AMRCTL(8)						    BSD System Manager's Manual 						 AMRCTL(8)

NAME

     amrctl -- Control utility for AMI MegaRaid controllers

SYNOPSIS

     amrctl stat [-bgv] [-a attempts] [-f device] [-l volno] [-p driveno] [-s busno] [-s busno:driveno] [-t microseconds]

DESCRIPTION

     The amrctl queries or controls AMI MegaRaid controllers supported by the amr(4) driver.

     Only the stat subcommand is currently implemented, and reports status of the controller.  The options for the stat subcommand are as follows:

	   -a attempts	Number of retries for a command before giving up.  Default 5.

	   -b		Report battery status.

	   -f device	Device to use.	Default to /dev/amr0.

	   -g		Report global paramters for the controller.

	   -l volno	Report status of a logical drive.

	   -p driveno	Report status of a physical drive.

	   -s busno	Report status of all physical drives on the specified bus.

	   -s busno:driveno
			Report status of the specified physical drive on the specified bus.

	   -t microseconds
			Delay between retries for a command.

	   -v		Increase verbosity level by one.

SEE ALSO

     amr(4)

HISTORY

     The amrctl command first appeared in NetBSD 4.0.

AUTHORS

     The amrctl command was written by Pierre David <Pierre.David@crc.u-strasbg.fr> and
     Jung-uk Kim <jkim@FreeBSD.org> for FreeBSD.

BSD
								   July 22, 2006							       BSD