08-22-2009
I've installed Debian Lenny on a 800mhz Duron with 160mb RAM and 500mb swap. With Enlightenment as the window manager using Firefox with several tabs open and running some other applications at the same time, RAM usage hardly ever touches 100mb and swap usage can be neglected (less than 10%). After boot with Enlightenment up and running, memory usage is under 40mb. Of course, if you start every daemon at boot and running several memory hungry applications (like firefox, open office, etc.) you may experience poor performance.
I don't know what kind of mySQL development you are planning to do, but my guess is that you should be ok for most development purposes. If your system is getting sluggish I suggest you get more RAM.
Hope this helps
Last edited by Leppie; 08-22-2009 at 08:00 PM..
10 More Discussions You Might Find Interesting
1. UNIX for Dummies Questions & Answers
first of all, sorry about my english...I´m a spanish newbie to this marvelous OS and i have just a couple of doubts...u know? :-)
1) how big should my swap partition be if i installed debian 2.2r3 or FreeBSD 4.x on a AMD k7 1400Mhz with 512Mb of Random Access Memory?
i heard that those OS... (1 Reply)
Discussion started by: I[X]ION
1 Replies
2. UNIX for Dummies Questions & Answers
How big do I set the swap partition when i'm setting up my hard drive to install RedHat. (Using Partition Magic)
thanks!
primal (2 Replies)
Discussion started by: primal
2 Replies
3. UNIX for Dummies Questions & Answers
Hy all,
i've a little problem with the size of the swap. I've an old solaris machine, with 4Go, and swap is taking 500Mo for only 1% used at any time.
So : how can i change this size without problems ?????
(ok it may be a stupid question, but it's a real problem when you lose about 1 or 2... (3 Replies)
Discussion started by: Olivier
3 Replies
4. UNIX for Dummies Questions & Answers
I run a dual boot WinXP/Red Hat 8 system on my laptop. Since my hard drive is inherently small(laptop) I am trying to creat a swap partition for keeping mutually used files such as music/video etc... I have created a 2.5GB Fat32 partition with Partition Magic Pro and have windows recognizing the... (2 Replies)
Discussion started by: djtrippin
2 Replies
5. Linux
What does a swap partition do exactly? I was messing arround with a linux machine at my school and i deleted the swap partition using fdisk and then rebooted the machine and it worked fine and wrote a swap partition back in...lol. Is it a nessary part of the OS to use that partition? (7 Replies)
Discussion started by: byblyk
7 Replies
6. Linux
Dear Folks
Is there anyway to give a UUID to a swap partition? mkswap on CentOS 5 (util-linux-2.13-0.45.el5_1.1) appears to override this option ;-(
# swapoff -a
# mkswap -L swap1 /dev/sda3
Setting up swapspace version 1, size = 4293591 kB
LABEL=swap1, no uuid
And there's no... (3 Replies)
Discussion started by: Santi
3 Replies
7. Solaris
Dear All
Anyone can help me what is the problem of swap partition? swap partition is showing mounted in df -h command output.
Regards
prakash (1 Reply)
Discussion started by: pshelke
1 Replies
8. Filesystems, Disks and Memory
Hi,
running mount, I get the following, no part1 swap
as part1 swap has been created
and is listed below.
System works fine anyway.
As I cannot unmount part1, what is a standard procedure to make part1 on.
Jack
=============
..
$ free
total used free shared buffers cached
Mem:... (2 Replies)
Discussion started by: jack2
2 Replies
9. HP-UX
Hey Guys.
Let show our disk-mapping structure on HP-UX B11.11
with df :
# df
/home (/dev/vg00/lvol5 ): 18979652 blocks 1224395 i
/opt (/dev/vg00/lvol4 ): 120276192 blocks 1894100 i
/var (/dev/vg00/lvol6 ): 19380328 blocks ... (3 Replies)
Discussion started by: aggadtech08
3 Replies
10. Solaris
Hi,
the /tmp size is less whereas the size allocated to swap is quite big. how to increase the size of /tmp -
#: swap -l
swapfile dev swaplo blocks free
/dev/md/dsk/d20 85,20 8 273096 273096
#: swap -s
total: 46875128k bytes allocated + 2347188k reserved =... (2 Replies)
Discussion started by: psb74
2 Replies
LEARN ABOUT HPUX
remote_nfs_swap
remote_nfs_swap(5) File Formats Manual remote_nfs_swap(5)
NAME
remote_nfs_swap - enable swapping across NFS
VALUES
Default
Allowed values
DESCRIPTION
This tunable controls adding a NFS filesystem for use as swap. If is set to only local filesystems and devices can be used for swap. If
it is set to both local and networked file systems can be used for swap.
Historically, this tunable was used in NFS clusters that are no longer supported, but this capability has not yet been removed.
Who Is Expected to Change This Tunable?
Anyone.
Restrictions on Changing
Changes to this tunable take effect on the next boot.
When Should the Tunable Be Turned On?
Almost never. As previously mentioned, this tunable was designed for systems which are not in use today. Only systems with extremely
robust NFS capabilities should even consider using NFS for swap.
What Are the Side Effects of Turning the Tunable On?
If the value is set to and a NFS partition is added as swap, then some kernel memory will be set aside for NFS transactions to the swap
file system. The kernel will then use the NFS swap partition just the same as a local file system. If the NFS capabilities of the system
are not robust, this could lead to extremely long swap times (both swap in and swap out), and possibly a loss of memory because all the
reserved memory and more could be used by NFS (just when memory pressure is high) causing the need for swap.
When Should the Tunable Be Turned Off?
Unless you are positive that the NFS system can handle the load of being used as swap, and does not have a local file system or disk drive
to spare, this tunable should be set to
What Are the Side Effects of Turning the Tunable Off?
Any previously defined NFS swap filesystems will no longer be allowed. Kernel memory will not be reserved for NFS transactions due to
swap.
What Other Tunables Should Be Changed at the Same Time?
None.
WARNINGS
All HP-UX kernel tunable parameters are release specific. This parameter may be removed or have its meaning changed in future releases of
HP-UX.
Installation of optional kernel software, from HP or other vendors, may cause changes to tunable parameter values. After installation,
some tunable parameters may no longer be at the default or recommended values. For information about the effects of installation on tun-
able values, consult the documentation for the kernel software being installed. For information about optional kernel software that was
factory installed on your system, see at
AUTHOR
was developed by HP.
Tunable Kernel Parameters remote_nfs_swap(5)