08-23-2009
To keep the forums high quality for all users, please take the time to format your posts correctly.
First of all, use Code Tags when you post any code or data samples so others can easily read your code. You can easily do this by highlighting your code and then clicking on the # in the editing menu. (You can also type code tags [code] and [/code] by hand.)
Second, avoid adding color or different fonts and font size to your posts. Selective use of color to highlight a single word or phrase can be useful at times, but using color, in general, makes the forums harder to read, especially bright colors like red.
Third, be careful when you cut-and-paste, edit any odd characters and make sure all links are working property.
Thank You.
The UNIX and Linux Forums
---------- Post updated at 12:53 ---------- Previous update was at 12:50 ----------
what is your intention for cloning? why not use a raid1 configuration?
if you just want to copy the whole disk, use slice 2 for you operation... i've done this only on sparc systems (which have another disk layout), so i don't know if this works on x86 systems. but i think so...
10 More Discussions You Might Find Interesting
1. SCO
Hello everybody,
:confused:
I have to change the system disk on an old PC running SCO 5.0.5.
The disk is up and running, this is a preventive action.
My experience on UNIX is very limited and I look for the easyest solution to clone this unit.
Is it possible with commands or through a clone... (2 Replies)
Discussion started by: mhachez
2 Replies
2. AIX
Hi everyone,
I want to clone a AIX 5.2 system from a machine to another one.
So i modified bosinst.data and image.data files (according to future platform) before making mksysb on old platform.
After booting on CD and restoring system using mksysb tape, the installation is launched but ever... (2 Replies)
Discussion started by: fgaulois
2 Replies
3. HP-UX
hello,
Anybody that has already running script or command that can disk clone the hpux machine
thanks (2 Replies)
Discussion started by: eykyn17
2 Replies
4. Solaris
I am using ufsdump and ufsrestore to clone the root disk on one of my servers. I would like to automate this as much as possible, but have run into a problem where it prompts for changing the owner/mode when it is complete.
Any ideas for running this in the background and not being prompted?
... (4 Replies)
Discussion started by: patricko0317
4 Replies
5. Filesystems, Disks and Memory
Hi,
I'm running Ubuntu on my laptop. To keep my data safe and easy disaster recovery as well I bought similar HDD to one installed in my laptop with higher capacity and using USB box I'm doing disk clone to it. So at any time I can replace disk and carry on with my work as before.
I'm trying... (2 Replies)
Discussion started by: uvaio
2 Replies
6. Solaris
Hi All,
We had a Sun Netra T1 go down the other day, the root disk was mirrored using vxvm. Upon boot from either disk, we had the following error appear:
WARNING: Error writing ufs log state
WARNING: ufs log for / changed state to Error
WARNING: Please umount(1M) / and run... (4 Replies)
Discussion started by: badoshi
4 Replies
7. Ubuntu
I am using 'dd' to clone an entire hard drive which only has Ubuntu 11.10 and some data with no special options. The disks are both 1Tb, However, I did re-partition the target disk with gparted successfully. The new partions are not the same size as the source disk. When starting 'dd' no partitions... (24 Replies)
Discussion started by: Royalist
24 Replies
8. Linux
Dear All
I needed to clone my disk to another hard drive . I did it as the following :
#dd if=/dev/sdb of=/dev/sdc
But after a while, the procedure ended with the "writing to /dev/sdc
input/output error" message.
Can you please let me know how can I overcome this as the fdisk now returns as "... (1 Reply)
Discussion started by: hadimotamedi
1 Replies
9. Solaris
Hi Solaris 10 Experts,
I am wondering what is the correct syntax to edit in Grub when trying to specify the local ZFS boot disk while booting up from a Solaris 10 x86 64bits DVD installation disk. In other word, I try to boot up from local disk without removing the Solaris installation disk... (0 Replies)
Discussion started by: gjackson123
0 Replies
10. Solaris
Hi,
I'm looking to copy a boot disk on an old Solaris 8 system using dd. I'll bring the system down to single user mode and begin from there. I'm copying my source disk to a larger target disk. Do I need to do anything other than the 'dd' command below because the target disk is bigger? ... (2 Replies)
Discussion started by: sparcman
2 Replies
LEARN ABOUT X11R4
installgrub
installgrub(1M) installgrub(1M)
NAME
installgrub - install GRUB in a disk partition or a floppy
SYNOPSIS
/sbin/installgrub [-fm] stage1 stage2 raw-device
The installgrub command is an -only program. GRUB stands for GRand Unified Bootloader.
installgrub installs GRUB stage 1 and stage 2 files on the boot area of a disk partition. If you specify the -m option, installgrub
installs the stage 1 file on the master boot sector of the disk.
The installgrub command accepts the following options:
-f
Suppresses interaction when overwriting the master boot sector.
-m
Installs GRUB stage1 on the master boot sector interactively.
The installgrub command accepts the following operands:
stage1
The name of the GRUB stage 1 file.
stage2
The name of the GRUB stage 2 file.
raw-device
The name of the device onto which GRUB code is to be installed. It must be a character device that is readable and writable. For disk
devices, specify the slice where the GRUB menu file is located. (For Solaris it is the root slice.) For a floppy disk, it is
/dev/rdiskette.
Example 1: Installing GRUB on a Hard Disk Slice
The following command installs GRUB on a system where the root slice is c0d0s0:
example# /sbin/installgrub /boot/grub/stage1
/boot/grub/stage2 /dev/rdsk/c0d0s0
Example 2: Installing GRUB on a Floppy
The following command installs GRUB on a formatted floppy:
example# mount -F pcfs /dev/diskette /mnt
# mkdir -p /mnt/boot/grub
# cp /boot/grub/* /mnt/boot/grub
# umount /mnt
# cd /boot/grub
# /sbin/installgrub stage1 stage2 /dev/rdiskette
/boot/grub
Directory where GRUB files reside.
See attributes(5) for descriptions of the following attributes:
+-----------------------------+-----------------------------+
| ATTRIBUTE TYPE | ATTRIBUTE VALUE |
+-----------------------------+-----------------------------+
|Availability |SUNWcsu |
+-----------------------------+-----------------------------+
|Interface Stability |Evolving |
+-----------------------------+-----------------------------+
boot(1M), fdisk(1M), fmthard(1M), kernel(1M), attributes(5)
Installing GRUB on the master boot sector (-m option) overrides any boot manager currently installed on the machine. The system will always
boot the GRUB in the Solaris partition regardless of which fdisk partition is active.
24 May 2005 installgrub(1M)