Hi guy,
I have a problem to pass a variable containing '*' value to FIND command.
below is the script. It doesn't work by submit below command:
rmf.sh name '*.txt'
or
rmf.sh name *.txt
I've tried either optn="-name '$2'" or optn="-name $2"., and there is no luck.
### (script... (5 Replies)
Dear friends,
please tell me how to find the files which are existing in the current directory, but it sholud not search in the sub directories..
it is like this,
current directory contains
file1, file2, file3, dir1, dir2
and dir1 conatins
file4, file5
and dir2 contains
file6,... (9 Replies)
Hi All,
I need to store the real seconds of the following command in a variable. How could it be done?
time $(dd if=/dev/zero of=/dev/sda1 bs=512 count=2048;sync)
Thanks,
Amio (12 Replies)
Hello All
Nice to meet you all here in this forum,
it's my 1rst time here
i'm asking about a little issue that i face
i added a ksh script that echo " please insert your name " and store the output to a login.log file.
the script is working fine with normal telnet
but Xstart is not working... (8 Replies)
Hi,
I'm new here. I was wondering why I can't store a host lookup in a variable.
for line in $(< blacklist)
do
STOREIP=host $line;
if ]; then
$line >> blacklist2;
else
$line >> blacklist3;
fi
done
Result: "ip" command not found .. so how would I store the host lookup in the... (2 Replies)
Hi all,
I am new to Linux/shell scripting having moderate knowledge.
In my script, I need to get execution time of a command (say 'ls') in mili seconds level. For this i tried using "time" command to retrieve the total execution time in milli seconds. But, the problem is that, how to save... (9 Replies)
Hi,
I have line in input file as below:
3G_CENTRAL;INDONESIA_(M)_TELKOMSEL;SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL
My expected output for line in the file must be :
"1-Radon1-cMOC_deg"|"LDIndex"|"3G_CENTRAL|INDONESIA_(M)_TELKOMSEL"|LAST|"SPECIAL_WORLD_GRP_7_FA_2_TELKOMSEL"
Can someone... (7 Replies)
Hi All,
I need to get the version of python installed and store it in a variable for later use. Whereas it is printing on the console instead of storing to variable. I am able to store output of ls command in a variable. Please check the below code :
root@myhost:/volumes/srini# cat... (4 Replies)
I'm trying to find out what happened to the rogue game that apt-get told me it installed, so I thought I would find the file. I went to the root and entered:
find -name "rog*.*"
I get a large number of lines saying my access is denied in various directories. I figure I'll practice my Unix... (14 Replies)
Discussion started by: arghvark
14 Replies
LEARN ABOUT SUSE
sane-find-scanner
sane-find-scanner(1) SANE Scanner Access Now Easy sane-find-scanner(1)NAME
sane-find-scanner - find SCSI and USB scanners and their device files
SYNOPSIS
sane-find-scanner [-h|-?] [-v] [-q] [-p] [-f] [-F filename] [devname]
DESCRIPTION
sane-find-scanner is a command-line tool to find SCSI and USB scanners and determine their Unix device files. Its primary aim is to make
sure that scanners can be detected by SANE backends.
For SCSI scanners, it checks the default generic SCSI device files (e.g., /dev/sg0) and /dev/scanner. The test is done by sending a SCSI
inquiry command and looking for a device type of "scanner" or "processor" (some old HP scanners seem to send "processor"). So
sane-find-scanner will find any SCSI scanner connected to those default device files even if it isn't supported by any SANE backend.
For USB scanners, first the USB kernel scanner device files (e.g. /dev/usb/scanner0), /dev/usb/scanner, and /dev/usbscanner) are tested.
The files are opened and the vendor and device ids are determined, if the operating system supports this feature. Currently USB scanners
are only found this way if they are supported by the Linux scanner module or the FreeBSD or OpenBSD uscanner driver. After that test,
sane-find-scanner tries to scan for USB devices found by the USB library libusb (if available). There is no special USB class for scanners,
so the heuristics used to distinguish scanners from other USB devices is not perfect. sane-find-scanner also tries to find out the type of
USB chip used in the scanner. If detected, it will be printed after the vendor and product ids. sane-find-scanner will even find USB scan-
ners, that are not supported by any SANE backend.
sane-find-scanner won't find most parallel port scanners, or scanners connected to proprietary ports. Some parallel port scanners may be
detected by sane-find-scanner -p. At the time of writing this will only detect Mustek parallel port scanners.
OPTIONS -h, -? Prints a short usage message.
-v Verbose output. If used once, sane-find-scanner shows every device name and the test result. If used twice, SCSI inquiry informa-
tion and the USB device descriptors are also printed.
-q Be quiet. Print only the devices, no comments.
-p Probe parallel port scanners.
-f Force opening all explicitly given devices as SCSI and USB devices. That's useful if sane-find-scanner is wrong in determining the
device type.
-F filename
filename is a file that contains USB descriptors in the format of /proc/bus/usb/devices as used by Linux. sane-find-scanner tries
to identify the chipset(s) of all USB scanners found in such a file. This option is useful for developers when the output of "cat
/proc/bus/usb/devices" is available but the scanner itself isn't.
devname Test device file "devname". No other devices are checked if devname is given.
EXAMPLE
sane-find-scanner -v
Check all SCSI and USB devices for available scanners and print a line for every device file.
sane-find-scanner /dev/scanner
Look for a (SCSI) scanner only at /dev/scanner and print the result.
sane-find-scanner -p
Probe for parallel port scanners.
SEE ALSO sane(7), sane-scsi(5), sane-usb(5), scanimage(1), xscanimage(1), xsane(1), sane-"backendname"(5)
AUTHOR
Oliver Rauch, Henning Meier-Geinitz and others
SUPPORTED PLATFORMS
USB support is limited to Linux (kernel, libusb), FreeBSD (kernel, libusb), NetBSD (libusb), OpenBSD (kernel, libusb). Detecting the vendor
and device ids only works with Linux or libusb.
SCSI support is available on Irix, EMX, Linux, Next, AIX, Solaris, FreeBSD, NetBSD, OpenBSD, and HP-UX.
BUGS
No support for most parallel port scanners yet.
Detection of USB chipsets is limited to a few chipsets.
13 Jul 2008 sane-find-scanner(1)