Does ftp from unix have an exit status. In the sense after ftp is invoked and if the ftp fails during file transfer does it exit out with a status other than 0. What is do right now is invoke ftp and right it to a log and then grep for 'File Transferred Sucessfully'. Is this the only way to do it... (1 Reply)
I am trying to perform some error handing within a Korn sheel script whilst FTPing a file from one server to another..
The exit status is correctly set to zero, if my script connects to the other server and sends the file..
However, if for whatever reason other than a timeout the script... (3 Replies)
Hi,
I have tried with the following code;
if ;then
echo "Failure."
else
echo "Success."
fi
to test the exit status of the test.ksh shell script. But whatever is the exit status of the test.ksh shell script Failure. is always printed.
Please help.
regards,
Dipankar. (2 Replies)
Hi All,
I am using the following code to move files from one folder to another on the remote server:
ssh username@server <<EOF
cd source_dir
find . -type f -name "*.txt" |xargs -n1000 -i{} mv {} dest_dir
if
then send mail indicating error
otherwise
echo "success"
fi
EOF
... (1 Reply)
Hi All,
I am using the following code to move files from one folder to another on the remote server:
ssh username@server <<EOF
cd source_dir
find . -type f -name "*.txt" |xargs -n1000 -i{} mv {} dest_dir
if
then send mail indicating error
otherwise
echo "success"
fi
EOF
... (10 Replies)
ftp automation code is
ftp -v -n -i $host_name << EOF
user $u_name $u_pass
bi
mput $tar_file
bye
EOF
How to check whether the file is successfully transfered or not. Suppose the user name or password is provided wrongly then the code should track the error and ask the end user to enter... (2 Replies)
Is there a way in the following CShell code to have ftp give an exit status that can be retrieved to determine if it succeeded or failed?
ftp -n logxx.xxxx.xxx.xxx.com <<DO_FTP1
quote user $user_name
quote pass $password
ascii
put $js_file_name
bin
put $FinalZipFile
quit
DO_FTP1
... (1 Reply)
Hello All
My req is to store the exit status of a command in shell variable
I want to check whether the file has header or not
The header will contain the string
DATA_ACQ_CYC_CNTL_ID
So I am running the command
head -1 $i | grep DATA_ACQ_CYC_CNTL_ID
Now I have to check if... (6 Replies)
Hi all,
I have a shell script inside which i am executing another shell script. In the inner script im executing a command. i want the status of that command in the outer script to perform some validations.
How to get its status please help!!1
Im using ksh. (2 Replies)
I have a script named check which will read the content of a file and check wether those files exist in the current directory. If so it will have the exit status of 0, otherwise it will have 1.
check script:
#!/bin/bash
if ; then #Check there is enough command line parameters.
exit 1... (2 Replies)
Discussion started by: Ray Sun
2 Replies
LEARN ABOUT DEBIAN
rdup-tr
RDUP-TR(1) rdup RDUP-TR(1)NAME
rdup-tr - transform rdup output
SYNOPSIS
rdup-tr [OPTION]...
DESCRIPTION
Transform rdup output into something else. Where something else can be a tar, cpio, pax archive or another rdup stream.
The rdup archive must be given on rdup-tr's standard input.
You can select multiple types of output (-O flag), but you must be aware that you may loose some information in formats other than rdup's
own, see the table below.
You may also supply rdup-tr with only a list of pathnames, this can be selected with the -L flag.
The following table shows what happens with the output depending on the input.
0 OK
D delete information is lost
H hardlink information is lost
| |
output | tar,cpio,pax | rdup
input | |
------------- | ------------- | ------
rdup | D | 0
filelist | DH | H
| |
OPTIONS -L Select list input format. Normally rdup-tr accepts rdup output, with this option you can give it a list of path names. Note: with
list input rdup-tr will `stat()` each file.
-O Output format. This can be 'tar', 'cpio', 'pax' or 'rdup'. It defaults to 'rdup'.
-X key Read the encryption key from the file key and encrypt all paths with Blowfish and this key and iv. After the encryption the binary
data is converted into ASCII using an URL safe (Section 4 of RFC 3548) version of base64 encode.
The encryption key must be on the first line and the key size must be 16 and 8 bytes for the iv, so 24 in total.
-Y key Read the decryption key from the file key and decrypt all paths with Blowfish and this key. Before the encryption the paths are con-
verted to binary by using an URL safe version of base64 decode.
-c Force output to the tty. Normally rdup-tr wants to see it's output redirected.
-v Be more verbose.
-V Print rdup-tr's version.
-h A short help.
EXAMPLES
The following is possible
rdup -Pgzip -Pmcrypt,-f,KEY,-c /dev/null /home |
rdup-tr -O tar -X<(echo secret) | gzip >
my-home-zipped-crypted-pathcrypted-tar.gz
That is: all files under /home are gzipped and encrypted on a per file basis (first line). Further more, all pathnames are Blowfish
encrypted (second line) with the key 'secret'. This is put in a tar file, which is then compressed, resulting in the final output (final
line).
Creating a compressed and encrypted tar archive out of a full rdup dump might be done as follows
rdup -Pgzip -Pmcrypt,-f,KEY,-c /dev/null /home |
rdup-tr -O tar > my-home-zipped-and-crypted.tar
Or even pack and unpack it on the fly
rdup -Pgzip -Pmcrypt,-fKEY,-c /dev/null /home | rdup-tr -Otar |
ssh user@remotehost tar xvCf /tmp -
Or encryption with openssl
rdup -Popenssl,enc,-e,-des-cbc,-k,secret /dev/null /home
Or, compressing with gzip, encrypting with openssl and then compressing the entire archive yet again
rdup -Pgzip -Popenssl,enc,-e,-des-cbc,-k,secret /dev/null /home |
gzip > my_compressed_encrypted_rdup_archive.gz
Recreating the original rdup output, which can be fed to rdup-up.
gunzip -c my_compressed_encrypted_rdup_archive.gz |
rdup-tr -Popenssl,enc,-d,-des-cbc,-k,secret -Pgzip,-d >
my_rdup_archive
rdup-up < my_rdup_archive -t /tmp/restore
Notice the reversal of the -P options.
EXIT CODE
rdup-tr return a zero exit code on success, otherwise 1 is returned.
AUTHOR
Written by Miek Gieben.
REPORTING BUGS
Report bugs to <miek@miek.nl>.
SEE ALSO
http:/www.miek.nl/projects/rdup/ is the main site of rdup. Also see rdup(1), rdup-up(1) and rdup-backups(7).
COPYRIGHT
Copyright (C) 2005-2010 Miek Gieben. This is free software. There is NO warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR
PURPOSE.
Licensed under the GPL version 3. See the file LICENSE in the source distribution of rdup.
1.1.11 27 Nov 2008 RDUP-TR(1)