Can someone tell me if I tweak the destination field in an arp request for TCP connection to match it with the the mac addresses of different recivers in an ethernet as the packet passes through them in short each one catches the arp request and replies, what would happen I mean will the sender of... (2 Replies)
Dear all,
We are testing two of our servers for mq series connectivity. The scenario is, when one machine is shutting down it's services there are some scripts that do a dns update, which removes the ip address and relates it to the ip address of the other node on our dns server, and the update... (7 Replies)
Does ARP Request packet Contains MAC Address of dest during broadcast?
I found It So...
When i captured ARP Req Pkts on ethereal...
Rgds
-Meti (1 Reply)
I was checking nettl output for a unstable telnet to my server. this is part of output:
###
***********************************STREAMS/UX*******************************@#%
Timestamp : Sun Jun 22 EETDST 2008 22:14:47.492899
Process ID : Subsystem ... (4 Replies)
About a week ago a customer hooked up a wireless router backwards to our network, causing it to serve incorrect DHCP addresses to some of them. Our networks are mostly statically assigned so this didn't cause as much damage as it might have, but now, over a week later, I still have incomplete... (1 Reply)
Man page of netlink says:
---------------------------------
NETLINK_ARPD
For managing the arp table in user space.
----------------------------------
Is it possible to monitor arp table using Netlink? or it's just for manipulating? (1 Reply)
Can someone please explain this output to me. Why doesn't ifconfig show the same info?
~ $ arp -a
? (10.71.0.1) at 00:1b:21:2b:eb:0c on eth0 (4 Replies)
Hello,
I have 2 clients with Unix installed.
host1: eth0 (192.168.5.10) & eth1 (192.168.10.10)
host2: eth0 (192.168.10.20)
I've connected host1-eth1 to host2-eth0. host1-eth0 isn't connected.
I started 'tcpdump' on wonder that host2 got ARP requests for 192.168.5.10.
Any idea why host1... (2 Replies)
A customer appears to have drastically misunderstood our instructions for connecting to our WAN. He set his PC IP address to the same as one of the bridges. :mad: :wall: This caused much confusion on the network, to put it mildly. He called to complain about the poor performance of the network... (13 Replies)
Discussion started by: Corona688
13 Replies
LEARN ABOUT SUSE
ifndp-proxy
IFNDP-PROXY(5) Network configuration IFNDP-PROXY(5)NAME
ifndp-proxy[-<interface name>] - IPv6 NDP and IPv4 ARP proxy entries
SYNOPSIS
/etc/sysconfig/network/ifndp-proxy
/etc/sysconfig/network/ifndp-proxy-<interface name>
DESCRIPTION
These files contain IPv6 NDP and IPv4 ARP proxy settings, that should be applied using the ip neigh add proxy command documented in the
ip(8) manual page that provides a common interface for IPv4 and IPv6.
The NDP/ARP proxy is required, e.g. when IP addresses from the same subnet have to be used on the interface of the host as well as on
interfaces behind a (tunnel) interface and using a bridge is not an option.
Don't forget to enable forwarding and the NDP/ARP proxy by setting
net.ipv6.conf.<all|default|interface name>.proxy_ndp = 1
net.ipv6.conf.<all|default|interface name>.forwarding = 1
and/or
net.ipv4.conf.<all|default|interface name>.proxy_arp = 1
net.ipv4.conf.<all|default|interface name>.forwarding = 1
or
net.ipv4.ip_forward = 1
either as global all setting in the /etc/sysctl.conf file or using the ifsysctl(5) files, that allow per-interface setup.
Forwarding can be also enabled in the /etc/sysconfig/sysctl file using the IP_FORWARD and IPV6_FORWARD variables.
The proxy entries are added and deleted using the if-{up|down}.d/ndp-proxy script, every time after an involved interface has been set
up or down.
SYNTAX
The format of the ifndp-proxy file is:
<address> <address interface> <proxy interface list>
The format of the ifndp-proxy-<address interface> file is same to above, but allows also to omit the address interface by using a "-" as
placeholder inside of the file, because it is already available in the file name:
<address> <address interface | -> <proxy interface list>
Lines beginning with # and blank lines are ignored.
Each line defines to add a proxy NDP/ARP entry with the address of or behind address interface to all interfaces in the proxy interface
list.
EXAMPLES
Let's assume, your machine is connected via eth0 to a switch with the networks 2001:db8:abba::/64 and 192.168.100.1/24 and is using the IP
address 1 itself. You'd like to use the addresses 11 and 12 e.g. for virtual machines behind the tap1 and tap2 interface, that is:
2001:db8:abba::1/64 -- local eth0 address
2001:db8:abba::11/64 -- address behind tap1
2001:db8:abba::12/64 -- address behind tap2
192.168.100.1/24 -- local eth0 address
192.168.100.11/24 -- address behind tap1
192.168.100.12/24 -- address behind tap2
then set up the following entries in the ifndp-proxy file:
2001:db8:abba::1 eth0 tap1 tap2
2001:db8:abba::11 tap1 eth0 tap2
2001:db8:abba::12 tap2 eth0 tap1
192.168.100.1 eth0 tap1 tap2
192.168.100.11 tap1 eth0 tap2
192.168.100.12 tap2 eth0 tap1
additionally to the routing entries in the routes or ifroute-<interface name> files.
BUGS
Please report bugs at <https://bugzilla.novell.com/>
AUTHOR
Marius Tomaschewski <mt@suse.de>
SEE ALSO ifup(8)ifcfg(5)ifsysctl(8)sysconfig December 2009 IFNDP-PROXY(5)