09-03-2009
i have used this method on old systems (386s and 486s) and can tell you it did work for me. obviously not all hardware is the same and chances are that this may cause issues on this particular system. but generally i would say that this does work on older systems where usually the problem is that booting from cd is not supported by the bios (like on somewhat newer systems booting from usb may not be supported whilst booting from cd is supported).
i do not know the minimum system requirements for puppy, but a guess is that he may be better off with something like dsl or deli linux since he's got severely outdated hardware. i've used dsl on an old machine with 500mhz cpu and 192mb ram. only using things like firefox and openoffice, etc. is really slow. however, since this machine has only 32mb of ram it's most likely not possible to use these applications anyway.
Last edited by Leppie; 09-03-2009 at 08:33 AM..
10 More Discussions You Might Find Interesting
1. Programming
Hi All
Following is the lines of code which simply makes a structure of 1 bit member and 7 bit is unused.Then the structure is initialised with char pointer.The output on HPUX(BIG Endian) and Compaq(Little Endian) are different.On HPUX it gives zero and Compaq it gives 1. I never thought that the... (7 Replies)
Discussion started by: Shobhit
7 Replies
2. Filesystems, Disks and Memory
Howto make Debian GNU/Linux install boot on a Compaq DeskPro XL 590 with Compaq SCSI diskdrive?
The problem is that Compaq's Scsi controller sems to be odd.
help please :) (0 Replies)
Discussion started by: Esaia
0 Replies
3. SCO
Trying to install Sco openserver on HP Proliant with this scsi controller but no scsi devices detected.
Boot controller is set as the smart array 532 but SCSI diags do not detect any SCSI boot devices during boot sequence
Any help appreciated (2 Replies)
Discussion started by: farmacy
2 Replies
4. UNIX for Dummies Questions & Answers
Hi,
I am new to UNIX. I need help in working with Compaq-UX TRU64 OS.
How It work FTP Server?
ANd MAil Server?
and I have apach pprogram project and it work as HTTP Server.
Also I need how can setup a new version of progrm on UNix like mozilla and adobe reader etc...........
Thank... (3 Replies)
Discussion started by: svuad
3 Replies
5. UNIX for Dummies Questions & Answers
I am trying to re-install this netwrok adapter on a server which has just had the motherboard replaced - so much for fault tolerant. I am running SCO Opensercer 5.0.7
Can anyone tell me the Bus no , device number etc that I need to configure this card?
Thanks in advance
Richard (3 Replies)
Discussion started by: farmacy
3 Replies
6. SCO
i want to install sco unix 5.0.5 on compaq presario laptop c773tu dual boot with windos xp.
the HDD is 160 GB
RAM 2046 MB ddr2.
I have created partitions and loaded Win XP
While installing SCO Unix 5.0.5 i get the following problem
1)memory excessively fragmented. I get around it by sepcifying... (0 Replies)
Discussion started by: vikramviky
0 Replies
7. SuSE
Any one try this. I am getting errors or it just hangs up. I have tried redhat, suse,ubuntu etc but nothing will load.
When i try to boot the live cd they boot up OK but then just hang after a while and the cd rom stop spinning etc.
Just wondering if anyone has use this hdw and what linux... (2 Replies)
Discussion started by: admaix
2 Replies
8. Windows & DOS: Issues & Discussions
Hi all,
Laptop compaq presario v3000 is not booting! It just gives 3 beeps and there is no display. All the green LEDs are glowing!
I have "performed a hard reset" as per HP site
Troubleshooting Black Screen Displays with No Error Messages During Startup or Boot Compaq Presario V3115AU... (7 Replies)
Discussion started by: ./hari.sh
7 Replies
9. HP-UX
Hello all,
I hope someone can help me.
We have Compaq Tru64 UNIX V5.1B (Rev. 2650).
By latest Belarus government act Europe/Minsk timezone was changed to
GMT+3 without DST (was GMT+2 with DST).
Please advice how to do changes on our machine.
Thank You in advance,
md1982 (15 Replies)
Discussion started by: md1982
15 Replies
10. Hardware
Hi gurus, I am experiencing strange networks problems. I am trying to teather internet from HTC Desire S with Android. Basicly I followed those instructions: https://wiki.archlinux.org/index.php/Android_Tethering#Procedure
1.) Enable USB Debugging - Phone: Settings --> Applications -->... (0 Replies)
Discussion started by: wakatana
0 Replies
LEARN ABOUT DEBIAN
fmscan
FM(1) General Commands Manual FM(1)
NAME
fmscan - scan FM band for radio stations
SYNOPSIS
fm [ -h ] [ -d device ] [ -t tuner ] [ -s freq ] [ -e freq ] [ -i freq ] [ -q ]
DESCRIPTION
fmscan is a program to scan a frequency band for radio stations, using the video4linux interface introduced in 2.1.x series Linux kernels.
It shows which ones have a accumulated signal strength of 50% or higher.
OPTIONS
-h Print a usage message to standard output, and exit.
-d device
Sets device as the device to tune. The default is /dev/radio0.
-t tuner
Sets tuner as the tuner on the selected device to adjust. The default is tuner 0. Most radio devices have only a single tuner.
-s freq
Starting frequency for scan, in MHz. Default: 87.9.
-e freq
Ending frequency for scan, in MHz. Default: 107.9.
-i freq
Increment between scanned channels, in MHz. Default: 0.2.
-t percent
Signal strength threshold to consider a channel. Default: 50%.
-q Quiet mode. Suppresses progress output.
BUGS
This process can take a while, and results vary greatly depending on the radio card in use. If your card's hardware cannot report signal
strength, it will not produce useful results.
This program may not do much if your radio card's driver doesn't support fine tuning in 1/16000 MHz offsets. By default, V4L2 assumes 1/16
MHz tuning units, which introduces evil rounding errors on many frequencies.
Supports only tuner 0 on any given device.
SEE ALSO
Additional documentation:
/usr/doc/fmtools/README
The fmtools homepage:
http://benpfaff.org/fmtools
AUTHORS
Russell Kroll <rkroll@exploits.org>, now maintained by Ben Pfaff <blp@cs.stanford.edu.>. This manpage written by Ben Pfaff.
fmscan 1.0.2 FM(1)