Sponsored Content
Operating Systems Solaris Solaris 10 Speed and Duplex Settings: bge Post 302349308 by brialt1 on Monday 31st of August 2009 03:46:00 PM
Old 08-31-2009
Thanks for the quick reply, I will be sure to tag my code in the future.

My team does not have access to change the config on the switch (which is currently set to 100 full). In the mean time I have created a startup script in /etc/rc2.d/ to make the changes, though I would still like to know how to make it work with the conifg file.
 

10 More Discussions You Might Find Interesting

1. Solaris

Duplex Settings

Hi All I've been having a lot of errors logged on the Cisco Catalyst (4000 series) which one of my Solaris servers is patched into. I have a feeling they are duplex related, but I'm a bit stuck as to how to confirm that. How do I: 1. Check the duplex settings on my eri0 card? 2. Set the... (3 Replies)
Discussion started by: saabir
3 Replies

2. IP Networking

NIC speed 100M/full duplex problem

I have a TOSHIBA AS7000 B150 Sun Box I wanted to run it with 100M/full duplex I had added this to the /etc/system file to make to setting permenant So it would be set correctly on reboot. set eri:eri_adv_100fdx_cap=1 set eri:eri_adv_100hdx_cap=0 set eri:eri_adv_autoneg_cap=0 But when I... (4 Replies)
Discussion started by: AirWalker83
4 Replies

3. HP-UX

command to change duplex settings..

Hi Folks, I want the command to change the duplex settings of a HP-UX server. Thanks in advance. Sagar. (2 Replies)
Discussion started by: sag71155
2 Replies

4. Solaris

gigabit - fix speed/duplex on the switch ? or autoneg ?

Hi there We have a bit of a debate going here over what the prefered method is for setting 1000/Full on e1000g or nge interfaces is. As you aware the Solaris configration files for nge and e1000g dont allow you to "fix" 1000/Full but instead allow you to set auto-negotiate to ON but only... (1 Reply)
Discussion started by: hcclnoodles
1 Replies

5. UNIX for Advanced & Expert Users

How to set full duplex for solaris 5.5

I would like to change half duplex to full duplex on solaris 5.5. I tried with below commands but they didnt work on solaris 5.5. #ndd -set /dev/le adv_100fdx_cap 1 (6 Replies)
Discussion started by: csreenivas
6 Replies

6. Infrastructure Monitoring

How to find the duplex speed on Windows

Hi, In UNIX, it's very easy to find the duplex speed. But in Windows, is there a easy way to find the duplex speed? I can't go to over 100 servers to find this out, I was wondering if I run one command to do this? Please advice. (2 Replies)
Discussion started by: samnyc
2 Replies

7. Solaris

How to find half duplex or full duplex

Hi, How to find whether the server is running with half duplex or full duplex. I tried with the following command ndd -get /dev/ but am not getting any output,. Is the command correct? Also let me know how to change from half to full duplex. (1 Reply)
Discussion started by: rogerben
1 Replies

8. AIX

How to change Speed Duplex

How to change Speed Duplex ! How to change Speed Duplex by command chdev -P -l ent1 -a media_speed=1000_Full_Duplex How to change Speed Duplex by Smitty . smitty chgenet -> select adapter -> change Media speed etc. -> set "Apply change to DATABASE only" to yes -> Enter -> ... (0 Replies)
Discussion started by: ITHelper
0 Replies

9. AIX

Connected and Running with half duplex speed

VIO Server connected to switch port and running with half duplex speed on one of the shared ethernet adapter. We have verified at switch end and everythings looks good. Other ethernet adapter in the VIO server are connected and running in Full duplex speed. Please help me find why this shared... (4 Replies)
Discussion started by: mugunthanvh
4 Replies

10. Shell Programming and Scripting

Need script help for monitoring duplex settings

So I have a server I am trying to set up a script to send a Wall message notifying of my eth0 nic being set to 100 half duplex instead of 100 full duplex. I know I am trying to read from /etc/sysconfig/network/ifcfg-eth0 to pull the parameters STARTMODE=onboot BOOTPROTO=static... (6 Replies)
Discussion started by: lutador72
6 Replies
updaters(1M)															      updaters(1M)

NAME
updaters - configuration file for NIS updating SYNOPSIS
Remarks The Network Information Service (NIS) was formerly known as Yellow Pages (YP). The functionality of the two remains the same; only the name has changed. DESCRIPTION
is a makefile used for updating the Network Information Service (NIS) databases. Databases can be updated only if the network is secure, that is, only if there is a NIS database ( The default script will update only the map. An entry in the file is a make target for a particular NIS database. For example, if you wanted to add to this script, you would create a make target named passwd.byname with the command to update that database. See udpublickey(1M). The information necessary to make the update is passed to the update command through standard input. The information passed is described below. All items are followed by a NEW LINE except for Actual bytes of key and Actual bytes of data. Network name of client wishing to make the update (a string) Kind of update (an integer) Number of bytes in key (an integer) Actual bytes of key Number of bytes in data (an integer) Actual bytes of data After receiving this information through standard input, the command to update the particular database should decide whether the user is allowed to make the requested change. If not, the command should exit with the status If the user is allowed to make the change, the command should make the change and exit with a status of zero. If there are any errors that may prevent the updater from making the change, it should exit with the status that matches a valid NIS error code described in AUTHOR
was developed by Sun Microsystems, Inc. SEE ALSO
make(1), newkey(1M), rpc.ypupdated(1M), udpublickey(1M), publickey(4). updaters(1M)
All times are GMT -4. The time now is 08:09 PM.
Unix & Linux Forums Content Copyright 1993-2022. All Rights Reserved.
Privacy Policy