converted value of each unit is totaled and a single result printed.
-seconds seconds
Count of seconds to convert to seconds.
-minutes minutes
Count of minutes to convert to seconds.
-hours hours
Count of hours to convert to seconds.
-days days
Count of days to convert to seconds.
-weeks weeks
Count of weeks to convert to seconds.
Count Option
The specified seconds count is converted to the appropriate number of weeks, days, hours, minutes, and seconds.
-count seconds
Count of seconds to convert to the appropriate set of units.
Other Options
timetrans has the following miscellaneous options.
-Version
Displays the version information for timetrans and the DNSSEC-Tools package.
EXAMPLES
Example 1: Converting 5 days into seconds
$(42)> timetrans -days 5
432000
Example 2: Converting 2 weeks into seconds
$(43)> timetrans -w 2
1209600
Example 3: Converting 8 days and 8 hours into seconds
$(44)> timetrans -d 8 -hours 8
720000
Example 4: Converting 1 week, 1 day, and 8 hours into seconds
$(46)> timetrans -w 1 -days 1 -h 8
720000
Example 5: Converting 14 weeks, 4 days, 21 hours, 8 minutes, and 8 seconds into seconds
$(47)> timetrans -w 14 -d 4 -h 21 -m 8 -s 8
8888888
Example 6: Converting 720000 seconds into time units
$(48)> timetrans -c 720000
1 week, 1 day, 8 hours
Example 7: Converting 1814421 seconds into time units
$(49)> timetrans -c 1814421
3 weeks, 21 seconds
Example 8: Converting 8888888 seconds into time units
$(50)> timetrans -c 8888888
14 weeks, 4 days, 21 hours, 8 minutes, 8 seconds
COPYRIGHT
Copyright 2004-2012 SPARTA, Inc. All rights reserved. See the COPYING file included with the DNSSEC-Tools package for details.
AUTHOR
Wayne Morrison, tewok@tislabs.com
SEE ALSO
zonesigner(8)
Net::DNS::SEC::Tools::timetrans.pm(3)
perl v5.14.2 2012-06-21 TIMETRANS(1p)