Can I Install the Gani Network Driver Using the Application that Came on the CD? Post: 302345265

10 More Discussions You Might Find Interesting

1. Programming

Network device driver

HI, I am writing a network device driver for RTL8139c card on 2.6.18 kernel ... I am facing few queries listed below 1. Can i able to at all write a driver for RTL8139C or Realtek had designed new chip for 2.6 series kernel? 2. If no then which driver file 2.6.18 uses .. Is it 8139too.c or...

2. SCO

Need to create megasas driver floppy for new install

I have a new Dell PowerEdge 2900 with perc5/i and no os. I need to install SCO Openserver 6 and I need create a megasas BTLD floppy in order to install the os. http://ftp.sco.com/pub/unixware7/714/drivers/megasas_1.1/README.hba.megasas.1.1.txt According to the link, I need to download the...

3. Solaris

network driver cpu usage

Hello all, Needed a suggestion from you all, if you know anything about this stuff. We have a high network traffic application. Close to around 700Meg /sec on one NIC. When the traffic is around 200Meg on the NIC, the VCPU(not the CPU, cause we have 24 VCPU) utilization by the NIC driver...

4. Solaris

Tape Driver Install

Hi , How to check the drivers of a dat tape? And once downloaded how to install drivers for the same?? Where to download drivers from? Having some trouble with Dat tape drive configuration..

5. Solaris

Installing Network on Computer, might be driver

Hi All, Just completing my second Solaris installation, in the previous one which was on a Dell X64 machine, I went through the Network configuration setting, on the current computer which I am installing Solaris on, its a custom built machine and for some reason, I didnt see the screen where I...

6. Red Hat

How to know whether the network driver alredy installed in my system

I am using NVIDIA nforce: Networking controllers And Redhat enterprice linux ws version 4 32 bit: OS I want to connect my system to Broadband internet using linux. From where can I download the driver for nertwork. How to know whether the network driver alredy installed in my system. ...

7. Solaris

Gani Network Driver Won't Install - make: Fatal error: Don't know how to make targ...

I attached a README file that I will refer to. I successfully completed everything in the README file until step 4. # pwd /gani/gani-2.4.4 # ls COPYING Makefile.macros gem.c Makefile Makefile.sparc_gcc gem.h Makefile.amd64_gcc ...

8. UNIX for Dummies Questions & Answers

Simulated driver for Network Interface Adapter

Hi all, I got sort of a task to do. I have to write in C "simulated network driver". What does it mean? - It has to run on all network adapters - It has to be as simple as it can be - It has to run on all linux distributions (or at least most of them) - It does not have to run a network...

9. Programming

The simplest network driver

Hi, I am trying to write the simplest network driver that would send whatever through cable. My configuration is: Linux machine with some Intel network adapter Another machine with WireShark I connected Intel network adapter to second machine and want anything to pop up at wireshark. ...

10. UNIX for Dummies Questions & Answers

Driver Install Script

Hi, I am faily new to linux and bash scripting. But essentially what I am trying to do is create a small bash script that will automatically install a driver I want. I can do it manually but I want to create a script so I won't forget, since it is an internet driver I won't be able to get help when...

LEARN ABOUT REDHAT

gdm-restart

gdm-restart(1m)                                                    User Commands                                                   gdm-restart(1m)

NAME

       gdm-restart, gdm-safe-restart, gdm-stop - stop or restart GDM

SYNOPSIS

       gdm-restart

       gdm-safe-restart

       gdm-stop

DESCRIPTION

       gdm-restart stops and restarts GDM by sending a HUP signal to the GDM daemon. This command immediately terminates all sessions and logs out
       users currently logged in with GDM.

       gdm-safe-restart stops and restarts GDM by sending a USR1 signal to the GDM daemon. GDM is restarted as soon as all users log out.

       gdm-stop stops GDM by sending a TERM signal to the GDM daemon.

FILES

       The following files are used by this application:

       /usr/bin/gdm-restart    Executable to stop and restart GDM

       /usr/bin/gdm-safe-restarExecutable to stop and restart GDM safely

       /usr/bin/stop           Executable to stop GDM

ATTRIBUTES

       See attributes(5) for descriptions of the following attributes:

       +-----------------------------+-----------------------------+
       |      ATTRIBUTE TYPE         |      ATTRIBUTE VALUE        |
       +-----------------------------+-----------------------------+
       |Availability                 |SUNWgnome-display-mgr        |
       +-----------------------------+-----------------------------+
       |Interface stability          |External                     |
       +-----------------------------+-----------------------------+

SEE ALSO

       Latest version of the GNOME Desktop User Guide for your platform.

       gdm(1), gdmXnestchooser(1), gdmflexiserver(1), gdmphotosetup(1), gdmsetup(1), gdmthemetester(1), gdmconfig(1m)

NOTES

       Written by Brian Cameron, Sun Microsystems Inc., 2004.

SunOS 5.10                                                          1 Sep 2004                                                     gdm-restart(1m)