ExtUtils::MakeMaker::FAQ(3pm)				 Perl Programmers Reference Guide			     ExtUtils::MakeMaker::FAQ(3pm)

NAME

       ExtUtils::MakeMaker::FAQ - Frequently Asked Questions About MakeMaker

DESCRIPTION

       FAQs, tricks and tips for "ExtUtils::MakeMaker".

   Module Installation
       How do I install a module into my home directory?
	   If you're not the Perl administrator you probably don't have permission to install a module to its default location.  Then you should
	   install it for your own use into your home directory like so:

	       # Non-unix folks, replace ~ with /path/to/your/home/dir
	       perl Makefile.PL INSTALL_BASE=~

	   This will put modules into ~/lib/perl5, man pages into ~/man and programs into ~/bin.

	   To ensure your Perl programs can see these newly installed modules, set your "PERL5LIB" environment variable to ~/lib/perl5 or tell
	   each of your programs to look in that directory with the following:

	       use lib "$ENV{HOME}/lib/perl5";

	   or if $ENV{HOME} isn't set and you don't want to set it for some reason, do it the long way.

	       use lib "/path/to/your/home/dir/lib/perl5";

       How do I get MakeMaker and Module::Build to install to the same place?
	   Module::Build, as of 0.28, supports two ways to install to the same location as MakeMaker.

	   We highly recommend the install_base method, its the simplest and most closely approximates the expected behavior of an installation
	   prefix.

	   1) Use INSTALL_BASE / "--install_base"

	   MakeMaker (as of 6.31) and Module::Build (as of 0.28) both can install to the same locations using the "install_base" concept.  See
	   "INSTALL_BASE" in ExtUtils::MakeMaker for details.  To get MM and MB to install to the same location simply set INSTALL_BASE in MM and
	   "--install_base" in MB to the same location.

	       perl Makefile.PL INSTALL_BASE=/whatever
	       perl Build.PL	--install_base /whatever

	   This works most like other language's behavior when you specify a prefix.  We recommend this method.

	   2) Use PREFIX / "--prefix"

	   Module::Build 0.28 added support for "--prefix" which works like MakeMaker's PREFIX.

	       perl Makefile.PL PREFIX=/whatever
	       perl Build.PL	--prefix /whatever

	   We highly discourage this method.  It should only be used if you know what you're doing and specifically need the PREFIX behavior.  The
	   PREFIX algorithm is complicated and focused on matching the system installation.

       How do I keep from installing man pages?
	   Recent versions of MakeMaker will only install man pages on Unix-like operating systems.

	   For an individual module:

		   perl Makefile.PL INSTALLMAN1DIR=none INSTALLMAN3DIR=none

	   If you want to suppress man page installation for all modules you have to reconfigure Perl and tell it 'none' when it asks where to
	   install man pages.

       How do I use a module without installing it?
	   Two ways.  One is to build the module normally...

		   perl Makefile.PL
		   make
		   make test

	   ...and then set the PERL5LIB environment variable to point at the blib/lib and blib/arch directories.

	   The other is to install the module in a temporary location.

		   perl Makefile.PL INSTALL_BASE=~/tmp
		   make
		   make test
		   make install

	   And then set PERL5LIB to ~/tmp/lib/perl5.  This works well when you have multiple modules to work with.  It also ensures that the
	   module goes through its full installation process which may modify it.

       PREFIX vs INSTALL_BASE from Module::Build::Cookbook
	   The behavior of PREFIX is complicated and depends closely on how your Perl is configured. The resulting installation locations will
	   vary from machine to machine and even different installations of Perl on the same machine.  Because of this, its difficult to document
	   where prefix will place your modules.

	   In contrast, INSTALL_BASE has predictable, easy to explain installation locations.  Now that Module::Build and MakeMaker both have
	   INSTALL_BASE there is little reason to use PREFIX other than to preserve your existing installation locations. If you are starting a
	   fresh Perl installation we encourage you to use INSTALL_BASE. If you have an existing installation installed via PREFIX, consider
	   moving it to an installation structure matching INSTALL_BASE and using that instead.

   Common errors and problems
       "No rule to make target `/usr/lib/perl5/CORE/config.h', needed by `Makefile'"
	   Just what it says, you're missing that file.  MakeMaker uses it to determine if perl has been rebuilt since the Makefile was made.
	   It's a bit of a bug that it halts installation.

	   Some operating systems don't ship the CORE directory with their base perl install.  To solve the problem, you likely need to install a
	   perl development package such as perl-devel (CentOS, Fedora and other Redhat systems) or perl (Ubuntu and other Debian systems).

   Philosophy and History
       Why not just use <insert other build config tool here>?
	   Why did MakeMaker reinvent the build configuration wheel?  Why not just use autoconf or automake or ppm or Ant or ...

	   There are many reasons, but the major one is cross-platform compatibility.

	   Perl is one of the most ported pieces of software ever.  It works on operating systems I've never even heard of (see perlport for
	   details).  It needs a build tool that can work on all those platforms and with any wacky C compilers and linkers they might have.

	   No such build tool exists.  Even make itself has wildly different dialects.	So we have to build our own.

       What is Module::Build and how does it relate to MakeMaker?
	   Module::Build is a project by Ken Williams to supplant MakeMaker.  Its primary advantages are:

	   o	   pure perl.  no make, no shell commands

	   o	   easier to customize

	   o	   cleaner internals

	   o	   less cruft

	   Module::Build is the official heir apparent to MakeMaker and we encourage people to work on M::B rather than spending time adding
	   features to MakeMaker.

   Module Writing
       How do I keep my $VERSION up to date without resetting it manually?
	   Often you want to manually set the $VERSION in the main module distribution because this is the version that everybody sees on CPAN and
	   maybe you want to customize it a bit.  But for all the other modules in your dist, $VERSION is really just bookkeeping and all that's
	   important is it goes up every time the module is changed.  Doing this by hand is a pain and you often forget.

	   Simplest way to do it automatically is to use your version control system's revision number (you are using version control, right?).

	   In CVS, RCS and SVN you use $Revision$ (see the documentation of your version control system for details).  Every time the file is
	   checked in the $Revision$ will be updated, updating your $VERSION.

	   SVN uses a simple integer for $Revision$ so you can adapt it for your $VERSION like so:

	       ($VERSION) = q$Revision$ =~ /(d+)/;

	   In CVS and RCS version 1.9 is followed by 1.10.  Since CPAN compares version numbers numerically we use a sprintf() to convert 1.9 to
	   1.009 and 1.10 to 1.010 which compare properly.

	       $VERSION = sprintf "%d.%03d", q$Revision$ =~ /(d+).(d+)/g;

	   If branches are involved (ie. $Revision: 1.5.3.4$) it's a little more complicated.

	       # must be all on one line or MakeMaker will get confused.
	       $VERSION = do { my @r = (q$Revision$ =~ /d+/g); sprintf "%d."."%03d" x $#r, @r };

	   In SVN, $Revision$ should be the same for every file in the project so they would all have the same $VERSION.  CVS and RCS have a
	   different $Revision$ per file so each file will have a different $VERSION.  Distributed version control systems, such as SVK, may have
	   a different $Revision$ based on who checks out the file, leading to a different $VERSION on each machine!  Finally, some distributed
	   version control systems, such as darcs, have no concept of revision number at all.

       What's this META.yml thing and how did it get in my MANIFEST?!
	   META.yml is a module meta-data file pioneered by Module::Build and automatically generated as part of the 'distdir' target (and thus
	   'dist').  See "Module Meta-Data" in ExtUtils::MakeMaker.

	   To shut off its generation, pass the "NO_META" flag to "WriteMakefile()".

       How do I delete everything not in my MANIFEST?
	   Some folks are surprised that "make distclean" does not delete everything not listed in their MANIFEST (thus making a clean
	   distribution) but only tells them what they need to delete.	This is done because it is considered too dangerous.  While developing
	   your module you might write a new file, not add it to the MANIFEST, then run a "distclean" and be sad because your new work was
	   deleted.

	   If you really want to do this, you can use "ExtUtils::Manifest::manifind()" to read the MANIFEST and File::Find to delete the files.
	   But you have to be careful.	Here's a script to do that.  Use at your own risk.  Have fun blowing holes in your foot.

	       #!/usr/bin/perl -w

	       use strict;

	       use File::Spec;
	       use File::Find;
	       use ExtUtils::Manifest qw(maniread);

	       my %manifest = map  {( $_ => 1 )}
			      grep { File::Spec->canonpath($_) }
				   keys %{ maniread() };

	       if( !keys %manifest ) {
		   print "No files found in MANIFEST.  Stopping.
";
		   exit;
	       }

	       find({
		     wanted   => sub {
			 my $path = File::Spec->canonpath($_);

			 return unless -f $path;
			 return if exists $manifest{ $path };

			 print "unlink $path
";
			 unlink $path;
		     },
		     no_chdir => 1
		    },
		    "."
	       );

       Which tar should I use on Windows?
	   We recommend ptar from Archive::Tar not older than 1.66 with '-C' option.

       Which zip should I use on Windows for '[nd]make zipdist'?
	   We recommend InfoZIP: <http://www.info-zip.org/Zip.html>

   XS
       How do I prevent "object version X.XX does not match bootstrap parameter Y.YY" errors?
	   XS code is very sensitive to the module version number and will complain if the version number in your Perl module doesn't match.  If
	   you change your module's version # without rerunning Makefile.PL the old version number will remain in the Makefile, causing the XS
	   code to be built with the wrong number.

	   To avoid this, you can force the Makefile to be rebuilt whenever you change the module containing the version number by adding this to
	   your WriteMakefile() arguments.

	       depend => { '$(FIRST_MAKEFILE)' => '$(VERSION_FROM)' }

       How do I make two or more XS files coexist in the same directory?
	   Sometimes you need to have two and more XS files in the same package.  One way to go is to put them into separate directories, but
	   sometimes this is not the most suitable solution. The following technique allows you to put two (and more) XS files in the same
	   directory.

	   Let's assume that we have a package "Cool::Foo", which includes "Cool::Foo" and "Cool::Bar" modules each having a separate XS file.
	   First we use the following Makefile.PL:

	     use ExtUtils::MakeMaker;

	     WriteMakefile(
		 NAME		   => 'Cool::Foo',
		 VERSION_FROM	   => 'Foo.pm',
		 OBJECT 	     => q/$(O_FILES)/,
		 # ... other attrs ...
	     );

	   Notice the "OBJECT" attribute. MakeMaker generates the following variables in Makefile:

	     # Handy lists of source code files:
	     XS_FILES= Bar.xs 
		   Foo.xs
	     C_FILES = Bar.c 
		   Foo.c
	     O_FILES = Bar.o 
		   Foo.o

	   Therefore we can use the "O_FILES" variable to tell MakeMaker to use these objects into the shared library.

	   That's pretty much it. Now write Foo.pm and Foo.xs, Bar.pm and Bar.xs, where Foo.pm bootstraps the shared library and Bar.pm simply
	   loading Foo.pm.

	   The only issue left is to how to bootstrap Bar.xs. This is done from Foo.xs:

	     MODULE = Cool::Foo PACKAGE = Cool::Foo

	     BOOT:
	     # boot the second XS file
	     boot_Cool__Bar(aTHX_ cv);

	   If you have more than two files, this is the place where you should boot extra XS files from.

	   The following four files sum up all the details discussed so far.

	     Foo.pm:
	     -------
	     package Cool::Foo;

	     require DynaLoader;

	     our @ISA = qw(DynaLoader);
	     our $VERSION = '0.01';
	     bootstrap Cool::Foo $VERSION;

	     1;

	     Bar.pm:
	     -------
	     package Cool::Bar;

	     use Cool::Foo; # bootstraps Bar.xs

	     1;

	     Foo.xs:
	     -------
	     #include "EXTERN.h"
	     #include "perl.h"
	     #include "XSUB.h"

	     MODULE = Cool::Foo  PACKAGE = Cool::Foo

	     BOOT:
	     # boot the second XS file
	     boot_Cool__Bar(aTHX_ cv);

	     MODULE = Cool::Foo  PACKAGE = Cool::Foo  PREFIX = cool_foo_

	     void
	     cool_foo_perl_rules()

		 CODE:
		 fprintf(stderr, "Cool::Foo says: Perl Rules
");

	     Bar.xs:
	     -------
	     #include "EXTERN.h"
	     #include "perl.h"
	     #include "XSUB.h"

	     MODULE = Cool::Bar  PACKAGE = Cool::Bar PREFIX = cool_bar_

	     void
	     cool_bar_perl_rules()

		 CODE:
		 fprintf(stderr, "Cool::Bar says: Perl Rules
");

	   And of course a very basic test:

	     t/cool.t:
	     --------
	     use Test;
	     BEGIN { plan tests => 1 };
	     use Cool::Foo;
	     use Cool::Bar;
	     Cool::Foo::perl_rules();
	     Cool::Bar::perl_rules();
	     ok 1;

	   This tip has been brought to you by Nick Ing-Simmons and Stas Bekman.

PATCHING

       If you have a question you'd like to see added to the FAQ (whether or not you have the answer) please send it to makemaker@perl.org.

AUTHOR

       The denizens of makemaker@perl.org.

SEE ALSO

       ExtUtils::MakeMaker

perl v5.18.2							    2014-01-06					     ExtUtils::MakeMaker::FAQ(3pm)